Search results for: '1940 falcon exit door flush mount'
-
Corbin Russwin 650F35-8 ED5200 Active Head
Corbin Russwin ED5200 Active Head
Used on the Corbin Russwin ED5000 Rim Devices, for non fire rated doors. For fire rated doors, order the G650F36-8. A non fire rated door is a door were you can use your allen wrench to dog, or lock, the door in the open position during business hours.
Corbin Russwin part # 650F35-8
Rim Cylinder Hub Position for the ED5200
G650F35-8 -
Von Duprin 100316 5547 Top Plate
The Von Duprin 100316 is used on the 5547 on the top of the door. The top rod goes through the square hole on the plate. The plate shown in the Picture has both sides or LHR and RHR doors. One side of the strike is usually broken off depending on the hand of the door.
G100316 -
Corbin Russwin 650F37-8 ED4200 Active Head
Corbin Russwin ED4200 Active Head
Used on the Corbin Russwin ED4000 Rim Devices, for non fire rated doors. A non fire rated door is a door were you can use your allen wrench to dog, or lock, the door in the open position during business hours.
Corbin Russwin part # 650F37-8
The Hub Position for the ED4200
G650F37 -
Push Plate 80 Series 1/8 inch Round Bevel
The 80 Series Push Plate is similar to the 70 series, but has a round bevel on the top and bottom of the plate. There is no bevel on the sides. These plates are an 1/8 inch thick and are available many different finishes and size. Custom sizes are available, and they ship with the matching finish mounting screws.
GPH80- -
Rixson 117 Hinge Set
Application
includes 180 top pivot
Interior Doors
Weight to 300 lbs.*
Door Width up to 3'6"(1067mm)
Handed117 -
Push Bar w/Handle 422X26
The Push Bar w/Handle 422X26 is usually found aluminum framed glass store front doors. It is constructed of 1" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish. The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing. The push bar center to center length is determined by you, we can do any reasonable size. Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door. All the fasteners are included, and are determined by the material your door is made of (wood or metal). Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.
422x26 -
Yale 7100F Series Latch Assy 60-7000-0425-048
Yale 7100F Series Latch Assembly
This Yale Latch Assembly is used on fire rated panic devices. A fire rated panic is a device were you can not lock the latch in the open position. It is used on doors were the engineers want the door to latch every time it closes to contain a fire.
Yale Part # 60-7000-0425-048
Note the Hub Position of this latch is the 7100
G6070000425048 -
Roller Bumper Offset RB470
The Ives Roller Bumper Offset RB470 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 5" and the base has a 1-11/16" x 2-1/4". The device was just like the Glynn-Johnson RB3 or GJRB3.
GJRB3- -
Full Mortise Regular Weight Hinge
The Full Mortise Regular Weight Hinge are for lighter weight interior doors without a door closer. They are constructed of 10 gauge (.134”) steel that is then plated or paint primed. We sell them in boxes of 3 hinges, and they ship with machine and wood screws.
Shown in brushed brass
G100XX -
Von Duprin 050814 Solenoid Kit for E996
The Von Duprin 050671 and 050814 solenoid have been discontinued. All of our stock is gone. Von Duprin has come out with a retrofit kit to update your E996 Lever to the M996 Lever. The kit changes out the solenoid for a mortorized version, more robust and uses less current. The newer version can be found by searching for M996.
This solenoid is used on the E996 Electrified Lever Trim. The Solenoid body measures 1-3/8” x 9/16” diameter, mounting bracket has a 3/4” on center hole spacing. The wiring harness has a two wire plug. We some times fine the number 991342 on the solenoid.
New for 2024 Von Duprin has come up with a Mechanical Electrified Conversion kit. This kit converts the EL Solenoid to a Mechanical Electrified Trim. More information can be found @ https://www.robertbrooke.com/von-duprin-m996l-retrofit-kit.html
Von Duprin Part # 050814
Von Duprin Part # 050671G050814 -
Full Mortise Spring Hinge
The Full Mortise Spring Hinge is found in many hotels and motels across the United States. They are an inexpensive way to meet Fire Codes. An internal adjustable spring in the hinge closes the door when they are opened. So instead of using a door closer, you can use these spring hinges. One draw back is you can not slow the door down and they will slam shut. We do not recommend these self closing hinges if your door swings more than 110 degrees, chances are the spring will break. They are constructed of 10 gauge (.134”) steel that is then plated or paint primed. We ship them in boxes of 3 hinges, and they ship with machine and wood screws.
Shown in brushed brass
G400XX -
Full Mortise Medium Duty Hinge
The Full Mortise Medium Duty Hinge are a standard butt hinge. They are designed for medium weight doors with a high frequency of usage, but usually interior doors with a door closer. The hinge offers two bearings, to provide easy rotation. They are constructed of 10 gauge (.134”) steel that is then plated or paint primed. We sell them in boxes of 3 hinges, and they ship with machine and wood screws.
Shown in brushed chrome
G200XX -
Full Mortise Heavy Duty Hinge
The Full Mortise Heavy Duty Hinges are standard butt hinge. They are designed for heavy weight doors with a high frequency of usage. These are ideal for exterior doors in schools, hospitals and other commercial venues. The hinge offers four bearings, one between each leaf of the knuckle. They are constructed of 7 gauge (.180”) steel that is then plated or paint primed. We sell them in boxes of 3 hinges, and they ship with machine and wood screws.
Shown in brushed chrome
G300XX -
Norton 7700 Power Track Hook-Up Boxes
Norton 7700/7705PT Hook-Up Boxes come in two voltages, 24 and 120, and two configurations Hinge Side and Stop Side. Hinge Side means the track is on the side of the door that you can see the Hinges, also know as the pull side. Stop Side means the track is on the push side of the door.
PTOHB- -
Ives Roller Bumper Straight Arm 6" RB472
The Ives Roller Bumper Straight Arm 6" RB472 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 6" and the base has a 2" diameter. The device was just like the Glynn-Johnson RB6 or GJRB6.
GJRB6-
