Search results for: 'exit door panic devices square screw parts'
-
LCN Door Closer 4111
The LCN Door Closer 4111 is known as the Smoothee, and is one of the heaviest duty door closers made. If you have a building were you have a high traffic and abusive, especially exterior doors, then this is the closer. The 4111 is an application specific closer, meaning it will only work when mounted on the door, on the push side. This is known as a parallel arm application. The cylinder is fully adjustable and will work on doors up to 56" exterior door, and can be adjust down to ADA required levels. We ship the 4111 EDA model, which is a non hold open arm, on this page. The cylinder mounting holes are 2-1/2" by 6".
4110 -
LCN Door Closer 62PA Parallel Arm Shoe
The LCN Door Closer 62PA Parallel Arm Shoe is constructed of steel and then powder coated to your color. This is the shoe that LCN used on there universal door closers for the parallel arm mounted door closers. This is the bracket that is shipped with the Rw/PA and Hw/PA arms. A parallel arm closer is a door closer that has the arm parallel to the door when the door is closed. This part is also known as the 1260-62PA, 1460-62PA, 4030-62PA, and 4040-62PA. Ships with mounting screws.
62PA -
Continuous Full Mortise Hinge
The Ives 112HD Continuous Full Mortise Hinge Geared Hinge measures 83" long and is constructed of extruded aluminum. This hinge is non handed, and will work on doors up to 48" wide and 450 pounds. You can easily cut this hinge in the field if your door is less than 83" high.
GFM100- -
Von Duprin 22 End Cap Only 968601
The Von Duprin 22 End Cap Only 968601 is the end cap that goes on the hinge side of the door. When the cap breaks off the Dogging Cover Plate just slides off. Works on all of the Von Duprin 22 exit devices. If you need the bracket also, please order part # G22R10. Black plastic construction. As of October 1, 2014, Von Duprin no longer sells just the Plastic Cap Only. The complete End Cap and Bracket 900981 will be shipped in its place.
Von Duprin Part # 968601
G22R25 -
LCN Door Closer Rod And Shoe
The LCN 79 Door Closer Rod And Shoe piece fits into the female part of all LCN Regular Arms. The old style had two concave set screws and a ball pressed into the rod. If the door over rotated the ball would pull out of the concave set screws. The new version has a pin holding the rod to the shoe which is designed to fail if the door is over rotated. This piece will work on the LCN 1260, 1460, 4010, 4020, 4030 and 4040 door closers with regular arms. Some of the really old models have multiple threaded holes, so you might have to drill a hole in the female tube. Part #'s 4040-79, 4040-79LR and 4040-79ELR. The 1260, 1460, 4010, or 4020 could replace the 4040 in those part numbers, they are the same.
79 -
LCN Door Closer 4040SE Track Assy 4040SE-3038
The LCN Door Closer 4040SE Track Assy 4040SE-3038 replaces all Sentronic tracks for the 3130SE, 4010SE, 4110SE and 4040SE Closers. Track includes the roller, 4040SE-3034 and new mounting screws. The replacement track measures 21-3/4" on center for the mounting screws, which may be different then the 3130SE, 4010SE, 4110SE and older 4040SE Tracks. The replacement track is the only way we know of to replace the solenoid. Specify voltage, and color when ordering.
LCN Part # 4040SE-3038
4040SE-3038 -
Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX
The Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX has been around since the early 1970's. Although it is now called a Falcon 1990, it is still the same device. This housing is also the inactive housing on the Dor-O-Matic / Falcon 1090 and 2090 panic hardware. The housing includes all of the interior springs, arm, and dogging screw. Housing measures 7-1/2" long by 1-3/16" wide. The center to center distance of the mounting studs is 6-1/4".
LEFT HAND SHOWN IN PICTURE
See diagrams for handing.
Doromatic part #
4270902784 - right hand dark brown
4270902782 - right hand aluminum
4270902785 -right hand black
4270902778- left hand dark brown
4270902776 - left hand aluminum
4270902779- left hand blackG199001 -
Sargent 700 ET Retrofit Kit 730-1
Sargent 700 ET Spindle Kit 730-7
This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors. Shank measures 4-1/4" long, square spindle is 5/16" square.
