Search results for: '1500 falcon exit door flush mount 2390'
-
Anodized Aluminum Door Kick Plate
Anodized Aluminum Door Kick Plates are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050″ thick and have a brushed or satin finish. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.21 per square inch depending quantity
Please allow 1 week shipping time
GKP-al -
Door Pull Handle 10
The Door Pull Handle 10 has 5-1/2" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 6-1/4". The projection is 2" and the clearance is 1-1/2". Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.
GHE10- -
Wall Door Stop / Bumper Convex WS407-CVX
The Ives Wall Bumper Stop WS407-CVX our economically price convex wall bumper. The metal ring is a wrought stainless steel, otherwise known as stamping. It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time. Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten. The bumper is 2-1/2" in diameter and projects out 1".
GJ50W- -
LCN 4040SE-3077T Sentronic Door Closer Arm
The LCN 4040SE-3077T Sentronic Door Closer Arm is only for use with the 4040SE. If you have another LCN Sentronic Model, we can special order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door.
LCN Part # 4040SE-3077T
4040SE-3077T- -
Offset 60 Degree Door Pull 36-1 inch diameter
The Offset 60 degree Door Pull is available in 8, 10 and 12 inch centers. The handle is constructed of 1 inch solid material, with the base metal determined by the finish (color). It features 1-1/8 clearance, 2-1/8 projection and has a 2 inch offset. The fasteners are 5/16-18 thru bolts with a finish washer. Please specify the door thickness when ordering.
GHE36- -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050
The Brushed Stainless Steel Door Kick Plate 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there. We use type 304 stainless
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.23 per square inch depending quantity
Please allow 1 week shipping time
GKP-ss-16 -
Dor-o-Matic 2090 Backplate Assembly PB89
The Dor-o-Matic 2090 Backplate Assembly PB89 has been around since the early 1970's. It is now called the Falcon 2090 Back Plate Sub Assembly, but it is the same thing, just different owners of the company. This piece includes the plate casting, latch bolt, pinion gear, and retractor.
Doromatic Part # 4270902974 Right Hand
Doromatic Part # 4270902968 Left HandLEFT HAND BACKPLATE SHOWN
G209090 -
Rixson Checkmate Overhead Door Holder 9 Series
Rixson Checkmate Overhead Door Holder 9 Series
Product Description & Features
• Doors are single acting
• Non-handed
• Slide track design
• Recommended for high traffic, heavy
abuse installations
• Heavy shock absorber spring provides
5-7° compression before deadstopSize is the Door Width
GR09 -
Door Pull Handle 16
The Door Pull Handle 16 has an overall length of 7-1/2". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.
GHE16- -
Door Silencers For Wood Doors
Door Silencers For Wood Doors
For use on Wood Doors. Insert into 1/4" hole in door frame.
Height: 3/4"
Diameter: 3/8"
Thickness: 1/8"GJ65 -
Von Duprin 99 Cover Plate 050114
The Von Duprin 99 Cover Plate 050114 is for use on the 33A, 35A, 98 and 99 devices. Covers the dogging assembly on the hinge side of the door. The usually fall off when the End Cap is not on the exit device. Von Duprin is only shipping a 20-1/2" cover plate now, which will work on 3' and 4' doors, you will have to cut more off if you have a 3' device with a hack saw or chop saw.
Von Duprin Part # 050114 and 050117 Hex Key Dog Conversion Kit
Von Duprin 99 Cover Plate 050114
G99R50 -
Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102
The Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102 fits around the Pinion gear to take up slack and reduce friction. This piece is now known as the Falcon Panic Hardware BUSH.102, but for many years was called the Dor-o-Matic PB46.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownG199046 -
Cal Royal CRCODE101 Mechanical Lever Trim for 7700 and 9800 Exits
The Heavy Duty Cal Royal CRCODE101 is for use on the 7700 and 9800 Rim and Surface Vertical Rods. This lock features Single Code with up to 8000 code combinations, weather resistant, non handed, and code can be changed without removing the lock. Comes in Brushed Chrome finish only.
CRCODE101 -
Lifetime Brushed Brass Door Kick Plate
The Lifetime Brushed Brass Door Kick Plates are the same as the Lifetime Polished Brass Door Kick Plates, solid stainless steel base metal, 16 gauge (.050" thick), but the surface is Satin or Brushed. Because it is an artifical finish they will not tarnish. Custom sizes available starting around $0.41 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP-BB -
Adams Rite 8600 Electric Latch Retraction Concealed Vertical Rod
The Adams Rite 8600EL Electric latch Retraction Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors. The device will fit on stile widths of 2" or more. The EL version We recommend this device for replacement or upgrading your current 8600 to Latch Retraction, modifying your existing door to this exit device will be labor intensive. The 8611EL would be for the aluminum finish and the 8622EL would be or the dark bronze finish.
