Door Closer Arms
Dor-o-Matic Falcon Door Closer Regular Arm Only. This is the standard regular arm for the SC60, SC70, and SC80 Doromatic Door Closers
Doromatic Falcon part # SC60 - SC60-3077/PA, SC70 - SC70-3077/PA, SC80 - SC80-3077/PADO3077As low as $95.88
The Jackson Door Closer Offset Arm - 20-1312-LC is the replacement arm and track for the Jackson 20-330 Door Closer. The track measures 12-7/8" long by 1/2" thick, and the arm has an overall length of 12-15/16" long with an offset of .826". This set is for use with single acting doors with a 3/4" offset. Package includes the arm and track.
Jackson part # 20-1312-LCG201312LC$128.37
The LCN Door Closer Regular Arm 3077 ships with 95 percent of there door closers. This is the standard regular. Specify your current closers model number when ordering. Not all of the LCN closers have the same shape spindle on the door closer cylinder. The fitting for the 4040 is a six sided, the 4010, 4020 and 4110 have a flat sided oval, and the 1260 and 1460 have an eight sided star. The LCN Part #'s on this Regular Arm is: 1260-3077, 1460-3077, 4010-3077, 4020-3077, and 4040-3077. If your model is not here, call us and we will quote you a price.3077As low as $130.25
The International Door Closer 526 Parallel Arm Bracket is one of two they offer. This bracket us usually used with the Hold Open Arm 522, and is stronger than the 525 Parallel Arm bracket that ships with the closers.G526-As low as $10.44
Norton CloserPlus Hold Open Arm
This heavy duty Parellel Arm can be used with the Norton 1600, 9300, 8000 and 7500 door closers. The knob on the main are locks and unlocks the arm to hold your door open.
Aluminum is in stock, Dark Bronze is 2-3 week lead time.
Norton Part # 6870T-86870T-8-As low as $240.75
Norton CloserPlus Non Hold Open Arm
This heavy duty Parallel Arm can be used with the Norton 1600, 9300, 8000 and 7500 door closers.
Aluminum is in stock, Dark Bronze is 2-3 week lead time.
Norton Part # 6770-56770-5-As low as $183.14
Norton 7700 Series Power Track Arm
Arm is shipped will all of the necessary hardware. This assembly includes the 7701ST-1AT Adjusting Head and Tube Assembly, and the 7701ST-1AR Adjusting Rod Assembly. The square shaft measures 7/16" x 7/16". The aluminum finish ships within 24 hours, dark bronze will take a little longer.
Norton Part # 7701ST-1A7701ST1A-As low as $120.61
The International Door Closer Arm and Track 3020-VO is for offset top arm assemblies, with the track mortised in the top of the door. This track and arm are for the 7/8" depth of top rail application. Track measures 12-5/8" long by 1/2" high by 1-1/4" wide. For use with the 2000, 3000 and 5000 series concealed closers.3010-VO$66.39
The International Door Closer Arm 3010-PT is for end loading top arm assembly (7/8" depth top rail). All screws included with package. This arm is for center hung concealed closer applications. For use with the 2000, 3000 and 5000 series International Door Closers.3010-PT$33.40
The LCN 4040SE-3077T Sentronic Door Closer Arm is only for use with the 4040SE. If you have another LCN Sentronic Model, we can special order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door.
LCN Part # 4040SE-3077T4040SE-3077T-As low as $157.44
The Dorma 8831 Top Arm for RTS88 is for use on Single and Double Acting doors. This arm is known as a side load arm, and usually has a notch in the door at the top to access the arm fastening block. This piece measures 10-1/2" long by 1-3/8" wide at the widest part, and is 1/2" thick. This is the standard arm in the RST01 and RST02 Packages.
Dorma Part # 8831G8831$125.24
Norton / Yale Door Closer Hold Open Parallel Bracket
Replacement bracket works with the Norton 1600, 9300, 7500, and 8000 series, along with the Yale 50, 3000, and 4400 series hold open closers.
