Search results for: 'FIRE DOORS'
-
Cal Royal Panic Device 2000 Series Lever Trim
Cal Royal 2000 Series Exit Device Lever Trim
Non-handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For
1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
thickness. Available for fire and non fire rated rim and
vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”.ENTOOL- -
Cal Royal Panic Device 7700 Rim Device
Cal Royal 7700 Rim Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.
Templating matches the Von Dupin 99 and 98
CR7700EO- -
Cal Royal Panic Device 7760 Surface Vertical Rod
Cal Royal 7760 Surface Vertical Rod Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware.
Templating matches the Von Dupin 99 and 98
CR7760EO -
Cal Royal Products 700 Series Door Closer
Cal Royal 700 Series Door Closer
Adjustable closing and latching speeds
holes spacing is 3/4" x8-3/16" for sizes 2 and 3, and 3/4 x 9-1/16" for the size 4. Size 2 is ideal for reduced power on interior doors, size 3 will be more powerful. Word of warning, the larger the spring size the harder it is to open the door.
Powder Coated Painted Finishes
5 year warranty720- -
Cal Royal Products CR441 Door Closer
The Cal Royal Products CR441 Door Closer is an inexpensive replacement for the LCN 4040. The mounting holes on the CR441 matches the 4040, at more than 1/2 the cost. This closer will work on the left or right, push, pull or top jamb for mounting. Just like the LCN 4040 it features adjustable spring tension, closing, latching and back check speeds. It is considered a Grade 1 closer, which is the heaviest rating possible.
CR4040- -
Cal Royal Products 900 Series Door Closer
The Cal Royal Products 900 Series Door Closer is a unique one, it is the only closer that has the 3/4" x 11-1/8" hole spacing. We have seen a few versions of this closer, some have 6 mounting holes, and some have 4. If your closer has a spacing of 11-1/8", and has 3 holes on each size, this is the only closer I know of that is like that. The 900 Series is a Grade 1 closer, the heaviest duty rating possible. The door closer has adjustable spring tension, closing, latching and back check valves and is Barrier Free rated. The package comes with all of the mounting screws and a parallel arm bracket, so it can be mounted on the left, right, push, pull or top jamb for mounting.
900P- -
Cal Royal Products 400 Series Door Closer | Economical Door Closer
The Cal Royal Products 400 Series Door Closer is for lighter use interior doors. This closer is considered a Grade 2, which means it is only rated for 1,000,000 cycles. The 400 Series is a sized closer, meaning you can not adjust the spring tension, the spring size you select is what you get. Also, make sure to note the hole spacing of the various sizes below. These closers also offer adjustable closing and latching speeds.
Size 420 3/4" x 6-5/8" hole spacing
Size SM 430P 3/4" x 6-1/2" hole spacing
Size 430P 3/4" x 8-3/16" hole spacing
Size 440P 3/4" x 8-3/16" hole spacingCal Royal 400 Series Catalogue
400P -
Cal Royal Products 300 Series Door Closer | 300-PCOV
The Cal Royal Products 300 Series Door Closer comes in two versions. One version is the size 3 to 6 spring, which would be for larger exterior doors. The 3 to 6 spring size is for doors 36" to 48" wide. The second version is the size 1 to 4 spring size. The 1 to 4 is considered a Barrier Free door closer, because the spring tension can be turned down to less than 8 pounds of resistance, making the door easy to open. The 1 to 4 should be used on interior doors and smaller, less than 36" wide exterior doors. This door closer is a standard template closer with a hole spacing of 3/4" x 9-1/16" center to center, which is what we find on many aluminum framed glass storefront doors. This closer has a 5 year warranty and is considered a Grade 1 closer, the heaviest duty rating possible.
300P- -
Cal Royal Products 800 Door Closer
The Cal Royal Products 800 Door Closer is one of there newer closers. The CR801 has a hole spacing of 3/4" x 12" and ships with either a full cover or slim cover. The full cover will hide both spindles, were as the slim cover will not. This closer is a Grade 1 closer, the heaviest rating possible. The cylinder has adjustable spring tension, closing, latching and back check speeds. It can be mounted on the push, pull or top jamb. The CR801 will work in place of the Norton 8000 and Yale 3000 series door closers, with no new drilling.
