Search results for: '1603 0 door matic panic device in bronze'
-
Falcon Dor-O-Matic STK45 Surface Strike
Falcon Dor-O-Matic STK45 Surface Strike
This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.
US19-Black finish
STK45 -
Doromatic TD35 Roller Strike
The Falcon TD35 Roller Strike is used with the Dor-o-Matic Falcon 1590, 1790, and 2090 panic device where you are trying to protect the frame when the door closes. The strike has been manufactured since the 1970's. This part is also known as a Kawneer 133479 strike. The strike ships with mounting screws in a painted black finish. This style of strike is also known as a Blade Strike.
Doromatic Falcon Part # TD35 or 4270107393
GTD35 -
Dor-o-Matic 1690 Screw PB316
Dor-o-Matic 1690 End Cap Screw
#8 x 1-1/2” FPHTC
Doromatic part # screw.1072 or PB316
Dor-o-Matic 1690 Repair Parts Breakdown
GPB316 -
Dor-o-Matic 1990/2090 Dog Screw PB14
Dor-o-Matic 990/1090/199092090 dogging screw. This is the screw that holds down the cross bar when you tighten it.
The thread is 7/16-14.Doromatic part # SCREW.1022
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199014 -
Von Duprin EL99 Panic Device Only
This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.
The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.
EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system.
UL approved for Class II circuit applications.
The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS914 power supply.
The PS914 with the 9002RS option card is the minimum option card required. Other option cards available for other functions, see PS914 power supply for additional information.
Ships with all the mounting screws and the 299 Strike.
EL99EO-Dor-o-Matic 1690 Pinion Support Bracket PB312
Dor-o-Matic 1690 Pinion Support Bracket. Bracket holds pinion tip so that it will not slip
Doromatic part # BRKT.478, BRKT.133 or PB312
Dor-o-Matic 1690 Repair Parts Breakdown
GPB312Doromatic Exit Device 2090 Active Case
The Doromatic Exit Device 2090 Active Case is for use on the 1090 and 2090 panic hardware. This device has been around since the early 1970's, and is now called the Falcon 2090 Active Case, but it is the same piece. Includes all of the interior hardware. Just unscrew or loosen the three set screws and remove your old case and install and tighten the three set screws. Housing measures 7-1/2" long by 1-3/16" wide, mounting studs have a 6-1/4" center to center distance.
LEFT HAND HOUSING SHOWN IN PICTURE
4270902740 Left Hand Aluminum Stock
4270902742 Left Hand Dark Brown Stock
4270902743 Left Hand Black * One week lead time
4270902746 Right Hand Aluminum Stock
4270902748 Right Hand Dark Brown Stock
4270902749 Right Hand Black * One week lead timeG209001Dor-o-Matic 1690 Actuator Arm Brkt Assembly PB338
The Dor-o-Matic Falcon Actuator Arm Bracket Assembly is used on the 1690 and 2390 devices.
Doromatic part # BRKTASY.107 or PB338
Dor-o-Matic 1690 Repair Parts Breakdown
GPB338Von Duprin 2227 Panic Only
The Von Duprin 2227 Panic Only surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3-5/8". For doors as high as 7'1", if your door is higher than 7'1", please call. Ships with all mounting screws and the 299, 304L and 248L-4 Strike
2227EO-Von Duprin Panic Device 99 Knob Trim
The Von Duprin 990K Trim is known as a Knob Trim. This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building. If you have a different manufacture or a different Von Duprin series on the interior, it will not line up. On the back of this plate we usually find the number 990 stamped on it. The key locks and unlocks the knob. The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices. If you have a Mortise or Concealed Vertical Rod, call us and we will order that model. The plate measures 3" wide by 14-3/16" tall. Order here for the 990K-R&V.
99K-Detex ECL-230X Alarmed Deadbolt Panic Hardware-Single Point
The Detex ECL-230X Panic Device is a single point deadbolt device. One size fits 36 to 48 inch doors. The dead bolt has a 1 inch throw and is saw resistant. Locking and unlocking dead bolt always arms and disarms alarm. The alarm is 100 decibels and is powered by a 9 volt battery. Email for more information.
ECL-230Von Duprin Pull Handle 972466/972467
The Von Duprin Pull Handle 972466/972467 replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.
Von Duprin Part # 972466 and 972467
Old Part # 969925 and 959122G972466-Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Replacement Latch Bolt Assembly for the Falcon Dor-o-matic 1590. In the old days you could just replace the PB355 (SPRING.127) spring, but as of November 2015 you have to replace the complete latch head assembly.
Doromatic Part # 4270107603
Old Part # PB124GPB124Cal-Royal 45 Narrow Stile Rim Device
The Cal-Royal 45 Narrow Stile Rim Device is part of the new 4500 Series. They are designed for Narrow Stile doors with a minimum of an 1-3/4" stile width. This is a Grade 1 Exit Device, which is the highest traffic rating possible. Exit device ships with strike and mounting screws.
Shown is Left Hand Reverse
Opposite would be Right Hand Reverse45-RIMJackson Panic Device 1085 And 1095 Dogging Pin
The Jackson Panic Device 1085 And 1095 Dogging Pin is the piece that keeps the hardware in the open position during business hours. It is activated by pressing the crossbar and then turning the flat head screw driver head. The pin is held in the housings with a screw, which is located on the back of the housing. This pin has been used since about 1988 or so, the old style are no longer made, but they had a roll pin that was used to hold it in place. This package comes with a new spring, set screw and the pin. The Jackson part number on this is 30-1115.
G108554Sargent 2727 Panic Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warranty2727EO-Detex Advantex 10 Series Rim Device
Detex Advantex 10 Series Rim Device
The Detex 10 Series is a Super-Heavy-Duty panic device, built to with stand 1,000,000 cycles, twice the standard for Grade 1 rated devices. Designed for high-use and high-abuse environments. Non Handed with 1/4 turn hex dogging.
G10REO-8600 Adams Rite Concealed Vertical Rod
The Adams Rite 8600 Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors. The device will fit on stile widths of 2" or more. We recommend this device for replacement only, modifying your existing door to this exit device will be labor intensive. The 8611 would be for the aluminum finish and the 8622 would be or the dark bronze finish. We try to keep the Aluminum and Dark Bronze in stock in the 36" and 48" devices.
This device is not Electrified, please call for the Electrified Model.
8600-Dor-o-Matic 1990/2090 Allen Wrench PB30
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199010Dor-o-Matic 1990/2090 Spring Retainer SD45
Dor-o-Matic spring retainer. The retainer fits under the housing, by the dog screw and holds one end of the spring. The spring pin holds the other side.
Doromatic part # RETAIN.102
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199045
