Search results for: 'door series 30 partpush bar panic exit dor parts'
- Related search terms
- door series 30 pull bar panic exit dor parts 1309
- exit door panic devicemo square screw parts 1307
- exit door panic devicemo square screws parts Store room function 1308
- door series 30 push bar panic exit deep parts 1309
- exit door panic device square screws parts 1317
- exit door panic devices square screw parts 1317
- exit door panic devic square screws parts 1317
- door series 30 pull bar panic exit deep parts 1308
- door o matic 1 panic device 1309
- dooramatic door series 30 push bar panic exit devic parts 1314
-
Panic Hex Key 5/32" X 2-1/8" Long
The Panic Hex Key 5/32" X 2-1/8" Long is usually used on Dor-O-Matic, Falcon, Corbin Russwin, Von Duprin 55 and 88 and Yale panic hardware. This Hex Dog Key is not long enough for the Von Duprin 33, 34, 33A, 35B, 98 or 99 Exit Devices. Also known as Hex Key, Dog Key, Allen Key, Dogging Key
88R60-SHORT -
Von Duprin 22 Control Link Pin 050529
Von Duprin 22 Control Link Pin
The control link pin is the connector pin, that connects the latch head assembly to the push bar assembly. When the push bar is pushed in it retracts the latch bolt and the pin connects the two pieces. This Control Link Pin is used on the Von Duprin 22, 33A, 98 and 99 Panic Devices.
VON DUPRIN PART # 050529
Old Von Duprin Part # 969520G22R60 -
Dor-o-Matic 1690 Screw PB316
Dor-o-Matic 1690 End Cap Screw
#8 x 1-1/2” FPHTC
Doromatic part # screw.1072 or PB316
Dor-o-Matic 1690 Repair Parts Breakdown
GPB316 -
Von Duprin 2670 Guard-X Panic Device
Heavy Duty Design
The new Series 2670 Exit Alarm Lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1 1/4" (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.Fits 36" to 48" doors.
Uses 9 volt battery
Ships with all mounting hardware and strike.2670EO- -
Jackson 30-2674 1285/1295 Cover Package
Jackson 30-2674 1285/1295 Cover Package
Jackson part # 30-2674-313 and 30-2674-628 Cover Plate for use on the 1285 and 1295 devices.. Plates measure 2-11/16" x 7-1/2 and 2-11/16" x 2-1/8", two plates in each package.
Jackson Part #'s 30-2674-313 and 30-2674-612
G302674- -
Norton Door Closer 7700 Series Power Track Arm
Norton 7700 Series Power Track Arm
Arm is shipped will all of the necessary hardware. This assembly includes the 7701ST-1AT Adjusting Head and Tube Assembly, and the 7701ST-1AR Adjusting Rod Assembly. The square shaft measures 7/16" x 7/16". The aluminum finish ships within 24 hours, dark bronze will take a little longer.
Norton Part # 7701ST-1A
7701ST1A- -
Von Duprin 98 Exit Device
The Von Duprin 98 Rim Panic device has been around since the late 1970's and has gone through a couple of improvements. One of the great things about the 98 is the availability of replacement parts. Even when the device is upgraded, the upgraded parts will work with the older versions that can be close to 40 years old. This device is for all types of single and double doors with mullions. The device is UL Listed for Panic Exit Hardware and is considered Grade 1, the heaviest duty rating possible. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed, meaning it will work on Left and Right hand doors. Ships with all the mounting screws and the 299 Strike.
98EO -
Rixson 27 Series Door Closer
• Available (NHO) non-hold open,
(SHO) selective
hold open. Specify degree (90, or
105°)
• Standard top pivot: 180 included
• Cycolac cement case
• Separate independent valves for closing,
latch and backcheck adjustments
• Built-in positive dead stop prevents door
from swinging beyond the desired
opening degree
• Vertical door adjustmentWhen Less All Parts is selected only the Cylinder is shipped, just the replacement hydraulic cylinder will be shipped
27-RIX -
Sargent 646 Surface Strike
The Sargent 646 Surface Strike is used on the 20, 30 and 80 Series Surface Vertical Rod Panic Hardware and Fire Rated Hardware. It is used as a strike for the top latch. The strike measures 1-5/32" x 3-11/16" with a 3/4" projection. Strike features a black coated epoxy finish.
Sargent Part #646
G646 -
Dor-o-Matic 1690 Pinion Support Bracket PB312
Dor-o-Matic 1690 Pinion Support Bracket. Bracket holds pinion tip so that it will not slip
Doromatic part # BRKT.478, BRKT.133 or PB312
Dor-o-Matic 1690 Repair Parts Breakdown
GPB312 -
Von Duprin Panic Device 880TP Trim
The Von Duprin Panic Device 880TP Trim is for the 88 series only. The stanchions welded on the back line up with the 88 device on the interior. The optional key cylinder locks and unlocks the thumb piece. The plate measures 3" wide by 14-3/16" long with an 1-5/8" bore hole for cylinder.
Von Duprin part # 880TP-R
88TP- -
Von Duprin 9927 Panic Device
Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The Von Duprin 9827 device has a smooth mechanism case and the Von Duprin 9927 device has a grooved case. The surface vertical rod device is non-handed.