Sargent Part # 730-7
G7301 -
Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130
The Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130 is also used on the 1390, 1490 and 2390. This latch has been around since the 1970's, and is usually the issue if your bottom rod is dragging on the floor. Although we are calling it Dor-o-Matic, it is actually known as a Falcon SU Top Latch due to a name change 5 or 6 years ago. This latch rolls over when the device is pressed in and then locks in that position. When the door closes, the 'U" channel of the latch flips over to a vertical postion and drops the rods. This latch always uses the PB48 Strike, our part # G199034. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB130 or 4270101806.
G199025 -
Von Duprin Strike 299F
The Von Duprin Strike 299F is used on the 22, 88, 98, and 99 Fire Rated Rim Devices (no hex or cylinder dogging). The 299F strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". The non fire rated version would be the Von Duprin Strike 299. Ships with shim and mounting screws.
Von Duprin Part # 299F
299F -
Von Duprin 2227 Bottom Latch 050090
The Von Duprin 2227 Bottom Latch 050090 replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120 -
LCN Door Closer 2031 -2035
The concealed LCN Door Closer 2031 -2035 Pacer® is a heavy duty closer designed to fit in a narrow, minimum 1 3/4” aluminum transom. It is considered an application specific closer, due to the cylinder spring sizing and handing. The standard 2030 series closer shipped with standard arm, standard track, mounting/finish plate, and wood and machine screw pack. Aluminum frame requires minimum 1 3/4” x 4” tube.
2030 -
Von Duprin 88 Active Case 050409
The Von Duprin 88 Active Case 050409 is for use with the Rim Device, which is the model that has the latch bolt sticking out the side of the housing. This version of the housing is for use on the 88EO (Exit Only), 88DT (Dummy Trim) and 88NL (Night Latch) models only. Call or email if you need the Thumb Piece, Knob or Lever Version. The Center Case includes all of the internal workings.
Von Duprin Part # 050409
Old Part # 10166288R10- -
Von Duprin Strike 1609
The Von Duprin Strike 1609 strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the Von Duprin 22/2227, 88/8827, 98/9827 and 99/9927 combinations. The strike base measures 1-1/16" wide by 3-1/4" high, the lip projects out 7/8". The three slots are 1-1/4" on center. This strike ships with the mounting screws. This Strike is not rated for Fire Doors, which are usually interior corridor doors.
Von Duprin Part # US19-Black finish
1609 -
Von Duprin 99 Cover Plate 050114
The Von Duprin 99 Cover Plate 050114 is for use on the 33A, 35A, 98 and 99 devices. Covers the dogging assembly on the hinge side of the door. The usually fall off when the End Cap is not on the exit device. Von Duprin is only shipping a 20-1/2" cover plate now, which will work on 3' and 4' doors, you will have to cut more off if you have a 3' device with a hack saw or chop saw.
Von Duprin Part # 050114 and 050117 Hex Key Dog Conversion Kit
Von Duprin 99 Cover Plate 050114
G99R50 -
LCN Door Closer 4031
The LCN Door Closer 4031 is shipped with forged regular arm, metal cover and wood/self-tapping machine screw pack. Non-sized (1-4) 4031 cylinder for exterior doors to 36” (914 mm) and interior doors to 48” (1219 mm). Closer mounts hinge side, top jamb, and parallel arm, on either right or left swinging doors. Closer meets ADA requirements. The hole spacing on this closer will not match the 4030's that LCN produced up to 1997, that was a completely different door closer.
We ship the 4031 Rw/PA
4030- -
Falcon 299 Strike
Falcon 299 Strike
The Falcon 299 Strike is used on the 25-R and 24-R Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". This strike is the same as the Von Duprin 299 Strike.
Ships with shim and mounting screws
Falcon Part # 299
Fa299 -
Von Duprin 22 Mechanism End Cap 900981
The Von Duprin 22 Mechanism End Cap 900981 is the end cap and bracket that ships with the 22 and 2227 series. The bracket is constructed of zinc plated steel and the end cap is black plastic. Bracket also acts as mounting bracket that holds the exit device on the door. Von Duprin does offer a new Metal End Cap, look under related products.
Von Duprin part # 900981
G22R10 -
Corbin Russwin 681F608 ED5200S Latch Assembly
Corbin Russwin ED5200S Latch Assembly
The Corbin Russwin ED5200S 681F608 Latch Assembly is used on the Wider Stile SecureBolt Exit Device. The difference between the ED5200S and ED4200S Latch Assembly is the location of the Hub. Hub on the ED5200S Latch Assembly is located off the center line of the Assembly Mounting Screws.
Corbin Russwin Part # 681F608
The Hub Position for this Latch is the ED5200
G681F608
