Search results for: 'door series 30 push bar panic exit detex parts'
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 pull bar panic exit dor parts 1310
- exit door panic devicemo square screws parts Store room function 1309
- exit door panic device square screws parts 1318
- exit door panic devices square screw parts 1317
- exit door panic devic square screws parts 1317
- exit door panic device square screw parts 1317
- door series 30 pull bar panic exit deep parts 1308
- door o matic 1 panic device 1309
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Dor-o-Matic EL1490 Panic Device
Doromatic EL1490 Exit Device with Electric Latch Retraction
The Doromatic 1490 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1490 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Replacement parts are also available
Shipped with all screws and strikes.
EL1490EO -
Dor-o-Matic 1690/1990 Top Rod-PB24
Dor-o-Matic 1690/1990 Top rod. Connects panic bar to the bottom latch
Doromatic Part # 4270100017 PB24
Select the height of your door for the correct rod.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199024T- -
Norton Door Closer 7700 Series Power Track
The Norton Door Closer 7700 Series Power Track combine the functions of a single point electromechanical door holder with the proven reliability of a 7700 Series Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available with or without an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations or the frame soffit for push side installations.
Two versions, the Master Unit (PTDO) and the Support Unit (PTO). The PTDO has an integral smoke detector. The PTO can be plugged into the PTDO or into your existing fire alarm system. Both units can be mount pull side of the closed door, or the push side, please specify when ordering. Specify voltage (24 volt or 120 volt) and color (aluminum or dark brown). Dark Brown is a 3 week lead time, Aluminum is in stock.Supply Chains have really caused some issues on this door closer, we recommend calling or emailing to check the availability of this door closer.
7705PT- -
Sargent 20/30/60/80 Dogging Kit 68-2596
The Sargent 20/30/60/80 Dogging Kit 68-2596 is used on the Sargent 20, Sargent 30, Sargent 60, and Sargent 80 Series Panic Hardware. This dogging assembly kit has been around since the 1980's. We only sell the dogging assembly parts as a complete set.
Sargent part # 68-2596
G80200 -
International Door Closer 8610S Rim Device-Grade 1
International 8610S Rim Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
8610S- -
Von Duprin 22 Panic Only 22EO
The Von Duprin 22 Panic Only 22EO is part of the economy series. Even though is it the least expensive Von Duprin, it is still a very heavy duty panic device. It is for all types of single and double doors with mullion, for door stiles as narrow as 3-13/16”. All 22 Series exit devices are UL listed for Panic Hardware or Fire Hardware, and are certified to ANSI A156.3, Grade 1. The Von Duprin 22 ships with the 299 standard strike, dog key, and all of the needed mounting fasteners. Even though it is the least expensive, they offer all the replacement parts, just like there other models. We stock all of the replacement parts Von Duprin has to offer on the 22 and 2227 series.
We keep the 36” devices in stock in the SP28 Sprayed Aluminum and SP313 Sprayed Dark Brown in stock.
Von Duprin Part # 22EO22EO -
Falcon / Dor-o-Matic MEL1690 Panic Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Replacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
Monarch / Falcon 25-R Series Rim Panic Device | Panic Hardware
Monarch / Falcon 25-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2" dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time25EO- -
Von Duprin Panic Device 230L Lever Trim
The Von Duprin Panic Device 230L Lever Trim will work on the 22 and 2227 series exit devices. In 2008 this lever was redesigned and went from a key in the lever to the new style which has the key above the lever. The plate measures 3" wide by 6-3/8" high and is 15/16" thick. This lever only comes in sprayed aluminum or dark bronze. We also have replacement parts for this particular trim piece in stock, email us under the contact tab at the top of the page.
Cylinder not included
22L -
Von Duprin 55EO Panic Hardware
The Von Duprin 55EO Rim Exit Device is used primarily on aluminum framed glass doors, otherwise known as Narrow Stile Doors. It is one of the most heavy duty cross bar devices made, and has been in production since at least the 1970's. It will fit on Stile widths of 1-3/4", and ships with all the mounting screws, dog key and the 1409 Surface Strike. The device is also non handed.
55EO- -
Monarch 19-R Exit Panic Device
Monarch 19-R Exit Panic Device
- Hand: Non-Handed.
- Functions: All functions built into “EO” device.
- Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313; Stainless Steel-US32D
- Latchbolt: Stainless steel, 3⁄4" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Stock Sizes: 3'0" and 4'0"
- Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
- Projection: 2-1⁄2" maximum; 1-7⁄8" dogged.
36" device is only 33-1/2" wide
48" device is only 43-1/2" wideG19EO- -
Sargent Exit Device 80 Series Plastic End Cap And Bracket
Sargent Exit Device 80 Series Plastic End Cap And Bracket
includes the end cap, bracket and mounting screws. This plastic end cap always breaks. You might want to consider trying the new impact resistant end cap shown in the related products, on the right hand margin of the page.
Used on the Sargent 80 Series Exit Devices
Part #'s 68-0561, 68-0511 and 97-0052
G80300 -
Sargent 20/30/60 End Cap Bracket
The Sargent 20/30/60 End Cap Bracket is used with the larger end cap. This end cap has been manufactured for the last 40 years and started its life on the obsolete 60 Series. The bracket holds the hinge side of the exit device on the door, and the G20300C fits over the top of it.
