Ives

View as Grid List

Items 1-36 of 77

per page
Set Descending Direction
Page
  1. Ives 7212 Pivot Set

    • Handed
    • Top, header mount
    • Bottom, jamb mount
    • Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
    • Maximum door load 200 pounds
    • Vertical adjustment range 3/16", with positive locking

    Handing diagram

    7212
    As low as $153.70
  2. Ives 7212INT Intermediate Pivot

    • Use with 7212, 7212V or 7222 3/4 Offset Pivot
    • Handed
    • Vertical adjustment 3/16", include positive locking.

    Handing diagram

    7212INT
    As low as $121.25
  3. Ives 7222 Pivot Set

    • Handed
    • Top, header mount
    • Bottom, base plate mount
    • Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
    • Maximum door load 200 pounds
    • Vertical adjustment range 3/16", with positive locking

    Handing diagram

    7222
    As low as $153.70
  4. Ives 7222INT Intermediate Pivot

    • Use with 7212, 7212V or 7222 3/4 Offset Pivot
    • Handed
    • Vertical adjustment 3/16", include positive locking.

    Handing diagram

    7222INT
    As low as $121.25
  5. Continuous Full Mortise Hinge

    The Ives 112HD Continuous Full Mortise Hinge Geared Hinge measures 83" long and is constructed of extruded aluminum.  This hinge is non handed, and will work on doors up to 48" wide and 450 pounds.  You can easily cut this hinge in the field if your door is less than 83" high.

    GFM100-
    As low as $242.88
  6. Continuous Full Surface Geared Hinge

    The Ives 157XY Continuous Full Surface Geared Hinge is an ideal solution for the replacement or worn or broken storefront door pivots, which we run across quite often. I our opinion this is the best solution if you can not find a compatable replacement pivot. The geared hinge will not allow the door to twist, which makes your door more sturdy in the frame. This hinge measures 83" long and is 3-7/16" wide included the cover which hides the screw mounting. A patented easy to install, heavy duty hinge which offers lateral and vertical adjustablility whle the door is still hanging. The hinge is non handed, will mount on a narrow frame, can be cut down in the field and will work on doors up to 550 pounds. 12-24 x 1/2" steel self drilling and tapping screws are included.
    GFS102-
    As low as $221.38 As low as $185.00
  7. Floor Door Stop FS442

    Floor Door Stop FS442

    This Floor Mounted Door Stop used to go by the name Glynn Johnson GJFB19 or FB19. When Ingersoll Rand purchased H. B. Ives in the 1990's they brought it over under the Ives Floor Mounted Door Stop FS442. Features: Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts. Accommodates door undercut up to 2". Heavy-Duty cast brass or aluminum construction. Non-marring rubber bumper. This door stop has an overall height 2-7/8". Mounted shield and screws included.

    Plated Door Finishes

    GJFB19-
    As low as $25.81
  8. Ives Dust Proof Strike DP1

    Ives Dust Proof Strike DP1

    • Designed for use with the bottom bolt of all flush bolts.
    • Spring-loaded plunger returns to floor or threshold level anytime
    flush bolt is retracted, eliminating need to clean standard
    floor strikes.
    • Strike hole is 3/4" Diameter and 1-1/8" Deep

    DP1 Face Plate: 1-7/16" Diameter
    Body: 1-3/16" Diameter x 1-7/8" Deep

    Plated Door Finishes

    DP1-
    As low as $20.87
  9. Dust Proof Strike DP2

    • Designed for use with the bottom bolt of all flush bolts.
    • Spring-loaded plunger returns to floor or threshold level anytime
    flush bolt is retracted, eliminating need to clean standard
    floor strikes.
    • Strike hole is 3/4" Diameter and 1-1/8" Deep


    DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
    Body: 1-3/16" Diameter x 1-7/8" Deep

    Plated Door Finishes

    DP2-
    As low as $24.67
  10. Crash Chain Door Stop CS115

    Crash Chain Door Stop CS115

    • Specially designed for full-size exterior doors.
    • Tear resistant, grey vinyl cover.
    • Heavy duty compression spring assembled to both ends of chain
      and end brackets.
    • Packed with sheet metal screws.
    • Cast Brass brackets with solid, welded steel chain.

    Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
    by the location of your door closer

    PART # LENGTH
    GCC205 20-1/2"
    GCC255 25-1/2"
    GCC305 30-1/2"

    GCC205-
    As low as $43.01
  11. Kickdown Door Holder Rubber Shoe

    Door Holder / Stop Rubber Shoe

    Replacement Rubber Shoe
    5/8" insert diameter
    1" base diameter
    7/8" overall height

    Ives Part # HRT or FSPART.1075

    GJ
    $1.77
  12. Rubber Shoe For GJ1153M

    The Replacement Rubber Shoe For GJ1153M or Ives FS1153. Constructed of rubber.  Ives part # FSPART.1060

    GJ1153
    $2.53
  13. Plunger Door Holder / Stop FS1153

    The Ives Plunger Door Holder / Stop FS1153 is manufactured by H.B. Ives and features a contemporary yet economical method of positive Hold-Open.  This was another one of the Glynn-Johnson door stops that was merged in the H.B. Iver product line in the 1990's, and went by the 1153 part number.  This door stop is constructed in sturdy cast aluminum for years of service.  The spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever.  The stop has a 1-5/8" throw or projection for all types of doors.  The ribbed non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn.  These are sometimes called pop-up or push down stops.  Ships with mounting screws.

    Aluminum finish only

    GJ1153M
  14. Plunger Door Holder / Stop FS1154

    The Ives Plunger Door Holder / Stop FS1154 has been around for about 50 years.  Before the 1990's is was known as the Glynn-Johnson 1154, and when they were merged in the H.B. Ives line, the part number was changed to FS1154.  This product is constructed of cast brass or bronze that is then plated to the desired finish.  Plunger and internal parts are plated steel and provide a 1-1/4" throw for all types of doors.  Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever.  The shoe is non-marring rubber that is securely fastened with a screw in flanged cup to prevent movement or loss, and when worn, shoes are easily replaced and are kept in stock as the GJ1154.  These are sometimes called pop-up or push down stops.  Ships with matching finish mounting screws.

    Plated Door Finishes

    GJ1154M-
    As low as $66.98
  15. Floor Door Stop FS434

    The Floor Door Stop FS434 is another one the old Ives parts that has been around for about 40 plus years.   The FS434 is constructed of burnished wrought steel, with a soft, resilient gray rubber shoe.  The shoe is replaceable and is under related products.  The stop measures 2-5/8" overall height, and the base measures 1-1/2" wide by 2-3/4" long.  This door stop ships with all the fasteners and anchors needed.

    GJ434
  16. 4" Kickdown Door Holder FS455

    4" Kickdown Door Holder FS455

    The H.B. Ives FS455 is what people think about when they say Kick Down Door Stop.  This design has been around for almost 50 years and is try and true.   Durable and ascetically pleasing to look at.  This door holder features a simple hold and release, activated with a touch of the foot.  They are constructed of cast brass or aluminum depending on the finish that you are looking for.  The rubber tip is a non-marring and is corrugated on the bottom so it will not slide on the floor, and is easily replaceable, look under related products for the replacement shoe.  This holder is for door to floor clearances of less than 2".  This is an ideal door holder for the home, office, church or school.

    Made by H.B. Ives

     

    GJ44-
    As low as $9.49 As low as $6.50
  17. 4" Kickdown Door Holder FS452

    4" Kickdown Door Holder FS452

    The H.B. Ives FS452 is another classic kick down door stop.  It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering.  A simple stainless steel spring clip holds the stop in the up position.  The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip.  This stop is shipped with matching finish sheet metal screws.   The 4" model is for door to floor clearances of 2" or less.  The hole spacing is 19/32" x 1-47/64".

    Ives Part # FS452

     

    Plated Door Finishes

    GJ452-4-
    As low as $19.87
  18. 5" Kickdown Door Stop FS452 | Ives FS452 Kick Down Door Holder

    5" Kickdown Door Holder FS452

    The H.B. Ives FS452 is another classic kick down door stop.  It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering.  A simple stainless steel spring clip holds the stop in the up position.  The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip.  This stop is shipped with matching finish sheet metal screws.   The 5" model is for door to floor clearances of 3" or less.  The hole spacing is 19/32" by 1-47/64".

