Search results for: 'matic 4 spindl door reinforced'
-
Reinforcing Pivot Hinge
The reinforcing pivot hinge is a good way to solve door sag issues. And also be a preventative solutions for future isses with extra heavy or wide doors. The hinges comes in two sizes 4 or 4.5 inches, and two finishes, prime coat and satin chrome. The hinge uses a heavy duty ball-bearing to add extra life. The base metal is steel.
GBB85 -
Reinforcing Pivot Hinge 4"
Reinforcing Pivot Hinge 4" - for use with a 4" wide butt hinge
1/2" to center line of 4" hinge.
Used to strengthen and reduce vibration
to your current full mortise butt hinges.
Made of Zinc Plated SteelThese hinges are not longer handed. Please select hand when checking out, until our system is updated.
DX1921 -
Reinforcing Pivot Hinge 4-1/2"
Reinforcing Pivot Hinge - For use with 4-1/2" wide butt hinges
3/4" to center line of 4-1/2" hinge pin.
Pin uses large pin and bushing.
Used to dampen vibration and increase
strength to your full mortise butt hinges.
Constructed of heavy duty cold rolled steel.
Made of Zinc Plated Steel
Supports weights up to 300 lbsManufacturer part # B1923
Our part # DR1923 for Right Hand, DL1923 for Left HandThese hinges are no longer handed, you can select right or left, but the hinges will work both ways.
B1923 -
-
Sargent 700 ET Spindle Kit 730-7
Sargent 700 ET Spindle Kit 730-7
This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors. Shank measures 4-1/4" long, square spindle is 5/16" square.
Sargent Part # 730-7
G7307 -
-
Dor-o-Matic 1990/2090 Crossbar Screw 1/4- 20 X 1" PB12
Dor-o-Matic 990/1090/1990/2090 Cross Bar Screw
Doromatic part # SCREW.1027
1/4-20 x 1" Self Tapping Threads
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199012 -
LCN Door Closer Hold Open Head And Tube 3048 - 3048L
The LCN Door Closer Hold Open Head And Tube 3048 - 3048L. As the arm rotates the pivot point threads close on to the mounting bracket face and create a friction catch. If yours is new, try rotating the mounting plate 180 degrees so the threads tighten as it closes. This replacement part from LCN either breaks or wears out. The material some times wears out due to the friction of open and closing. But the biggest issue seems to be the point where the tube mounts to the cast iron connector.
Specify your current closers model number when ordering. Not all of the LCN closers have the same shape spindle on the door closer cylinder. Model Available here are the:
1260-3048
1260-3048L
1460-3048
1460-3048L
4010-3048
4010-3048L
4020-3048
4020-3048L
4040-3048
4040-3048L3048 -
Corbin Russwin 32 Spindle
Corbin Russwin 32 Spindle
Also known as the Cobin 409F068, Russwin #32, and Corbin 360F78.
20 tpi
4-3/4" long
1 solid center
3 pin holes one sideGS32 -
Dor-o-Matic 1690/1990 Top Strike PB48
The Dor-o-Matic 1690/1990 Top Strike PB48 is used on the Dor-o-Matic 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB48.
Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
Dor-o-Matic/Falcon 1690 Repair Parts BreakdownG199034 -
Yale 1174 Spindle
Yale 1174 Spindle
Threaded side 3" long, pin hole side 2-3/8"
overall length is 5-3/8",
20 Threads per InchGS1174 -
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Falcon Doromatic 1690, 1790, and 2390 replacement dogging assy. The dogging assembly is used to dog the door in the open position, so people can enter the building without having to unlatch the door for the inside or with a key on the outside. The KIT.1197 comes complete with mounting screws. Some of the earlier version where riveted into the rail, so you might need to drill out the rivets, the screws shipped with KIT.1197 have self tapping thread forming screws.
Doromatic part # KIT.1197
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPBX16 -
Falcon / Doromatic Door Closer 3077/PA Regular Arm Only
Dor-o-Matic Door Closer Regular Arm Only. This is the standard regular arm for the SC60, SC70, and SC80 Doromatic Door Closers
Doromatic part # SC60 - SC60-3077/PA, SC70 - SC70-3077/PA, SC80 - SC80-3077/PA
Choose Color and Doromatic Falcon Model Number (Function)
3077/PA -
Continuous Full Mortise Hinge
The Ives 112HD Continuous Full Mortise Hinge Geared Hinge measures 83" long and is constructed of extruded aluminum. This hinge is non handed, and will work on doors up to 48" wide and 450 pounds. You can easily cut this hinge in the field if your door is less than 83" high.
GFM100- -
Dor-o-Matic 1690/1990 Bottom Rod Guide
Dor-o-matic bottom rod guide. Fits up inside the door to take up slack in bottom rod. Also known as the GPB134 and G1990134
Doromatic part # 4270107176
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownG199HEX -
Dor-o-Matic 1690 Screw PB316
Dor-o-Matic 1690 End Cap Screw
#8 x 1-1/2” FPHTC
Doromatic part # screw.1072 or PB316
Dor-o-Matic 1690 Repair Parts Breakdown
GPB316 -
Dor-o-Matic 1990/2090 Dog Screw PB14
Dor-o-Matic 990/1090/199092090 dogging screw. This is the screw that holds down the cross bar when you tighten it.
The thread is 7/16-14.Doromatic part # SCREW.1022
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199014