Search results for: 'door series 30 push bar panic exit devic parts'
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit deep parts 1309
- exit door panic device square screws parts 1318
- exit door panic devices square screw parts 1317
- exit door panic devic square screws parts 1317
- exit door panic device square screw parts 1317
- door series 30 pull bar panic exit deep parts 1308
- door o matic 1 panic device 1309
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Cal Royal Panic Device 7760 Surface Vertical Rod
Cal Royal 7760 Surface Vertical Rod Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware.
Templating matches the Von Dupin 99 and 98
CR7760EO -
Rixson 28 Series Door Closer
Center Hung Door Closer
• Available (NHO) non-hold open, or (SHO) selective
hold open. Specify degree (90 or 105°)
• Standard top pivot: 340 included
• Cycolac cement case
• Separate independent valves for closing,
latch and backcheck adjustments
• Built-in positive dead stop prevents door
from swinging beyond desired opening
degree
• Vertical and horizontal door adjustment
• Arm centering adjustment28 -
Von Duprin Dogging Hook 090044
The Von Duprin Dogging Hook 090044 is the piece that grabs the push bar mechanism and keeps it in the dogged position. The does wear out, but it takes a long time. This piece is used on the 22, 33A, 35A, 98 and 99 series devices made after 1997. We sell this part individually and it is #5 on the diagram.
G090044 -
Cal Royal 4400 Rim Panic Device
The Cal Royal 4400 Rim Exit Device has a Grade 2 rating. The device features a 3/4" Latchbolt, Roller Strike and a 1" diameter Crossbar. The device comes in a brushed chrome and dark bronze finish, and comes with either a 36" or 48" crossbar. You would need a 4-1/2" minimum stile width.
CR4400- -
Yale 7100F Series Latch Assy 60-7000-0425-048
Yale 7100F Series Latch Assembly
This Yale Latch Assembly is used on fire rated panic devices. A fire rated panic is a device were you can not lock the latch in the open position. It is used on doors were the engineers want the door to latch every time it closes to contain a fire.
Yale Part # 60-7000-0425-048
G6070000425048 -
Door Push Plate 70
The Door Push Plate 70 is our thickest plate we offer. The plate is 1/8" thick, and is aluminum, brass, stainless steel, or bronze depending on the finish. All 4 edges are beveled. We offer this plate in many sizes, and it ships with matching mounting screws.
GPH70- -
Monarch 17/18/19 Series Dogging Cover
Monarch 17/18/19 Series Dogging Cover
This Monarch 17/18/19 Series Dogging Cover goes over the dogging mechanism on the hinge side of the exit device. Sometimes when the end cap goes missing, this cover plate also disappears.
Monarch old part #s 195 and 194
Monarch/Falcon new part #'s 650297 and 650303G19R80 -
Jackson Panic Device 1085 And 1095 Dogging Pin
The Jackson Panic Device 1085 And 1095 Dogging Pin is the piece that keeps the hardware in the open position during business hours. It is activated by pressing the crossbar and then turning the flat head screw driver head. The pin is held in the housings with a screw, which is located on the back of the housing. This pin has been used since about 1988 or so, the old style are no longer made, but they had a roll pin that was used to hold it in place. This package comes with a new spring, set screw and the pin. The Jackson part number on this is 30-1115.
G108554 -
Sargent 2828 Series Rim Panic Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warrantyG20EO- -
Hager 5400 Series Door Closer
Hager 5400 Series Door Closer
This Hager Door Closer is a Grade 2 closer. The hole spacing is 3/4" x 9-1/16" center to center. The closer comes with the ability to go left or right, push, pull or top jamb mounting.
We ship the 5400MLT04, aluminum is in stock, Dark Bronze has a 3 week lead time
5400- -
Von Duprin 3327A Panic Device Only
Von Duprin 3327A Exit Device Only
3327A and 3527A for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 3527A has a smooth mechanism case and the 3327A has grooved case. 3327A/3527A fits door stiles as narrow as 1-3/4". Newly designed device has a one piece center case cover.