This device is Electrified, please see the 8600 for the non Electric Device.
8600EL -
Dor-O-Matic 1690/1790/1990/2090 Pinion PB5
The Dor-O-Matic 1690/1790/1990/2090 Pinion PB5 has been in use since the 1970's. This gear or pinion is what activates the latch or the rods on the 990, 1090, 1690, 1790, 1990 and 2090 devices. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are the same device, with the same parts, just a different name plate. The manufacture part number on this is CAM.102, PB5 or PB140.
G199005 -
Von Duprin 22 End Cap Only 968601
The Von Duprin 22 End Cap Only 968601 is the end cap that goes on the hinge side of the door. When the cap breaks off the Dogging Cover Plate just slides off. Works on all of the Von Duprin 22 exit devices. If you need the bracket also, please order part # G22R10. Black plastic construction. As of October 1, 2014, Von Duprin no longer sells just the Plastic Cap Only. The complete End Cap and Bracket 900981 will be shipped in its place.
Von Duprin Part # 968601
G22R25 -
Hager 5200 Series Door Closer
Hager 5200 Series Door Closer
Hager 5200 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control. The 5200 Series door closer is easy to install and maintain keeping your building safe and secure.
The Hager 5200 Door Closer body has a hole spacing of 3/4" x 12"
5200- -
Dorma 8916 Door Closer
Dorma 8916 Door Closer
The Dorma 8916 door closer series designed to provide a highly flexible door control system suitable for institutional or high-traffic commercial applications. Its hydraulic control system features a full range spring power adjustment and back check, along with a narrow projection full cover and flatform style arm.
Door closer certified for ANSI Grade 1.
we ship the Dorma Model # 8916-AF89P
2-1/8" x 5" hole spacing
8916- -
Command Access MLRK1-JAC12 Motorized Latch Retraction for Jackson CRL 1200
The Command Access MLRK1-JAC12 Motorized Latch Retraction Kit With REX is for use on the Jackson CRL 1285 and 1295 Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires. The package includes: 1) Motor Mount with MM5; (1) 50944 Molex Pigtail; (1) 50030 6 Feet Lead with VD Connector; (2) 40124 10-24 x 3/8inch Phillips Screws (Silver); (2) 40125 10-24 x 3/8inch Phillips Screws (Black).
The MLRK1-JAC12 is a cost-effective and straightforward way to upgrade your Jackson 12, Kawneer 16/17 and PD16 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty.
MLRK1-JAC12 -
Push Bar W/Offset Grip PP-2000
The Push Bar W/Offset Grip PP-2000 is what we usually find on most aluminum framed glass store front doors. This particular set can usually ship within 24 hours, and comes in grip sizes of 9", 10" and 12" centers. The push bar has 33-1/16" centers. It is constructed of 1" solid aluminum that is anodize clear (aluminum) or dark brown. It ships with all of the hardware needed for an 1-3/4" thick door. At this time we are not able to sell the fasteners separately.
PP-2000 -
Finger Protector For Doors - Exterior Pull Side
Door Finger Protector - Exterior Pull Side
This model is specifically designed for exterior doors on the pull side of the door. This patented Finger-Gard product is designed for both exterior and interior doors and thus will operator in very cold and very hot tempetures. Flexible to minus 40 degrees. They are made of a special rubber that is resistant to harsh sunlight. They will allow the door to swing up to 180 degrees. This product is available in Brown or White, 78" or 83" lenghts
Our part # on this is GFG7 for the 78" length, and GFG7+ for the 83" length.
GFG-D -
Push Bar Adjustable 450
Push Bar Adjustable 450
Finishes:
US3/605 Polished brass
US4/606 Brushed brass
US10B/613 Dark bronze
US26/625 polished chrome
US26D/626 brushed chromeMaterial: Brass
Material Size: 5/8" Rd Tube Adjustable up to 36"
Clearance: 1/2"
Projection: 1-1/8"
Fasteners: Surface Mount only
450- -
Door Push Plate 62
The Door Push Plate 62 is constructed of 16 guage (.050") thick aluminum, stainless steel, brass or bronze depending on your finish. They measure 7-1/2" by 15" tall. This plate is handed left and right, the one shown on the website is a Left Hand. Plate comes with matching finish mounting screws.
GPH62-







































