The Door Pull Handle 21 has a cross section dimension of 1/2" x 1" and is made of half round (underside is round) stock. The handle projects out 2-1/8" with a clearance of 1-5/8". This handle is available in 6" and 8" center to center mounting holes, but can be made in different Center to Center dimensions. This product is also known as a Door Handle or Door Grip. The handle ships with thru bolts and matching finish washers.
The Von Duprin 9927 Center Case 050021 center case replaces all earlier versions of the 9827 and 9927 Center Cases. Everything shown in the picture is included with the product. Along with all the mounting screws.
The Von Duprin Panic Device 55 Center Case 050183 is a replacement housing for the 55 Rim Device. The housing includes all of the internal workings and latch bolt. Von Duprin Part # 050183.
The Concealed Mount Push and Pull Plate Sets feature an 1/8 inch push plate with a 1/20 inch plate plate. The handle is surface mounted with thru mounted studs. 8 inch center handles are 3/4 inch diameter, 10 in and 12 inch center handles are 1 inch diameter.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
Replacement Center Case for the Monarch-Falcon 24-R Narrow Stile Rim Device. This Center Case is for use on both the Fire Rated and Non Fire Rated devices. This was changed in the summer of 2018. The 650233 has been replaced by the 650234, which was the Fire Rated version part number.
Replacement Center Case for the Falcon 24-V Narrow Stile Surface Vertical Rod Device. This Center Case is the same for the Fire Rated and Non Fire Rated devices.
The Von Duprin Exit Device 2227 Center Case 109358 replaces worn out Von Duprin 2227 Surface Vertical Rod Center Cases. The center case has been the same for the last 30 years.
Von Duprin Part # CASE.107 Old Von Duprin Part # 109358
The Jackson Door Closer Center Hung Arm 20-2085 is for double acting center hung doors for use with the 20-330 concealed closer. The arm measures 9-1/2" long by 1-3/8" wide by 19/32" thick.
The Von Duprin Panic Device 8827 Center Case 050415 is for use on the non fire rated 88 surface vertical rod. You can tell the difference by the dogging screw. If you have a Dogging Screw on your device, then this is the correct part. Includes the internal pieces, including the Rod Control.
The Jackson Door Closer Center hung Arm - 20-400B is used with the 20-330 door closer. This arm is for use with double acting, center hung doors. The arm measures 10" long by a 1-1/2" wide and 1/2" thick.
The Von Duprin 88 Center Case Rivet 090002 is also known as the Latch Tail Rivet used on the 88 Rim Device. The Rivet fits into the spring and into the Latch Tail 050500. The rivet measures 1-1/4 inches long less the head, with a 1/8 inch diameter. We sell this piece individually.
The Von Duprin 55 Center Case Axle 090050 is used on the Rim Panic Hardware only. The Rim device is one that has a latch bolt sticking out of the housing.
The Sargent 2828 / 2838 Center Case Cam is the Cam that the key cylinder actuates to open the door. The Cam is located in the middle of the Center Case. We can no longer get the retaining ring to hold it in place.
The Falcon 25-R Center Case Kit 650239 for non Fire Rated Doors. A non Fire Rated door is usually an exterior door, or a door that is not designed to contain the spread of fire.
The Von Duprin 2227 Center Case Cover 968888 comes in an Aluminum SP-28 or Dark Brown SP-313 color. This piece is for used on the 2227 Surface Vertical Rod Panic Hardware. Package also included mounting screws.
The Von Duprin 22 Rim Center Case Cover 968603 is for use on the 22 rim devices. The cover comes with mounting screws and is available in aluminum SP-28 or dark brown SP-313.
The Dorma 8400 Center Case Cover is used the 8000 Series Surface Vertical Rod Devices. The cover is black plastic, the screws are not included. Dorma Part # CHCOV84
One inch diameter solid push bar, 2-1/4 inch projection with 1-1/4 inch clearance and 33-1/16 inch centers. One side is thru bolted the other is mounted on a surface mounted stud.
The Falcon / Monarch 25-V Center Case Kit 650242 for non Fire Rated Doors. The Center Case on the Monarch Falcon 25-V is the same for the Fire Rated and the Non Fire Rated.
The Jackson Panic Device Center Case 1085/1095 is for use with the 1085 devices for both and left, and the inactive case of the 1095. Case is easily removed by loosening the two 1/8" Allen screws and one on the bottom. Includes everything in the housing. The distance between the mounting studs on this Case is 6-5/16"
Jackson part # 30-982 Right Hand Body and Arm Assembly Jackson part # 30-983 Left Hand Body and Arm Assembly
GHE21
