Search results for: 'door series push bar panic exit dor cal parts'
-
Dor-o-Matic 1690/1790/2390 Dogging Spring PB323
Dor-o-Matic 1690, 1790 and 2390 Dogging Spring
Doromatic part # 971493-76 or PB323
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPB323 -
Dor-o-Matic 1690/1790 Screw PB345
Dor-o-Matic 1690/1790 Lock Stile Screw
Doromatic part # SCREW.1077 or PB345
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB345 -
Falcon 2390 231CA Cylinder Kit
The Dor-O-Matic 2390 231CA Cylinder Kit converts your 2390 exit only to a Night Latch or Hold Back function key lock. All the hardware is included in the package to convert your device, except for the Mortise Cylinder. Housing measures 4-1/2" tall by 1-11/16" wide with a 1-1/8" projection. We send the 231CA which includes the Schlage B502-191 Cam. The 239CA is the same kit, but without the Schlage Cam.
Discontinued item, we only have a few left in Dark Bronze.
231CA- -
Dor-o-Matic 1990/2090 Arm Bearing SD43
Dor-o-Matic 1990 and 2090 arm bushing. This bushing goes between the pivot pin (arm axle) and housing.
Doromatic part # BUSH.103 or PB43
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199043 -
Dor-o-Matic 1990/2090 "E" Ring PB4
Dor-o-matic 1990/2090 Pivot Pin E Ring. This ring is used on the Pivot Pin G199013.
7/16" diameter
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199044 -
Dor-o-Matic 1690 Retainer Screw PB141
Dor-o-Matic 1690 Retainer Screw.
Doromatic part # SCREW.1074 or PB141
Dor-o-Matic 1690 Repair Parts Breakdown
GPB141 -
Dor-o-Matic 1990/2090 "E" Ring RRing.109
The Dor-o-Matic 1990/2090 "E" Ring RRing.109 is use to connect the concealed rods to the Traveller Assembly (G199028, PB88, or 4270100013). The rods fit through the traveller and rod bushings, and the Retaining Ring holds them in place. This piece has a diameter of 1/2". This item is now under the Falcon name plate.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199004 -
Dor-o-Matic 1490 149CA-NL Cylinder Assembly
No longer manufactured. We do have some of the PB115, which is the die cast disc that has the receiver for the rim cylinder and the plastic nub.
Dor-O-Matic 1490 Cylinder Assembly 149CA-NL
Doromatic part # 149CA-NL or 4270107272
149CA-NL -
Dor-o-Matic 1790 Channel Spacer PB326
Dor-o-Matic 1790 Channel Spacer. This part is used on Dor-o-Matic 1790's with an outside key cylinder.
Doromatic part # SPACER.107 or PB326
Dor-o-Matic 1790 Repair Parts Breakdown
GPB326 -
Dor-o-Matic 1690/1790 End Cap Bracket Screw PB315
Dor-o-matic Falcon 1690 and 1790 End Cap Bracket Screw. This screws holds the bracket that holds the end cap.
Doromatic part # SCREW.1070 or PB315
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB315 -
Dor-o-Matic 1990/2090 Pin Spring RD10
Dor-o-Matic 990/1990/2090 Lever Arm Pin. This pin is what the spring attaches to.
Doromatic part # PIN.104
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199011 -
Dor-o-Matic 1690/1990 Rod Bearing PB3
Dor-o-Matic Rod Bearing. This is the piece that goes over the rod and fits into the traveller to take up slack.
Doromatic part # BUSH.109 or PB3
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199003 -
Dor-o-Matic 1690 Hex Soc Set Screw PB317
Dor-o-Matic 1690 Hex Socket Set Screw-PB317
1/4-20 x 3/8"
Doromatic part # SCREW.1067 or PB317
Dor-o-Matic 1690 Repair Parts Breakdown
GPB317 -
Doromatic TD35 Roller Strike
The Falcon TD35 Roller Strike is used with the Dor-o-Matic Falcon 1590, 1790, and 2090 panic device where you are trying to protect the frame when the door closes. The strike has been manufactured since the 1970's. This part is also known as a Kawneer 133479 strike. The strike ships with mounting screws in a painted black finish. This style of strike is also known as a Blade Strike.
Doromatic Falcon Part # TD35 or 4270107393
GTD35 -
Dor-o-Matic 1690 Actuator Arm Brkt Assembly PB338
The Dor-o-Matic Falcon Actuator Arm Bracket Assembly is used on the 1690 and 2390 devices.
Doromatic part # BRKTASY.107 or PB338
Dor-o-Matic 1690 Repair Parts Breakdown
GPB338 -
Dor-o-Matic 1690 Lock Stile Screw PB114
Dor-o-matic 1690 Lock Stile Screw
1/4-20 Phillips Head Screw, a liite less than 1/2" overall lenght.
Doromatic part # SCREW.1069 or PB114
Dor-o-Matic 1690 Repair Parts Breakdown
GPB114 -
Dor-o-Matic 1790 NL/HB Cylinder Assembly Slider PB344
Dor-o-Matic 1790 Slider. This is one on the components used in the NL/HB Cylinder Assy
Doromatic part # SLIDER.101 or PB344
Dor-o-Matic 1790 Repair Parts Breakdown
GPB344 -
Dor-o-Matic 1990 and 2090 Set Screw PB38
The Dor-o-Matic 1990 and 2090 Set Screw PB38. This set screw goes in the housing to secure it on the mounting studs. There is 3 of these screws on each housing, two on the left and right side toward the top, and one on the bottom. The manufacture is now Falcon.
Doromatic part # SCREW.1039 PB38
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199038 -
Dor-o-matic 1790 NL/HB Cylinder Assembly 179CA
Dor-o-Matic 1790 NL/HB Cylinder Assembly. Converts a 1790EO to the Night Latch or Hold Back function
Doromatic Part # CYLASY.1151 or 179CA
GCA7 -
Dor-o-Matic 2090 Backplate Assembly PB89
The Dor-o-Matic 2090 Backplate Assembly PB89 has been around since the early 1970's. It is now called the Falcon 2090 Back Plate Sub Assembly, but it is the same thing, just different owners of the company. This piece includes the plate casting, latch bolt, pinion gear, and retractor.
Doromatic Part # 4270902974 Right Hand
Doromatic Part # 4270902968 Left HandLEFT HAND BACKPLATE SHOWN
G209090 -
Dor-o-Matic 1590 NL Cam Assembly PB117
Dor-o-Matic 1590 NL Cam Assembly
Doromatic part # 4270107283
No longer Manufactured
GPB117 -
Falcon / Doromatic Door Closer SC81
The Falcon / Doromatic Door Closer SC81 is an affordable, higher quality, standard template closer. This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension. It has the ability to be mounted on the push, pull or top jamb and is non handed. This closer is considered a Grade 1 closer, which is the highest grade you can get. The hole spacing is 3/4” x 12”, which is the same hole spacing as the Norton 8301, 8501 and the Yale 3301, 3501 Door Closers. We ship the SC81 Rw/PA.
SC80-