Norton Part # 1628H
Yale Part # 5881600HPA-As low as $32.75
The Norton / Yale Door Closer 7701-3 Hold Open Arm is the standard hold open arm shipped with Norton and Yale Door Closers. It is known as a Friction Hold Open, because as the arm rotates it tightens down two plates together. Adjusting the large hex bolt on the Hold Open Assembly determines where the arm will hold open. This part has had a couple of numbers over the years 7701-3, 1620-3 for Norton and 400-3 for Yale.16H00-As low as $144.73
The Corbin Russwin Door Closer Hold Open Arm has been around for the past 40 years. This replacement hold open arm will work on the older Corbin 100, 110, and 120's, and the Russwin 2800, 2810 and 2820's. Along with the DC3210 and DC6210 Door Closers. This is considered a Friction Hold Open Arm because as the arm rotates the arm tightens on itself and holds the arm in the open position. This arm is also known as the A1 arm. Corbin Russwin part # 688F77.2800HOAAs low as $193.56
The Sargent Parallel Arm Bracket 125-P is for use with the 25-O regular arm, to convert it to a parallel arm mount. A parallel arm mount is when the door closer is mounted on the push side of the door and the arm is parallel to the door when in the closed position.
Sargent part # 125-P9350PAB-As low as $31.28
Sargent H.D. Holder Stop Arm
Sargent part #25-PSH350PSHA-As low as $327.56
The Sargent Regular Arm 25-O is now used on all of there commercial grade closers. This is the standard arm shipped with about 90 percent of there closers. This arm is for use with the 350, 1430, and 281 closers, and will work on the 1230 and 1250 models also.
Sargent Part # 25-0350RA-As low as $148.15
Norton / Yale Door Closer Arm Shoe Assembly
Replacement Shoe Assembly for Norton 1600, 9300, 7500 and 8000 series door closers. And Yale 50, 2300, 8000 and 4400 series.
Base measures 11/16" x 2-1/4" with 1-3/4" center to center screw hole mounting. Bracket projects out 15/16". The pin is 3/8" diameter.
Norton part # 7701AS or a Yale # 400-AS
Old Norton Part # 1620AS7701AS-As low as $26.00
The Corbin Russwin Regular Arm Parallel Bracket is the standard bracket shipped by them for the past 40 years. This replacement bracket will work on the older Corbin 100, 110, and 120's, and the Russwin 2800, 2810 and 2820's. Along with the DC3210 and DC6210 Door Closers. This bracket is required if your are going to use a parallel arm mounting, which is when you have the closer mounted on the door, on the push side of the door. Corbin Russwin part # 188F41-8.2800PAAs low as $17.87
This is the New Style International Door Closer 522 Hold Open Fore Arm. In July of 2014, the old style was discontinued. Look under "More Views" to see the Old Style. Shown in Dark Bronze, ships with all components in the picture.
International part # 522G522-As low as $34.79
The International Door Closer 525 Parallel Bracket is the standard bracket shipped with most of there closers.G525-As low as $6.96
Rixson 27 Series Bottom Arm Package 252050
This kit included the Arm Cap & Screw, Offset Arm, Arm Shim, Arm Bearing Washer, and Spindle Shouler Collar.
Rixson Part # 252050G252050As low as $163.78
Norton Unitrol Hold Open Arm
Used on the Norton 1600, 8000 and 7500 door closers. Parallel Arm mounting only.
Norton # Door Size
6100-4 42-48"6100-HOAs low as $476.15
LCN Door Closer Fusible Link Arm
Adjustable nut allows door closer arm to lock when the preselect position is reached. Fusible Link will hold door until heat melts the "Link" and then the door will shut. Used on Fire Doors to control a spreading fire.
Specify your current closers model number when ordering.
Not all of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Fusible Link Arm is: 4010-3049FL, 4020-3049FL, 4110-3049FL3049FLAs low as $284.04
The International Door Closer Arm 3010-K is for end loading top arm assembly (5/8" depth top rail). All screws included with package. This arm is for center hung concealed closer applications. For use with the 2000, 3000 and 5000 series International Door Closers.3010-K$29.23
LCN Door Closer Spring Cush Hold Open Arm 3049SC
Optional, parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function.
Specify your current closers model number when ordering. Not all
of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Regular Arm is: 1460-3049SC, 4040-3049SC, 4110-3049SC3049SCAs low as $321.22
The LCN Door Closer Spring cush Arm 3077SC is an optional arm offered by LCN. The arm features a solid forged steel main arm and forearm with a spring loaded stop in the soffit shoe, which makes this arm ideal for abusive parallel arm applications. Specify your current closers model number when ordering. Not all of the LCN closers have the same shape spindle on the door closer cylinder. The LCN Part #'s on this Regular Arm is: 1460-3077SC, 4040-3077SC, 4110-3077SC3077SCAs low as $281.78
LCN Sentronic Door Closer Arm - 4110SE-3077T
LCN part # 4110SE-3077T
This arm will only work on the 4110SE. If you have another LCN Sentronic Model, we can order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door, see diagram4110SE-3077TAs low as $145.78