Search results for: 'latches+kick+for+bathroom+doors'
- Did you mean
- latch kick for bathroom doors 0
- latches kick for bathroom door 0
-
-
Clear Plastic Kick Plates-8 x 30 inches
Clear Plastic Door Kick Plate
.125 inch thickness
Clear Acrylic
Custom sizes width x height x .11 = Cost $
GKP830CP -
Ives RL30 Roller Latch
Ives RL30 Roller Latch
The Ives Roller Latch RL30 is constructed of Forged Brass and Plated to your finish. Furnished with a Nylon Roller. Body measures 1" wide by 3-3/8" high by 1-11/16" deep. The roller has a maximum projection of 3/8" and is easily adjustable.
RL30- -
Ives RL32 Roller Latch
Ives RL32 Roller Latch
The Ives RL32 Roller Latch is constructed of Brass and Plated to your desired finish. The body measures 1-1/8" wide by 2-1/4" high and 2-1/4" deep. The roller is constructed of Nylon, and has an adjustable projection up to 1/2". Fits a standard heavy-duty cylindrical lock cutout.
RL32- -
Diamond Plate .125 Aluminum Door Kick Plate
The Diamond Plate Aluminum Door Kick Plate are solid aluminum. They are 1/8" thick and have a gloss or polished finish. These plates have the Diamond pattern, and the diamonds are 1-1/8" long. Custom sizes are available, they run about $0.39 per square inch. The lead time on these plates is about 7-10 days.
GKP-DP -
Brushed Bronze Door Kick Plate-6 x 28 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP628-US10 -
Brushed Bronze Door Kick Plate-8 x 28 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP828b-US10 -
Brushed Bronze Door Kick Plate-8 x 30 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP830b-US10 -
SEM7850-828 Armature for LCN Electro Magnetic Door Holder
SEM7850-828 Armature for LCN Electro Magnetic Door Holder features a metal die cast construction armature. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 2-5/8". Available in an aluminum or dark bronze color. Armature extensions are available, along with replacement covers, magnets, and armatures.
LCN Part # SEM7850-828
SEM7850-828- -
Black Anodized Aluminum Kick Plate-6 x 30 inches
The Black Anodized Aluminum Kick Plate-6 x 30 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP630BLK -
Bilco Barracuda DSO-PB for Out Swinging Doors with Panic Devices
The Barracuda DSO-PB is for use on Out Swinging 36" Doors with Exit Devices. It is constructed of heavy duty steel with a durable powder coated finish. The bar goes across the door frame and grabs the mounting cleat with an adjustable clamp. To secure the door, simply turn the handle until it is secured. They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4". This device ships with all of the hardware and a wall mounting rack for storage.
DSO-PB -
Satin Nickel Door Kick Plate : 8" x 34" Satin Nickel
Satin Nickel Door Kick Plate : 8" x 34" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP834sn -
Satin Nickel Door Kick Plate : 6" x 34" Satin Nickel
Satin Nickel Door Kick Plate : 6" x 34" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP634sn -
Satin Nickel Door Kick Plate : 8" x 32" Satin Nickel
Satin Nickel Door Kick Plate : 8" x 32" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP832sn