Search results for: 'door series 30 push bar panic exit devic parts'
- Related search terms
- door series push bar panic exit dor cal parts 1307
- door series 30 pull bar panic exit dor parts 1309
- exit door panic devicemo square screw parts 1307
- exit door panic devicemo square screws parts Store room function 1308
- door series 30 push bar panic exit deep parts 1309
- exit door panic devices square screw parts 1317
- exit door panic devic square screws parts 1317
- door series 30 pull bar panic exit deep parts 1308
- door o matic 1 panic device 1309
- dooramatic door series 30 push bar panic exit devic parts 1314
-
Cal Royal Panic Device 2000 Alarmed
Cal Royal 2000 Alarmed Exit Device
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.
Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.ALM2000 -
Detex Advantex 10 Series Rim Device
Detex Advantex 10 Series Rim Device
The Detex 10 Series is a Super-Heavy-Duty panic device, built to with stand 1,000,000 cycles, twice the standard for Grade 1 rated devices. Designed for high-use and high-abuse environments. Non Handed with 1/4 turn hex dogging.
G10REO- -
Von Duprin 9927 Panic Device
Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The Von Duprin 9827 device has a smooth mechanism case and the Von Duprin 9927 device has a grooved case. The surface vertical rod device is non-handed.
9927EO- -
Bilco Barracuda DSO-PB for Out Swinging Doors with Panic Devices
The Barracuda DSO-PB is for use on Out Swinging 36" Doors with Exit Devices. It is constructed of heavy duty steel with a durable powder coated finish. The bar goes across the door frame and grabs the mounting cleat with an adjustable clamp. To secure the door, simply turn the handle until it is secured. They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4". This device ships with all of the hardware and a wall mounting rack for storage.
DSO-PB -
International Door Closer 5510S Rim Device
International 5510S Rim Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.5510S- -
Von Duprin 33/35/98/99 EL Dogging Rod 3' 050531
Von Duprin 050531 EL Dogging Rod 3'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 3' designates the model it is used on. The 3' model is used on doors 36" or under. The Rod measures roughly 11" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices
Von Duprin Part # 050531, Old Part # 110007
G050531 -
Norton Door Closer 7700 Series Power Track
The Norton Door Closer 7700 Series Power Track combine the functions of a single point electromechanical door holder with the proven reliability of a 7700 Series Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available with or without an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations or the frame soffit for push side installations.
Two versions, the Master Unit (PTDO) and the Support Unit (PTO). The PTDO has an integral smoke detector. The PTO can be plugged into the PTDO or into your existing fire alarm system. Both units can be mount pull side of the closed door, or the push side, please specify when ordering. Specify voltage (24 volt or 120 volt) and color (aluminum or dark brown). Dark Brown is a 3 week lead time, Aluminum is in stock.Supply Chains have really caused some issues on this door closer, we recommend calling or emailing to check the availability of this door closer.
7705PT- -
Dor-O-Matic 2090 Panic Device
The Dor-O-Matic 2090 Panic Device has been around since the early 1970's. Even though it is now called the Falcon 2090 Panic Hardware, it is the same exact device. The 2090 provides balanced appearance, dependable performance and economical pricing, making it a popular choice where rim exit devices are required. The package includes both housings, 41" crossbar (that can be cut in the field), mounting screws and strike.
Hand: Specify RHR or LHR, not reversible. See Below
Left Hand Reverse shown in picture
Latchbolt: 1/2" throw hardened steel.
Dogging Feature: Hex dogging standard.
Sizes: Field adjustable width, 41" crossbar standard, fits
3' 8" door width, extra length crossbars available.
Doors: 1-3/4" thick metal or wood doors, specify if wood door.
Projections: 4-3/8" extended, 2-1/2" depressed.
Stile: 1-3/4" minimum.Replacement parts are also available
G2090EO -
Sargent 20/30/60/80 Dogging Kit 68-2596
The Sargent 20/30/60/80 Dogging Kit 68-2596 is used on the Sargent 20, Sargent 30, Sargent 60, and Sargent 80 Series Panic Hardware. This dogging assembly kit has been around since the 1980's. We only sell the dogging assembly parts as a complete set.