CR801S - SLIM COVER
CR801 - FULL COVER
Ships within 24 hours from California.
CR800- -
Cal Royal 6600 Rim Device
The Cal-Royal 6600 Rim Device is a Grade 1 exit device. It is designed for doors that have at least a 4-1/2 inch stile width. The 36 inch device has a 32 inch actual length and can cut down 6" (24 inch actual). The 48 inch device has an actual length of 44 inches and can be cut down 12 inch (34 inch actual). Devices ships with 938 Strike and all the mounting screws.
CR6600- -
Cal-Royal 45 Narrow Stile Rim Device
The Cal-Royal 45 Narrow Stile Rim Device is part of the new 4500 Series. They are designed for Narrow Stile doors with a minimum of an 1-3/4" stile width. This is a Grade 1 Exit Device, which is the highest traffic rating possible. Exit device ships with strike and mounting screws.
Shown is Left Hand Reverse
Opposite would be Right Hand Reverse45-RIM -
Cal-Royal 45 Narrow Stile Surface Vertical Rod
The Cal-Royal 45 Narrow Stile Surface Vertical Rod is part of the new 4500 Series. They are designed for Narrow Stile Doors with a Stile width of at least 1-3/4 inches. The device is rated as a Grade 1, which is the heaviest traffic rating possible. They ship with all mounting hardware and strikes. This device is non handed and uses a Allen Type dogging system.
45-SVR -
Cal Royal CRCODE204 Mechanical Lever Lock for 2200, 7700 and 9800 Exits
The Cal-Royal CRCODE204 is for use with the 2200, 7700 and 9800 Rim and Surface Vertical Rod Devices. The Lever Mechanism features a Break Away Lever, for use with 1-3/4 inch to 2 inch thick doors, non-handed, Single Code User, Key Override, easy on the door code change, weather resistant, and more than 8000 non-sequential possible code combinations.
CRCODE204- -
Cal-Royal 9800 Rim Device
The Cal-Royal 9800 Rim Device is a grade 1 Heavy Duty Exit Device. The 9800 has the same template as the 8800 and 9800 with escutcheon lever trim. The 36 inch device will be 32 inches wide and can be cut down an additional 2" to fit doors as narrow as 30 inches. The 48 inch will be 44 inches wide and can be cut down to fit doors 36 inches wide. The device is non handed, meaning it will work on a left hand reverse or right hand reverse door. Strike and mounting screws are included.
9800EO- -
Cal Royal GLS7700 Narrow Stile Rim Device
The Cal Royal GLS7700 Rim Device is for use on Aluminum Framed Glass Doors when the Stile width is 1-3/4 inch or more. The exit device ships with wood and machine screws, along with the Strike plate. The stainless steel latch bolt has a 3/4 inch throw. This device is a Grade 1, which is the heaviest duty rating.
GLS7700- -
Cal Royal 6660 Surface Vertical Road
The Cal-Royal 6660 Surface Vertical Rod Device is a Grade 1 exit device. It is designed for doors that have at least a 3-3/4 inch stile width. The 36 inch device has a 32 inch actual length and can cut down 6" (24 inch actual). The 48 inch device has an actual length of 44 inches and can be cut down 12 inch (34 inch actual). Devices ships with 938 Strike and all the mounting screws.
6660EO -
Cal Royal Panic Device 7000 Alarmed
Cal Royal 7000 Alarmed Exit Device
Same as the Cal Royal 7700, but with these added features"
Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. The key switch to turn alarm off is a standard 1 ¼” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors push rail only. Unit includes “EMERGENCY EXIT ONLY • ALARM WILL SOUND” decal for application on door or unit.
ALRM7700 -
Cal Royal Panic Device 2000 Alarmed
Cal Royal 2000 Alarmed Exit Device
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.
Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.ALM2000