    Ives Part # FS452

    Plated Door Finishes

    GJ452-5-
    As low as $27.77
  19. Wall Door Stop / Bumper Heavy Duty Convex WS402CVX

    The Ives WS402CVX Wall Door Stop is our heaviest duty wall stop of this design.  They are constructed of a heavy duty cast brass base that is then plated to your desired finish.   The wall stop is 2-1/2" in diameter and has a 1" projection.  It features a special retainer cup that makes the rubber tamper resistant.  This stop ships with screw and drywall anchor.

    Plated Door Finishes

    GJ50C-
    As low as $12.59
  20. Wall Door Stop / Bumper Convex WS407-CVX

    The Ives Wall Bumper Stop WS407-CVX our economically price convex wall bumper.  The metal ring is a wrought stainless steel, otherwise known as stamping.  It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time.   Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten.  The bumper is 2-1/2" in diameter and projects out 1".

    Plated Door Finishes

    GJ50W-
    As low as $4.37 As low as $3.00
  21. Wall Door Stop / Bumper Heavy Duty Concave WS401CCV

    The Ives WS401CCV Wall Door Stop is our heaviest duty wall stop of this design.  They are constructed of a heavy duty cast brass base that is then plated to your desired finish.   The wall stop is 2-1/2" in diameter and has a 1" projection.  It features a special retainer cup that makes the rubber tamper resistant.  This stop ships with screw and drywall anchor.

    Plated Door Finishes

    GJ60C-
    As low as $17.08 As low as $13.50
  22. Wall Door Stop / Bumper Concave WS407-CCV

    The Ives Wall Bumper Stop WS407-CCV our economically price concave wall bumper.  The metal ring is a wrought stainless steel, otherwise known as stamping.  It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time.   Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten.  The bumper is 2-1/2" in diameter and projects out 1".

    Plated Door Finishes

    GJ60W-
    As low as $4.37 As low as $3.00
  23. Door Silencers For Wood Doors

    Door Silencers For Wood Doors

    For use on Wood Doors. Insert into 1/4" hole in door frame.

    Height: 3/4"
    Diameter: 3/8"
    Thickness: 1/8"

    GJ65
  24. Door Silencer For Metal Frames

    Rating:
    100%

    For use on metal frames featuring
    pneumatic design that, once installed,
    forms an air pocket to absorb sound and
    reduce noise of door closing.

    Diameter: 1/2"
    Thickness: 1/8"

    GJ64
  25. Kickdown Door Holder Rubber Shoe FSPART.1053

    Kickdown Door Holder Rubber Shoe FSPART.1053

    Replacement rubber shoe
    1/2" insert diameter
    1" base diameter
    1" height

    GJB
    $2.21
  26. Floor Door Stop / Holder FS446

    Floor Door Stop / Holder FS446

    The Ives FS446 Door Stop and Holder is a modification of the FS444, which is the non holder version.   It is considered a manual type floor holder, because you have to manually latch the holder for it to hold the door open.  It is constructed of cast bronze or brass, and is no longer available in a cast aluminum.  It is designed for doors with up to 2-1/2" of undercut, meaning the distance between the finished floor and the bottom of the door. It measures 3-3/4" overall height with a 2-1/2" diameter, and the distance from the base to the center line of the rubber non-marring stop is 2-1/2".  This stop is packed with expansion shield and lead shield.