Sargent part # 68-2596
G80200 -
Von Duprin 33/35/98/99 EL Dogging Rod 4' 050532
Von Duprin 050532 EL Dogging Rod 4'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 4' designates the model it is used on. The 4' model is used on doors 48" down to 36". The Rod measures roughly 17" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices. Use part # G050531 if your door is equal or under 36".
Von Duprin Part # 050532, Old Part # 110008
G050532 -
Detex ECL-230D Alarmed Panic Device
The Detex ECL-230D Alarmed Exit Device is a battery operated, rugged deadbolt panic device. The steel paddle is photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits. The device features a single point 1" dead bolt, attack resistant design withstands over 2200 pounds of outside pull force and is non handed. Locking and unlocking the dead bolt always arms and disarms the alarm. Rim Cylinder is not included.
If you have a door that requires Panic Hardware, then use the ECL-230D-PH
ECL230D- -
Von Duprin Panic Device 880TP Trim
The Von Duprin Panic Device 880TP Trim is for the 88 series only. The stanchions welded on the back line up with the 88 device on the interior. The optional key cylinder locks and unlocks the thumb piece. The plate measures 3" wide by 14-3/16" long with an 1-5/8" bore hole for cylinder.
Von Duprin part # 880TP-R
88TP- -
Detex ECL-230D-PH Alarmed Panic Device
The Detex ECL-230D-PH Alarmed Exit Device is a battery operated, rugged deadbolt panic device, and is UL-Listed Panic Hardware for 36" to 48" doors. The steel paddle is photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits. The device features a single point 1" dead bolt, attack resistant design withstands over 2200 pounds of outside pull force, and is non handed. Locking and unlocking the dead bolt always arms and disarms the alarm. Rim Cylinder is not included.
ECL230DPH- -
Von Duprin Panic Device 990NL Trim
The Von Duprin Panic Device 990NL Trim is known as a Night Latch Trim. This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building. The key locks and unlocks the interior exit device. If you have a different manufacture or a different Von Duprin series on the interior, it will not line up. On the back of this plate we usually find the number 990 stamped on it. The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices. If you have a Mortise or Concealed Vertical Rod, call us and we will order that model. The plate measures 3" wide by 14-3/16" tall. Order here for the 990NL-R&V. The key cylinder is sold separately.
99NL -
Jackson Panic Device Mounting Stud 1085/1095
The Jackson Panic Device Mounting Stud is for use on the 1085 and 1095 panic hardware. Each door would have 2 on the left and 2 on the right, so a total of 4 studs per door. The housings fit over these studs and are held in place by an 1/8" set screw, there are two of these set screws at the top and one on the bottom. The threaded part has a 1/4-20 thread.G108544 -
Doromatic Exit Device 2090 Active Case
The Doromatic Exit Device 2090 Active Case is for use on the 1090 and 2090 panic hardware. This device has been around since the early 1970's, and is now called the Falcon 2090 Active Case, but it is the same piece. Includes all of the interior hardware. Just unscrew or loosen the three set screws and remove your old case and install and tighten the three set screws. Housing measures 7-1/2" long by 1-3/16" wide, mounting studs have a 6-1/4" center to center distance.