9927EO- -
Detex ECL-230D Alarmed Panic Device
The Detex ECL-230D Alarmed Exit Device is a battery operated, rugged deadbolt panic device. The steel paddle is photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits. The device features a single point 1" dead bolt, attack resistant design withstands over 2200 pounds of outside pull force and is non handed. Locking and unlocking the dead bolt always arms and disarms the alarm. Rim Cylinder is not included.
If you have a door that requires Panic Hardware, then use the ECL-230D-PH
ECL230D- -
Push Bar 1' Diameter 422
The Push Bar 1' Diameter 422 can be used on any door, but is usually found on aluminum framed glass store front doors. They are constructed of 1" diameter solid aluminum, stainless steel, bronze or brass depending on your select finish. The bar has a 2-1/8" projection and 1-1/8" clearance. The push bar ships with thru bolts and finish washer in matching finish. Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.
422 -
Jackson 1085 30-1242 / 30-1243 Lever Arms
The Jackson 1085 30-1242 / 30-1243 Lever Arms are for use with the Jackson 1085 Housings, both sides. And the Jackson 1095 Inactive (hinge side) Housings. To determine hand, stand inside and look out the door, what is side is the arm on? If it is on the Right then order Right.
G10852x -
International Door Closer 784 Series
The International Door Closer 784 Series was discontinued about 10 years ago, but we still have some stock left.
FEATURES
Three Adjustment Valves: Closing and Latching
and back checkspeeds controlled by separate regulating Valves,
Universal application Non-handed for standard top
jamb or parallel arm installation.3/4" x 8-3/16" mounting holes
784- -
Dor-o-Matic 2390 Lift Bracket BRKT.143 PB336
Doromatic 2390 Lift Bracket
This cadium plated bracket attaches to the concealed vertical rods. When the push bar is depress, it raises and lowers the brackets and the rods. The bracket measures 2-7/8" long by 5/8" wide and has an overall projection of 3/4"
Falcon / Doromatic Part # BRKT.143
GPB336 -
Detex Advantex 10 Series Rim Device
Detex Advantex 10 Series Rim Device
The Detex 10 Series is a Super-Heavy-Duty panic device, built to with stand 1,000,000 cycles, twice the standard for Grade 1 rated devices. Designed for high-use and high-abuse environments. Non Handed with 1/4 turn hex dogging.
G10REO- -
Detex ECL-230D-PH Alarmed Panic Device
The Detex ECL-230D-PH Alarmed Exit Device is a battery operated, rugged deadbolt panic device, and is UL-Listed Panic Hardware for 36" to 48" doors. The steel paddle is photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits. The device features a single point 1" dead bolt, attack resistant design withstands over 2200 pounds of outside pull force, and is non handed. Locking and unlocking the dead bolt always arms and disarms the alarm. Rim Cylinder is not included.
ECL230DPH- -
Von Duprin Panic Device 880NL Trim
The Von Duprin Panic Device 880NL Trim is for the 88 Series only. The stanchions welded on the back of the plate line up with the88 device on the interior. Optional key cylinder locks and unlocks the device, and can be used for dogging the door open. Plate measures 3" wide by 14-3/16" long, with an 1-5/8" bore for cylinder.
Von Duprin part # 880NL-R
880NL -
Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft
The Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft is the piece that your dog key (allen wrench) fits into the lock the device in the open or dogged position. This shaft is used on the 1690, 1790, and 2390 device. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. The part that the hex key fits into is only about 1/4" deep, because of that these tend to get rounded out, so the key will not move the shaft.
To remove the old shaft just pull with a pair of Channel Locks or Pliers. To reinstall, just press it back in to position, you might have to bend the holding tabs back down, but we very rarely have to do this. The manufacture part number on this is SHAFT.101.
GPBX16-SHF -
International 300 Series Adjustable Power Door Closer
The International 300 Series Adjustable Power Door Closer is one of there new closers to meet ADA requirements. With this door closer you can adjust the spring tension, closing and latching speed, even after it was installed. The Spring Power is adjustable all the way down to 8-1/2 pounds of resistance, making it ideal for areas with the elderly and children.
Hydraulic Cylinder only
3000-B-310 105 with Hold Open
3000-B-311 105 with No Hold Open
3000-B-312 90 with Hold Open
3000-B-313 90 with No Hold Open3000-B -
Dor-o-Matic 1990/2090 Allen Wrench PB30
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199010 -
Von Duprin 9975 Panic Device Only
Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed
9975EO -
Glynn-Johnson Overhead Door Holder 70 Series Surface Mounted
Glynn-Johnson 70 Series Overhead Door Holder Surface Mounted are constructed primarily of Brass and 300 series Stainless Steel substrates, with several components fabricated of Steel treated to resist corrosion. Models in the 70 series utilize a 1/2"-diameter stainless steel bar, while the 79 series uses a 3/4" stainless steel bar. The bar is always provided in US32D. The spring, washer and nut are provided in a clear zinc finish.
GJ70 -
Crash Chain Door Stop CS115
Crash Chain Door Stop CS115
- Specially designed for full-size exterior doors.
- Tear resistant, grey vinyl cover.
- Heavy duty compression spring assembled to both ends of chain
and end brackets. - Packed with sheet metal screws.
- Cast Brass brackets with solid, welded steel chain.
Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
by the location of your door closerPART # LENGTH
GCC205 20-1/2"
GCC255 25-1/2"
GCC305 30-1/2"GCC205-