Search results for: 'LATCHES'
- Did you mean
- latch 0
- Related search terms
- LATCHES kits for bathroom doors 930
- latches+kick+for+bathroom+door 1049
- LATCHES+kits+for+bathroom+doors 1063
- latches+kit+for+bathroom+door 1049
- latches+kick+for+bathroom+doors 1049
- latches+kits+for+bathroom+door 1063
- LATCHES lock kits for bathroom doors 965
- LATCHES for panic doors 994
- latches lock kit for bathroom doors 965
- latches lock kit for bathroom door 965
-
Cal Royal GLS7700 Narrow Stile Rim Device
The Cal Royal GLS7700 Rim Device is for use on Aluminum Framed Glass Doors when the Stile width is 1-3/4 inch or more. The exit device ships with wood and machine screws, along with the Strike plate. The stainless steel latch bolt has a 3/4 inch throw. This device is a Grade 1, which is the heaviest duty rating.
GLS7700- -
Cal Royal Products 700 Series Door Closer
Cal Royal 700 Series Door Closer
Adjustable closing and latching speeds
holes spacing is 3/4" x8-3/16" for sizes 2 and 3, and 3/4 x 9-1/16" for the size 4. Size 2 is ideal for reduced power on interior doors, size 3 will be more powerful. Word of warning, the larger the spring size the harder it is to open the door.
Powder Coated Painted Finishes
5 year warranty720- -
Cal Royal Products 800 Door Closer
The Cal Royal Products 800 Door Closer is one of there newer closers. The CR801 has a hole spacing of 3/4" x 12" and ships with either a full cover or slim cover. The full cover will hide both spindles, were as the slim cover will not. This closer is a Grade 1 closer, the heaviest rating possible. The cylinder has adjustable spring tension, closing, latching and back check speeds. It can be mounted on the push, pull or top jamb. The CR801 will work in place of the Norton 8000 and Yale 3000 series door closers, with no new drilling.
CR801S - SLIM COVER
CR801 - FULL COVER
Ships within 24 hours from California.
CR800- -
Cal Royal Products CR441 Door Closer
The Cal Royal Products CR441 Door Closer is an inexpensive replacement for the LCN 4040. The mounting holes on the CR441 matches the 4040, at more than 1/2 the cost. This closer will work on the left or right, push, pull or top jamb for mounting. Just like the LCN 4040 it features adjustable spring tension, closing, latching and back check speeds. It is considered a Grade 1 closer, which is the heaviest rating possible.
CR4040- -
Cal Royal Panic Device 2000 Alarmed
Cal Royal 2000 Alarmed Exit Device
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.
Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.ALM2000 -
Cal Royal Products 400 Series Door Closer | Economical Door Closer
The Cal Royal Products 400 Series Door Closer is for lighter use interior doors. This closer is considered a Grade 2, which means it is only rated for 1,000,000 cycles. The 400 Series is a sized closer, meaning you can not adjust the spring tension, the spring size you select is what you get. Also, make sure to note the hole spacing of the various sizes below. These closers also offer adjustable closing and latching speeds.
Size 420 3/4" x 6-5/8" hole spacing
Size SM 430P 3/4" x 6-1/2" hole spacing
Size 430P 3/4" x 8-3/16" hole spacing
Size 440P 3/4" x 8-3/16" hole spacingCal Royal 400 Series Catalogue
400P -
Cal Royal Products 900 Series Door Closer
The Cal Royal Products 900 Series Door Closer is a unique one, it is the only closer that has the 3/4" x 11-1/8" hole spacing. We have seen a few versions of this closer, some have 6 mounting holes, and some have 4. If your closer has a spacing of 11-1/8", and has 3 holes on each size, this is the only closer I know of that is like that. The 900 Series is a Grade 1 closer, the heaviest duty rating possible. The door closer has adjustable spring tension, closing, latching and back check valves and is Barrier Free rated. The package comes with all of the mounting screws and a parallel arm bracket, so it can be mounted on the left, right, push, pull or top jamb for mounting.
900P-