Search results for: 'hand cycl part'
-
Von Duprin 8827 Bottom Vertical Rod Assembly 050455
Von Duprin 8827 Bottom Vertical Rod Assembly
This bottom vertical rod is used on non fire rated doors. The rod includes the bottom rod connector. The rod is 31-7/8 inches long, excluding the rod connector.
Von Duprin Part #050455
Old Part #101777 and 103234
88VR150- -
Dor-o-Matic 1690 Hex Soc Set Screw PB317
Dor-o-Matic 1690 Hex Socket Set Screw-PB317
1/4-20 x 3/8"
Doromatic part # SCREW.1067 or PB317
Dor-o-Matic 1690 Repair Parts Breakdown
GPB317 -
Dor-o-Matic 1990/2090 "E" Ring RRing.109
The Dor-o-Matic 1990/2090 "E" Ring RRing.109 is use to connect the concealed rods to the Traveller Assembly (G199028, PB88, or 4270100013). The rods fit through the traveller and rod bushings, and the Retaining Ring holds them in place. This piece has a diameter of 1/2". This item is now under the Falcon name plate.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199004 -
Norton Door Closer Arm Shoe Assembly
Norton / Yale Door Closer Arm Shoe Assembly
Replacement Shoe Assembly for Norton 1600, 9300, 7500 and 8000 series door closers. And Yale 50, 2300, 8000 and 4400 series.
Base measures 11/16" x 2-1/4" with 1-3/4" center to center screw hole mounting. Bracket projects out 15/16". The pin is 3/8" diameter.Norton part # 7701AS or a Yale # 400-AS
Old Norton Part # 1620AS
7701AS- -
Dor-o-Matic 1690/1790 Screw PB345
Dor-o-Matic 1690/1790 Lock Stile Screw
Doromatic part # SCREW.1077 or PB345
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB345 -
Corbin Russwin 651F61 Red Lever Spring
The Corbin Russwin 651F61 Red Lever Spring is the same part as the Yale Lever Trim Spring. Used on Yale and Corbin Russwin LHR or RH Doors on there outside trim Lever Handles. The spring has an 1-1/4" OD and 1-1/8" ID.
Yale Part # 60-7000-1225-999
Corbin Russwin # 651F61
G651F61 -
Dor-o-Matic 1690 Pinion Support Bracket PB312
Dor-o-Matic 1690 Pinion Support Bracket. Bracket holds pinion tip so that it will not slip
Doromatic part # BRKT.478, BRKT.133 or PB312
Dor-o-Matic 1690 Repair Parts Breakdown
GPB312 -
Von Duprin 8827 Bottom Latch Case 050461
The Von Duprin 8827 Bottom Latch Case 050461 is used on all Von Duprin 8827 non fire rated exits. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. Included mounting screws.
Von Duprin Part # 050461
Old part # 10175188VR170 -
Von Duprin Thumb Piece 970488
The Von Duprin Thumb Piece 970488 is just the thumb piece only, rivet not included. Cast bronze construction, and then plated to the selected finish. 5-1/8" overall length, but note that the length is usually cut down in the field depending on the thickness of your door.
Von Duprin Part # 970488
Old Part # 960303
G970488- -
Dor-o-Matic 1990/2090 "E" Ring PB4
Dor-o-matic 1990/2090 Pivot Pin E Ring. This ring is used on the Pivot Pin G199013.
7/16" diameter
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199044 -
Von Duprin Strike 304L Bottom Strike
This Von Duprin Strike 304L Bottom Strike is used for the bottom latch of the 2227, 8827, 9827 and 9927. The strike measures 1-7/8" by 1-7/8" out dimension of the square flange, with an inside dimension of 1-1/8" by 1-1/8". The part that is inserted into the floor is 1-5/16" x 1-5/16" and drops down 13/16". Also known as a Von Duprin Floor Mounted Mortise Strike.
Von Duprin Part # 304L
304L -
Dor-o-Matic 1790 Channel Spacer PB326
Dor-o-Matic 1790 Channel Spacer. This part is used on Dor-o-Matic 1790's with an outside key cylinder.
Doromatic part # SPACER.107 or PB326
Dor-o-Matic 1790 Repair Parts Breakdown
GPB326 -
Door Sweep 1" Long Rubber
The Door Sweep 1" Long Rubber has an over height of 1-7/8", with 1" of it being the gray rubber seal. The mounting rail is constructed of extruded aluminum and is available in aluminum or dark brown finishes. This sweep ships with screws.
International Part # IDC-97V
IDC97V- -
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Falcon Doromatic 1690, 1790, and 2390 replacement dogging assy. The dogging assembly is used to dog the door in the open position, so people can enter the building without having to unlatch the door for the inside or with a key on the outside. The KIT.1197 comes complete with mounting screws. Some of the earlier version where riveted into the rail, so you might need to drill out the rivets, the screws shipped with KIT.1197 have self tapping thread forming screws.
Doromatic part # KIT.1197
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPBX16 -
Von Duprin 8827-F Top Latch Kit 050462
The Von Duprin 8827-F Top Latch Kit 050462 is the Top Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Duprin Part # 050462
Old Part # 10267688VR10F -
Von Duprin 8827 Special Chassis Nut 050277
Von Duprin 8827 Special Chassis Nut 050277
The 8827 Special Chassis Nut goes on the ends of the 8827 Chassis Tie Rod. The Nut is threaded all the way through so the cover mounting screws can then be threaded on it also. The nut is 3/8" long by 1/4" hex.
Von Duprin Part # 050277
Old Von Duprin Part # 96065288VR190 -
1990/2090 Dor-o-Matic Stud Housing Mounting PB2
Doromatic Mounting Stud. Male stud mounts to the door and the housing slides over.
Doromatic part # PB2 and also STUD.101
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199002








