3327AEO -
Jackson 1095 30-1247 / 30-1248 Lever Arm
The Jackson 1095 30-1247 / 30-1248 Lever Arm. Replacement Lever Arm for the Jackson 1095 Active Housings. This arm will only work on the 1095 Active Case! The difference between this arm and the 1085 arm is the Pin in in the top of the arm. The pin fits into the triangular linkage clip, which actuates the latch bolt. Handing is determined by standing inside and looking out, if the arm in on the right hand side of the door, it is a right hand lever that you would order.
G10955X -
Jackson 30-2674 1285/1295 Cover Package
Jackson 30-2674 1285/1295 Cover Package
Jackson part # 30-2674-313 and 30-2674-628 Cover Plate for use on the 1285 and 1295 devices.. Plates measure 2-11/16" x 7-1/2 and 2-11/16" x 2-1/8", two plates in each package.
Jackson Part #'s 30-2674-313 and 30-2674-612
G302674- -
Door Push Plate 50
The Door Push Plate 50 is the most common push plate we find out in industry today. It does not matter what type of commercial building you go into, you will find this style and thickness plate. The are offered in standard sizes, that are shown below, and can be made to custom sizes. The plates are 16 gauge metal (.050 thick) and are shipped with 4 beveled edges. The matching finiish screws are shipped with each plate.
3 x 12" GPH312
3.5 x 15" GPH315
4 x 16" GPH416
6 x 16" GPH616
4 x 20" GPH420
8 x 16" GPH816GPH50 -
Cal-Royal 45 Narrow Stile Rim Device
The Cal-Royal 45 Narrow Stile Rim Device is part of the new 4500 Series. They are designed for Narrow Stile doors with a minimum of an 1-3/4" stile width. This is a Grade 1 Exit Device, which is the highest traffic rating possible. Exit device ships with strike and mounting screws.
Shown is Left Hand Reverse
Opposite would be Right Hand Reverse45-RIM -
Von Duprin Thumb Piece 970488
The Von Duprin Thumb Piece 970488 is just the thumb piece only, rivet not included. Cast bronze construction, and then plated to the selected finish. 5-1/8" overall length, but note that the length is usually cut down in the field depending on the thickness of your door.
Von Duprin Part # 970488
Old Part # 960303G970488- -
Von Duprin Panic Device 880K Trim
The Von Duprin Panic Device 880K Trim is for use with the 88 series devices only. Plate measures 3" wide by 14-3/16" long with an 1-5/8" diameter bore for cylinder. Knob projects out 2-3/4". We do not sell many of these anymore, due to ADA requirements, but they are still available.
88K- -
Von Duprin Panic Device 990TP Trim
The Von Duprin 990TP Trim is known as a Thump Piece Trim. The key cylinder locks and unlocks the thumb piece, key cylinder sold separately. This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building. If you have a different manufacture or a different Von Duprin series on the interior, it will not line up. On the back of this plate we usually find the number 990 stamped on it. The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices. If you have a Mortise or Concealed Vertical Rod, call us and we will order that model. The plate measures 3" wide by 14-3/16" tall. Order here for the 990TP-R&V.
99TP -
Cal Royal Products 900 Series Door Closer
The Cal Royal Products 900 Series Door Closer is a unique one, it is the only closer that has the 3/4" x 11-1/8" hole spacing. We have seen a few versions of this closer, some have 6 mounting holes, and some have 4. If your closer has a spacing of 11-1/8", and has 3 holes on each size, this is the only closer I know of that is like that. The 900 Series is a Grade 1 closer, the heaviest duty rating possible. The door closer has adjustable spring tension, closing, latching and back check valves and is Barrier Free rated. The package comes with all of the mounting screws and a parallel arm bracket, so it can be mounted on the left, right, push, pull or top jamb for mounting.
900P- -
Sargent 8700 Panic Device
For Doors Wood or metal. 1-3/4" (44 mm) thick standard.
minimum stile with trim and 3-1/2"
Mounting Supplied standard with wood and machine screws
Chassis Cover Cold drawn brass, bronze or stainless steel
Chassis Nonferrous alloy
Hand Handed. Specify RHRB or LHRB
Dogging Feature Allen-type dogging furnished standard.
Top and Bottom Bolts Brass, stainless steel8700EO