Manufacturers
-
Von Duprin 050814 Solenoid Kit for E996
The Von Duprin 050671 and 050814 solenoid have been discontinued. All of our stock is gone. Von Duprin has come out with a retrofit kit to update your E996 Lever to the M996 Lever. The kit changes out the solenoid for a mortorized version, more robust and uses less current. The newer version can be found by searching for M996.
This solenoid is used on the E996 Electrified Lever Trim. The Solenoid body measures 1-3/8” x 9/16” diameter, mounting bracket has a 3/4” on center hole spacing. The wiring harness has a two wire plug. We some times fine the number 991342 on the solenoid.
New for 2024 Von Duprin has come up with a Mechanical Electrified Conversion kit. This kit converts the EL Solenoid to a Mechanical Electrified Trim. More information can be found @ https://www.robertbrooke.com/von-duprin-m996l-retrofit-kit.html
Von Duprin Part # 050814
Von Duprin Part # 050671G050814 -
Von Duprin 33/35/98/99 EL Dogging Rod 4' 050532
Von Duprin 050532 EL Dogging Rod 4'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 4' designates the model it is used on. The 4' model is used on doors 48" down to 36". The Rod measures roughly 17" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices. Use part # G050531 if your door is equal or under 36".
Von Duprin Part # 050532, Old Part # 110008
G050532 -
Von Duprin 33/35/98/99 EL Dogging Rod 3' 050531
Von Duprin 050531 EL Dogging Rod 3'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 3' designates the model it is used on. The 3' model is used on doors 36" or under. The Rod measures roughly 11" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices
Von Duprin Part # 050531, Old Part # 110007
G050531 -
Von Duprin 992/994 Lift Spring 971573
Von Duprin 992/994 Lever Lift Spring 971573
The spring measures 1-5/8" long with a 7/16" diameter. We find two of these springs per 992 and 994 series lever trims. These springs help support the lever handle and return it to the proper position.
Von Duprin Part # 971573-00
G971573 -
Von Duprin NL Drive Screw 090074
Von Duprin NL Drive Screw 090074
The 090074 NL Drive Screw is used on the Von Duprin 22, 98 and 99 Exit Devices to control the rotation of the key cylinder cam. This small set screw, screws into the back of the chassis assembly next to the receptor for the Rim Key Cylinder. The set screw measures 5/16" long by 3/16" diameter. Note: When the NL drive screw is left in back of device, the outside cylinder will function only as a Night Latch. The Night Latch function means the door can only be opened, but not dogged open with the key cylinder.
Von Duprin Part # 090074
Old Von Duprin Part # 970441G090074 -
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
The Von Duprin 99 Push Bar Retrofit Kit-Pbkit updates your current version touch pad, to the newest version. Used on all the Von Duprin 33A, 35A, 99 and 98's. For doors 30" to 36" order the 36" size. If your door is 36" to 48" order the 48" size. The Push Bar is 18" wide on the 36" version. Please allow 1 week for delivery.
Von Duprin part # PBKIT
G99R35 -
Von Duprin 9927 Rod Guide Assembly 112063
The Von Duprin 9927 Rod Guide Assembly 112063 works on all of the Von Duprin 98 and 9927's. The guide keeps the rods from bowing or getting bent by hand carts, or rowdy patrons. Replaces the old style which had the cover and springs.
Von Duprin part # 112063
G99VR35- -
Yale 1500 60-1500-1184 Dogging Shaft
Yale 1500 60-1500-1184 Dogging Shaft
Used on the Yale 1500 Rim and Surface Vertical Rod Devices. This is the peice that the Dogging Key goes in to actuate the Dogging Piece. The Dogging Shaft measures 1-3/8" long and approximately 5/16" diameter. The hex is 5/32"
Yale Part # 60-1500-1184
G6015001184 -
Adams Rite End Cap
On this Adams Rite End Cap we sometimes find the number HX0471 cast into the Black Plastic construction. It measures 2-3/8" high by 1" deep, with a projection of 1-1/4". It is used on the 8099, 8100, 8200, 8300, 8400, 8500, 8600, 8700, 8800 and 8900.
Adams Rite Part # 25-0471-IP
G250471