Search results for: 'LATCHES for panic doors'
- Did you mean
- latch for panic doors 0
- latches for panic door 0
- Related search terms
- panic+door+device+1690+x+Dogging+60 1264
- panic door device 1690 x Dogging 60 1264
- panic door device 1690 x dogging detex 1260
- panic+door+device+1790+x+dark 1273
- panic door device 1790 x dark 1274
- panic door device 1690 x dogging duty 1263
- panic door device 1990 x dogging detex 1261
- panic door device 1690 parts 1265
- panic door device 1990 only x dogging devic 1260
- panic door device 1990 only x dogging devi 1261
-
Von Duprin 2227/3327A/9927 Top Latch 050400
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050400
G050400 -
Jackson 1095P Paddle Panic Hardware
The Jackson 1095P Paddle Panic Hardware is an alternative to the cross bar or push pad style panic hardware. The device is the same as the Jackson 1095, but with a paddle instead of the cross bar. This device is for use on aluminum or steel doors only. The device is mounted on surface studs that are tapped into the door. On a wood door they will pull out.
Right Hand Reverse Shown
1095P- -
Von Duprin 2227 Panic Only
The Von Duprin 2227 Panic Only surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3-5/8". For doors as high as 7'1", if your door is higher than 7'1", please call. Ships with all mounting screws and the 299, 304L and 248L-4 Strike
2227EO- -
Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Replacement Latch Bolt Assembly for the Falcon Dor-o-matic 1590. In the old days you could just replace the PB355 (SPRING.127) spring, but as of November 2015 you have to replace the complete latch head assembly.
Doromatic Part # 4270107603
Old Part # PB124GPB124 -
Von Duprin 8827-F Top Latch Kit 050462
The Von Duprin 8827-F Top Latch Kit 050462 is the Top Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Duprin Part # 050462
Old Part # 10267688VR10F -
Von Duprin Panic Device 7500 Mortise Body Only
This Von Duprin Panic Device 7500 Mortise Body Only is used on the Von Durprin 8875, and Von Duprin 98-9975 panic hardware. The body measures 5-7/8" high by 4-1/2" deep and 1" thick. This is the body that has been used since about 1977.
Call or email for pricing on the SS7500, 7500-IN, and E7500 Mortise Bodies and replacement parts for the Lock.
We ship the 7500 in US32D, brushed stainless steel.
G7500 -
Adams Rite Electrified 8800EL Panic Hardware
The Adams Rite 8800EL Electric Latch Retraction Panic Hardware is the same as the 8800, but with an internal solenoid to retract the latch-bolt. This is a very popular device in the Hotel Industry and is usually used in conjunction with a card reader.
The 8800 features the Starwheel locking bolt that interlocks door to the door frame. The 36" version is in stock, we can also get the 30", 42" and 48" devices, lead time is 2-3 weeks. This device is used exclusively on aluminum framed glass storefront doors. Replacement parts are available.
To order specify your Door Width, Color or Finish, and Voltage (12 or 24 Volt).
8800EL -
Von Duprin 2227/3327/9927 Bottom Latch 050401
Von Duprin 22, 33, 9927 Bottom latch.
Used to replace the bottom latch on the Von Duprin 2227, 3327A, and 9927 on devices shipped after October 1998.
Includes screws and sometimes the bracket
Von Duprin Part # 050401
G050401 -
Von Duprin 22 Control Link Pin 050529
Von Duprin 22 Control Link Pin
The control link pin is the connector pin, that connects the latch head assembly to the push bar assembly. When the push bar is pushed in it retracts the latch bolt and the pin connects the two pieces. This Control Link Pin is used on the Von Duprin 22, 33A, 98 and 99 Panic Devices.
VON DUPRIN PART # 050529
Old Von Duprin Part # 969520G22R60 -
Falcon Mechanical Electric Latch (MEL) Retrofit Kit 47867200
New for 2024 the Falcon MEL 47867200 Mechanical Latch Retraction. Retrofits all 1690, 1790, 24 and 25 Series devices to Mechanical Latch Retraction. This new system uses the PS902 Power Supply. The benefits for the MEL Series over the Older EL series are lower power draw (1 amp verse 16 amp), and more flexible power supply location, longer wire runs and thinner guage wires.
G47867200 -
Dor-o-Matic 2090 Latch Spring PB61
Doromatic 2090 Latchbolt spring. Pushes out the latch bolt.
Doromatic part # SPRING.104
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209060 -
Adams Rite EX88 Rim Panic Device
The Adams Rite EX88 Interlocking Rim Exit Device is designed for heavy duty use on narrow stile aluminium door applications. The EX88 has a unique latch bolt design that interlocks with the frame of the door. This device is non handed, requires a minimum stile width of 2" and will work on aluminum, hollow metal or wood doors.The device is constructed of extruded aluminum with matching metal angled end caps. To order specify your door width, and the color.
EX88- -
Von Duprin 9927 Panic Device
Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The Von Duprin 9827 device has a smooth mechanism case and the Von Duprin 9927 device has a grooved case. The surface vertical rod device is non-handed.
9927EO- -
Sargent 97-2434 Old Style 8700 Top Latch
Sargent 97-2434 Old Style 8700 Top Latch
The Sargent 97-2434 Old Style Top Latch was used on the 8706, 8710, 8713, 8715, 8728, 8740, 8743, 8746, 8762, 8763, 8773, and 8774 Series Surface Vertical Rod Devices before November 11, 2002. We sometimes fine the casting number of 97-0317 stamped on the back of this latch. This Top Chassis has 3 mounting holes.
Sargent Part # 97-2434
G972434 -
Jackson Panic Device 1095 Active Housing
The Jackson Panic Device 1095 Active Housing is the working side of the 1095 panic hardware. The housing comes will all the internal parts, including the latch bolt. The distance between the mounting studs on this case is 6-5/16". Jackson part # 30-988 Right Hand Body, and part # 30-989 Left Hand Body
Left Hand Housing shown in the aluminum finish.
G1095xx -
Cal Royal Panic Device 2000 Series Lever Trim
Cal Royal 2000 Series Exit Device Lever Trim
Non-handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For
1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
thickness. Available for fire and non fire rated rim and
vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”.ENTOOL- -
Dor-o-Matic 2090 Latch Link PB62
Dor-o-matic 2090 latch link
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209040