    Plated Door Finishes

    GJF26-
    As low as $32.89
  27. Floor Door Stop / Holder FS40

    Floor Door Stop / Holder FS40

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1/2" or less
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF40A-
    As low as $49.33
  28. Floor Door Stop / Holder FS41

    Floor Door Stop / Holder FS41

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF41A or F41A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS41. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 9/16" to 1-1/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF41A-
    As low as $51.87
  29. Floor Door Stop / Holder FS42

    Floor Door Stop / Holder FS42

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF42A or F42A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS42. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1-1/8" to 1-9/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF42A-
    As low as $58.19
  30. Floor Door Stop / Holder FS43

    Floor Door Stop / Holder FS43

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF43A or F43A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS43. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1-5/8" to 2-1/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    Plated Door Finishes

    GJF43A-
    As low as $65.65
  31. Floor Door Stop Dome 1" Height FS436

    Floor Dome Door Stop 1" Height FS436

    We ship the H.B. Ives FS436 Floor Dome Stop, another product made by Ives that has been around for 50 plus years.  Take a walk around a school made in the 1960's and you will probably find this door stop, or the hole were it used to be.  This Dome Stop is used on doors without thresholds that have a bottom of the door to floor clearance of less than 5/8".  The are constructed of cast aluminum or cast bronze depending on the finish you are looking for.  The rubber stop is non-marring and replaceable.  The stop has a base that is 1-3/4" x 2" oval, an overall height of 1" and a base height of 3/16".

     

     

    Plated Door Finishes

    GJFB13-
    As low as $4.81 As low as $3.50
  32. Floor Door Stop Dome 1-3/8" FS438

    Floor Door Stop Dome 1-3/8" FS438

    We ship the H.B. Ives FS438 Floor Dome Stop, another product made by Ives that has been around for 50 plus years.  Take a walk around a school made in the 1960's and you will probably find this door stop, or the hole were it used to be.  This Dome Stop is used on doors without thresholds that have a bottom of the door to floor clearance of less than 5/8".  The are constructed of cast aluminum or cast bronze depending on the finish you are looking for.  The rubber stop is non-marring and replaceable.  The stop has a base that is 1-3/4" x 2" oval, an overall height of 1-3/8" and a base height of 9/16".

    Plated Door Finishes

    GJFB14-
    As low as $6.96 As low as $4.90
  33. 4" Kickdown Door Holder FS544

    4" Kickdown Door Holder FS544

    The H.B. Ives FS544 Kick Down Door Holder has been a staple in schools for many years due to its heavy duty construction and inexpensive price.  This is one of our most popular Kickdown Door Holder/Stop for the past 35 years.  It is constructed of durable cast iron, which has great strength characteristics.  The shoe is made of a non-marring rubber, which is replaceable.  The shoe is also held in place with a screw, which makes it a great option in schools and area of high vandalism.  This holder will work on door to floor clearances of 2" or less.  The hole spacing is 7/8" x 1-9/16".

    Made by H.B. Ives

     

    Door Closer Stop Colors

    GJL444-
    As low as $8.86 As low as $7.00
  34. 5" Kickdown Door Holder FS555

    5" Kickdown Door Holder FS555

    The H.B. Ives FS555 Kick Down Door Holder has been a staple in schools for many years due to its heavy duty construction and inexpensive price.  It is constructed of durable cast iron, which has great strength characteristics.  The shoe is made of a non-marring rubber, which is replaceable.  The shoe is also held in place with a screw, which makes it a great option in schools and area of high vandalism.  This holder will work on door to floor clearances of 3" or less.  The hole spacing is 7/8" x 1-9/16".

    Made by H.B. Ives

     

    Door Closer Stop Colors

    GJL555-
    As low as $9.74 As low as $7.80
  35. Roller Bumper Offset RB470

    The Ives Roller Bumper Offset RB470 are ideal if you have situations where doors meet each.   They are constructed cast brass or bronze and are then plated to the desired finish.   The arm projects 5" and the base has a 1-11/16" x 2-1/4".   The device was just like the Glynn-Johnson RB3 or GJRB3.

    Plated Door Finishes

    GJRB3-
    As low as $33.84
  36. Roller Bumper Straight Arm 4" RB471

    The Ives Roller Bumper Straight Arm 4" RB471 are ideal if you have situations where doors meet each.   They are constructed cast brass or bronze and are then plated to the desired finish.   The arm projects 4-1/2" and the base has a 2" diameter.   The device was just like the Glynn-Johnson RB4 or GJRB4.

    Plated Door Finishes

    GJRB4-
    As low as $26.25
View as Grid List

Items 1-36 of 77

per page
Set Descending Direction
Page