Sargent part #68-2141
G20300B -
Yale 2100 Panic Device
Yale 2100 Exit Device
Door Opening Width:
-36 for 30" - 36" (76.2cm - 91.4cm) doors, Actual width is 31-3/4"
-42 for 36" - 42" (91.4cm - 107cm) doors, Actual width is 37-3/4"
-48 for 36-1/2" - 48" (92.7cm - 121.9cm) doors, Actual width is 43-3/4"
Door Thickness: 1-3/4" (44mm) standard.
Minimum Stile Width: 4-1/2" (114mm)
Projection: 2-1/2" (64mm) active, 1-3/4" (44mm) depressedAluminum is in stock, Dark Bronze has a 2 week lead time
2100EO- -
Adams Rite EX88 Rim Panic Device
The Adams Rite EX88 Interlocking Rim Exit Device is designed for heavy duty use on narrow stile aluminium door applications. The EX88 has a unique latch bolt design that interlocks with the frame of the door. This device is non handed, requires a minimum stile width of 2" and will work on aluminum, hollow metal or wood doors.The device is constructed of extruded aluminum with matching metal angled end caps. To order specify your door width, and the color.
EX88- -
Jackson Panic Device 1095 Standard Strike
The Jackson Panic Device 1095 Standard Strike is a strike they have been using for the past 20 years. You might have one of the older roller strikes, but this will work in its place. The older style roller strike is no longer available. Jackson Exit Device part # 30-2436.
G109556 -
Rixson 28 Series Door Closer
Center Hung Door Closer
• Available (NHO) non-hold open, or (SHO) selective
hold open. Specify degree (90 or 105°)
• Standard top pivot: 340 included
• Cycolac cement case
• Separate independent valves for closing,
latch and backcheck adjustments
• Built-in positive dead stop prevents door
from swinging beyond desired opening
degree
• Vertical and horizontal door adjustment
• Arm centering adjustment28 -
Door Push Plate 70
The Door Push Plate 70 is our thickest plate we offer. The plate is 1/8" thick, and is aluminum, brass, stainless steel, or bronze depending on the finish. All 4 edges are beveled. We offer this plate in many sizes, and it ships with matching mounting screws.
GPH70- -
Dor-o-Matic 1490 Panic Device
The Doromatic 1490 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1490 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Replacement parts are also available
Shipped with all screws and strikes.
1490EO- -
Falcon 25-V Vertical Rod Panic Device
Falcon 25-V Vertical Rod Panic Device
The Monarch Falcon 25-V is designed for high-traffic applications were added strength and durability are required. The device includes all strikes and mounting screws required for installation. Available in 3' and 4' devices, the 3' device is for doors 30" to 36", the 4' device is for doors that are 37" up to 48" wide. The vertical rods furnished with this device are for doors up to 7' tall, if your doors are taller, please contact us.
G25VEO- -
Monarch 19-V Exit Panic Device
Monarch 19-V Exit Panic Device
- Hand: Field reversible.
- Functions: All functions built into “EO” device.
- Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
- Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Stock Sizes: 3'0" and 4'0"
- Doors: 13⁄4" thick, wood or metal.
- Narrow Stile Doors: To 1-3⁄4" N.S. aluminum. With control trim–2-1⁄4" min. stile.
- Projection: 2-1⁄2" max., 1-7⁄8" dogged.
G19VEO- -
Hager 5400 Series Door Closer
Hager 5400 Series Door Closer
This Hager Door Closer is a Grade 2 closer. The hole spacing is 3/4" x 9-1/16" center to center. The closer comes with the ability to go left or right, push, pull or top jamb mounting.
We ship the 5400MLT04, aluminum is in stock, Dark Bronze has a 3 week lead time
5400- -
Jackson Panic Device 2085 Dogging Assembly LH/RHRB
Jackson Exit Device 2085 Dogging Assembly LH/RHRB
This Jackson Exit Device dogging assembly is used on the 2085 Device made after October 1, 1999. It will work on the previous version of this exit device, but you may have to use a file a remove some material from the catch.
Jackson Part # 30-2462
This spring would be for the Device on the Right, shown below.
G302462 -
Monarch / Falcon 24-R Series Rim Exit Device
Monarch / Falcon 24-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
- Hand: Non-handed.
- Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN. - Strikes: 299 strike standard.
- Latchbolt: Stainless steel, 3⁄4" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
- Projection: 2-3⁄4" maximum, 2” dogged.
- Mounting Height: 40-1⁄4" from CL to finished floor.
- Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard. - ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
- Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.
Call for pricing on non listed finishes
2 week lead time24EO-- -
Von Duprin 33/35/98/99 EL Dogging Rod 3' 050531
Von Duprin 050531 EL Dogging Rod 3'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 3' designates the model it is used on. The 3' model is used on doors 36" or under. The Rod measures roughly 11" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices
Von Duprin Part # 050531, Old Part # 110007
G050531 -
Von Duprin 33/35/98/99 EL Dogging Rod 4' 050532
Von Duprin 050532 EL Dogging Rod 4'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 4' designates the model it is used on. The 4' model is used on doors 48" down to 36". The Rod measures roughly 17" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices. Use part # G050531 if your door is equal or under 36".
Von Duprin Part # 050532, Old Part # 110008
G050532