LEFT HAND HOUSING SHOWN IN PICTURE
4270902740 Left Hand Aluminum Stock
4270902742 Left Hand Dark Brown Stock
4270902743 Left Hand Black * One week lead time
4270902746 Right Hand Aluminum Stock
4270902748 Right Hand Dark Brown Stock
4270902749 Right Hand Black * One week lead timeG209001 -
Falcon / Dor-o-Matic EL2390 Panic Hardware
Doromatic EL2390 Exit Device
The EL2390 is a Grade 1 exit device designed for high use and abuse, and delivers a variety of performance features that ensure smooth, easy and reliable operation. We only recommend this device when you have an existing 2390, that your want to control access to with either a card reader or inside button. Easier rod adjustment simplifies installation. This device is for replacement of older worn out Falcon / Dor-o-Matic 2390's. This is not a good exit device to use to replace devices from different manufactures.To order specify:Door Width:42" (Device size has a 21" Touchbar)
48" (Device size has a 24" Touchbar)Color:
Aluminum
Dark Bronze
Device Centerline to Finished Floor Measurement in inches:EL2390EO- -
Von Duprin Panic Device 8827 Center Case 050415
The Von Duprin Panic Device 8827 Center Case 050415 is for use on the non fire rated 88 surface vertical rod. You can tell the difference by the dogging screw. If you have a Dogging Screw on your device, then this is the correct part. Includes the internal pieces, including the Rod Control.
Von Duprin part # 050415
88VR120- -
Jackson Panic Device Top Bolt Trip 1085/1285/2086
The Jackson Panic Device Top Bolt Trip is for use on the 1085, 1285, and 2086 devices. The 30-824 Trip Assembly mounts on the jamb stop and has a pin that sticks out of it (actually a threaded set screw). The pin lines up with the release plate on the Top Bolt Guide Assembly, when the pin hits the top plate as the door closes, it releases the rods, so they can extend.
G108558 -
Von Duprin Panic Device 880NL Trim
The Von Duprin Panic Device 880NL Trim is for the 88 Series only. The stanchions welded on the back of the plate line up with the88 device on the interior. Optional key cylinder locks and unlocks the device, and can be used for dogging the door open. Plate measures 3" wide by 14-3/16" long, with an 1-5/8" bore for cylinder.
Von Duprin part # 880NL-R
880NL -
Von Duprin EL99 Panic Device Only
This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.
The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.
EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system.
UL approved for Class II circuit applications.
The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS914 power supply.
The PS914 with the 9002RS option card is the minimum option card required. Other option cards available for other functions, see PS914 power supply for additional information.
Ships with all the mounting screws and the 299 Strike.
EL99EO-Von Duprin Panic Device 7500 Mortise Body Only
This Von Duprin Panic Device 7500 Mortise Body Only is used on the Von Durprin 8875, and Von Duprin 98-9975 panic hardware. The body measures 5-7/8" high by 4-1/2" deep and 1" thick. This is the body that has been used since about 1977.
Call or email for pricing on the SS7500, 7500-IN, and E7500 Mortise Bodies and replacement parts for the Lock.
We ship the 7500 in US32D, brushed stainless steel.
G7500International Door Closer 5530S SVR Device-Light Duty
International 5530S Surface Vertical Rod Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.Standard vertical rod accommodates 7’ or 8’ doors
We offer the aluminum and dark bronze finish online, the polished brass and stainless steel finishes are available.
5530S-International 5000 Series 53K01 Lever Trim
International 5000 Series 53K01 Lever Trim
The International 53K01 Lever Trim is for the 5000 Series International panic device. The rose diameter is 3-3/8", with a lever length of 4", and the projection is 3". Available in Aluminum or Dark Bronze colors. Available in Classroom and Storeroom functions. Classroom function the key locks and unlocks the Lever Handle, if you turn the key one way it is only unlocked for that one passage, if you turn the key the other way, the Lever is unlocked until it is locked again. Storeroom/Night Latch function the Lever is always locked.
53K01-Falcon SWITCH.1006 Request to Exit Switch
The Falcon SWITCH.1006 Request to Exit is for use on the Falcon and Dor-O-Matic 1690, 1790 and 2390 devices, produced after June 2002. The Request to Exit Switch allows you to cut the current to various devices when the push bar in depressed.
SWITCH.1006Von Duprin 2670 Guard-X Panic Device
Heavy Duty Design
The new Series 2670 Exit Alarm Lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1 1/4" (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.Fits 36" to 48" doors.
Uses 9 volt battery
Ships with all mounting hardware and strike.2670EO-