Sargent
-
Sargent Exit Device 20/30/60 End Cap And Bracket
The Sargent Exit Device 20/30/60 End Cap And Bracket is a part we put together here for your convenience. Sargent only sells these components separately. Usually only the cap goes missing, but every once and while the bracket goes missing also. The package is used on the all of the 20, 30 and obsolete 60 series devices.
Sargent Part # 68-0434, 68-2141, and 97-0052
G20300 -
Sargent 20/30/60 End Cap Bracket
The Sargent 20/30/60 End Cap Bracket is used with the larger end cap. This end cap has been manufactured for the last 40 years and started its life on the obsolete 60 Series. The bracket holds the hinge side of the exit device on the door, and the G20300C fits over the top of it.
Sargent part #68-2141
G20300B -
Sargent 646 Surface Strike
The Sargent 646 Surface Strike is used on the 20, 30 and 80 Series Surface Vertical Rod Panic Hardware and Fire Rated Hardware. It is used as a strike for the top latch. The strike measures 1-5/32" x 3-11/16" with a 3/4" projection. Strike features a black coated epoxy finish.
Sargent Part #646
G646 -
Sargent 624 Bottom Surface Strike
The Sargent 624 Bottom Surface Strike is used on the 20, 30, 60, 80 and 90 Series Surface Vertical Rod Panic Hardware. The Strike is mounted on the floor and the bottom latch locks on to it. Strike measures 9/16" x 2-1/2" with a 3/8" projection. Strike features a black coated epoxy.
Sargent Part #624
G624 -
Sargent 28-0109 Center Case Cam for 2828 / 2838
Sargent 2828 / 2838 Center Case Cam
The Sargent 2828 / 2838 Center Case Cam is the Cam that the key cylinder actuates to open the door. The Cam is located in the middle of the Center Case. We can no longer get the retaining ring to hold it in place.
Sargent Part # 28-0109
G280109 -
Sargent 80 Series Lexan Touch Bar Kit 809
Sargent 80 Series Lexan Touch Pad Kit
Sargent 80 series Lexan Touch Pad Kit replaces old and or broken touch pad inserts. On the Sargent part break downs this would be Touch Bar part number 68-0607 and Base 68-0606. The base is 13-1/2" long with 3 mounting holes 4" apart on center.
Sargent Part # 809 KIT
G80500 -
Sargent 700 ET Spindle Kit 730-7
Sargent 700 ET Spindle Kit 730-7
This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors. Shank measures 4-1/4" long, square spindle is 5/16" square.
Sargent Part # 730-7
G7307 -
Sargent 700 ET Retrofit Kit 730-1
Sargent 700 ET Spindle Kit 730-7
This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors. Shank measures 4-1/4" long, square spindle is 5/16" square.
Sargent Part # 730-7
G7301 -
Sargent 2828 Series Rim Panic Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warrantyG20EO- -
-
Sargent Door Closer 1331
The Sargent Door Closer 1331 is a standard template closer with the 3/4” x 12” hole spacing. This closer is a great replacement for the Norton 8000 Series or Yale 3000 Series Door Closers. The closer is constructed of a cast aluminum body and has a heat treated steel pinion and rack. The 1331 has the ability to be mounted on the push, pull or top jamb, and is non handed. We stock the aluminum finish, but also have the dark bronze finish, it just might take an extra day or so. We ship the 1331-JUO.
1330- -
Sargent 97-2434 Old Style 8700 Top Latch
Sargent 97-2434 Old Style 8700 Top Latch
The Sargent 97-2434 Old Style Top Latch was used on the 8706, 8710, 8713, 8715, 8728, 8740, 8743, 8746, 8762, 8763, 8773, and 8774 Series Surface Vertical Rod Devices before November 11, 2002. We sometimes fine the casting number of 97-0317 stamped on the back of this latch. This Top Chassis has 3 mounting holes.
Sargent Part # 97-2434
G972434