Manufacturers| Von Duprin Exit Devices
-
Von Duprin 050390 Bottom Mullion Fitting
The Von Duprin 050390 Bottom Mullion Fitting is the Bottom Fitting for the 1654, 4754, 4854, and 4954 Von Duprin Mullions. The 050390 measures 5/8" thick by 2" wide and 3" long excluding the flange the projects out the one end. We find the number 961040-70 ESE cast right in the fitting. The mounting holes are 2-1/4" on center. Mounting Screws included.
Von Duprin Part # 050390
G050390- -
Von Duprin 4954 7' 6" Steel Mullion
The Von Duprin 4954 7' 6" Steel Mullion is the standard mullion used on most double doors with the Von Duprin Exit Devices. Mullions are easily removed by loosening bottom set screw and removing top fitting cover. The steel mullions are 2" wide and 3" deep, with an 1/8" thickness construction. We ship the 7'6" mullion, if you need the 8'6" or 10'6", please call. Package includes the 050390 and 050335 top and bottom brackets.
4954- -
Von Duprin 050130 Fitting Set for 5654 / 5754
The Von Duprin 050130 Fitting Set is for the 5654 / 5754 Mullions. Set includes top and bottom fittings, all of the mounting screws. The Fitting measures approximately 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-1/8".
Von Duprin Part # 050130
G050130- -
Von Duprin 050135 Top Fitting and Cover for 5654 / 5754
The Von Duprin 050135 Top Fitting and Cover is for use on there 5654 / 5754 Mullions. Package includes the Top Fitting and Cover, and all of the fasteners. The Fitting measures approximately 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-1/8"
Von Duprin Part # 050135
G050135- -
Von Duprin 050190 Bottom Fitting for the 5654 / 5754
The Von Duprin 050190 Bottom Fitting is for the 5654 / 5754 Mullions. The package includes the bottom fitting and all of the fasteners. The Fitting measures approximately 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-7/8"
Von Duprin part # 050190
G050190- -
Von Duprin 22, 33, And 99 Dogging Shaft 090040
The Von Duprin 22, 33, And 99 Dogging Shaft 090040 is the peice that the hex dogging key would fit into. The shaft is for a 5/32" dog key, but it has to be the long version. The shorter versions will not have enough reach to get all the way into the shaft. This is a very common problem area, the hole that the key fits in is only about 1/4" deep, and if you do not push down on the hex key when locking it open it will round out over time. To remove the shaft, just pull it straight out with a part of channel locks. We reinstalling the new one you might have to bend the ends of the adapter spring 090042 back down. This dogging shaft is for use on all Von Duprin Panic Exit Devices shipped after 1997.
G090040 -
Von Duprin Dogging Hook 090044
The Von Duprin Dogging Hook 090044 is the piece that grabs the push bar mechanism and keeps it in the dogged position. The does wear out, but it takes a long time. This piece is used on the 22, 33A, 35A, 98 and 99 series devices made after 1997. We sell this part individually and it is #5 on the diagram.
G090044 -
Von Duprin 2227/3327A/9927 Top Latch 050400
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050400
G050400 -
Von Duprin 2227/3327/9927 Bottom Latch 050401
Von Duprin 22, 33, 9927 Bottom latch.
Used to replace the bottom latch on the Von Duprin 2227, 3327A, and 9927 on devices shipped after October 1998.
Includes screws and sometimes the bracket
Von Duprin Part # 050401
G050401 -
Von Duprin 22 Mechanism End Cap 900981
The Von Duprin 22 Mechanism End Cap 900981 is the end cap and bracket that ships with the 22 and 2227 series. The bracket is constructed of zinc plated steel and the end cap is black plastic. Bracket also acts as mounting bracket that holds the exit device on the door. Von Duprin does offer a new Metal End Cap, look under related products.
Von Duprin part # 900981
G22R10 -
Von Duprin 22 End Cap Only 968601
The Von Duprin 22 End Cap Only 968601 is the end cap that goes on the hinge side of the door. When the cap breaks off the Dogging Cover Plate just slides off. Works on all of the Von Duprin 22 exit devices. If you need the bracket also, please order part # G22R10. Black plastic construction. As of October 1, 2014, Von Duprin no longer sells just the Plastic Cap Only. The complete End Cap and Bracket 900981 will be shipped in its place.
Von Duprin Part # 968601
G22R25 -
Von Duprin 22 Cover Plate 968595 968596
Von Duprin 22 Cover Plate 968595 968596
Von Duprin 22 Dogging Cover Plate. Plate covers the dogging assy, or hinge side of the exit device. This plate sides off when the plastic end cap breaks or goes missing.
Von Duprin Part # 968595 measures 10-3/4" Long for 3' devices
Von Duprin Part # 968596 measures 16-3/4" Long for 4' devicesG22R90- -
Von Duprin 2227 Bottom Latch 050090
The Von Duprin 2227 Bottom Latch 050090 replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120 -
Von Duprin 2227 Top Latch 050091
The Von Duprin 2227 Top Latch 050091 latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G22VR10 -
Von Duprin 2227 Rod Guides Assembly 112063
The Von Duprin 2227 Rod Guides Assembly 112063 works on all of the Von Duprin 2227's, and replaces the older style that featured the plastic cap and the springs. This device is used to add strength and rigidity to the top and bottom rods on there surface vertical rod.
Von Duprin part # 112063
G22VR80- -
Von Duprin 99 Mechanism End Cap 050014
The Von Duprin 99 Mechanism End Cap 050014, also known as 33A/35A/98/99/330/350 Impact Resistant End Cap Kit. Replaces all of the old versions of the 98/99 End Caps, the mounting holes may be different. Includes end cap, bracket and all screws
Von Duprin Part # 050014
G99R10- -
Von Duprin 99 Rim Center Case 050020
The Von Duprin 99 Rim Center Case 050020 replaces all previous versions of the Von Duprin 98/99 Rim Device Center Cases. One of the best things about a Von Duprin is when they redesign a part, they make it so your old device is not obsolete and you can update your device. All internal parts, springs, screws and cover mounting bracket included.
Von Duprin Part # 050020
G99R15