Search results for: 'rollers for sizing door bars'
- Did you mean
- rollers for sizing door back 0
- rollers for sizing door brass 0
- rollers for spring door bars 0
- roller for sizing door bars 0
- rolls for sizing door bars 0
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 push bar panic exit dog parts 1308
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit dent parts 1306
- door series 30 push bar panic exit deep parts 1310
- door series 30 push bar panic exit detex parts 1307
- door series 30 push bar panic exit drop parts 1307
- door series 30 pull bar panic exit dead parts 1306
- door series 30 pull bar panic exit drop parts 1306
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
The Von Duprin 99 Push Bar Retrofit Kit-Pbkit updates your current version touch pad, to the newest version. Used on all the Von Duprin 33A, 35A, 99 and 98's. For doors 30" to 36" order the 36" size. If your door is 36" to 48" order the 48" size. The Push Bar is 18" wide on the 36" version. Please allow 1 week for delivery.
Von Duprin part # PBKIT
G99R35 -
Roller Bumper Straight Arm 4" RB471
The Ives Roller Bumper Straight Arm 4" RB471 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 4-1/2" and the base has a 2" diameter. The device was just like the Glynn-Johnson RB4 or GJRB4.
GJRB4- -
LCN Sentronic Door Closer Roller - 3034
The LCN Sentronic Door Closer Roller - 3034 is used on all of the LCN Track Closers, and Sentronic Closers. Nylon wheel is 1-1/16" diameter by 3/8" thick. The shaft is has a 1/2" diameter by 1-1/8" long. However in November of 2015 they started shipping the roller with the Slider 168 attached to it, with a retaining ring. LCN Started using this Roller Assembly in December 2018.
LCN part # 4040SE-3034
4040SE-3034 -
Roller Bumper Offset RB470
The Ives Roller Bumper Offset RB470 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 5" and the base has a 1-11/16" x 2-1/4". The device was just like the Glynn-Johnson RB3 or GJRB3.
GJRB3- -
Von Duprin 88 and 55 Cross Bar 967738
The Von Duprin 88 and 55 Cross Bar 967738 has been in use since the 1950's. The bar is 1" in diameter and is 42" long and can be cut down in the field. One side of the bar will be cut for the wedge tite screw opening.
Von Duprin Part # 050004
Old Part # 96773888R120- -
Push Bar Adjustable 451
Push Bar Adjustable 451
Finishes:
US3/605 polished brass
US4/606 brushed brass
US10B/613 dark bronze
US26/625 polished chrome
US26D/626 brushed chromeMaterial: Brass
Material Size 5/8" round tube adjustable to 36"
Base: 5/8" x 5-5/8"
Clearance: 1/2"
Projection: 1-1/8"451- -
Roller Bumper Roller Only
One of the most common issues with Roller Bumpers and Gravity Type Coordinators is that the rubber wheel dries out and eventually falls off. With this Replacement Roller For Roller Bumper, you can now just change out the wheel. The wheel has 15/16" diameter and is 7/16" wide. The hub diameter is 3/16". This package ships with the wheel and a replacement axle that features a "fast rivet" head.
GJRB4R -
Push Bar Adjustable 452
Push Bar Adjustable 452
Finishes:
US26/625 polished chrome
US26D/626 brushed chrome
US3/605 polished brass
US4/606 brushed brass
US5/609 antique brass
US10/612 brushed bronze
US10B/613 dark bronzeMaterial: Brass
Material Size: 5/8" round tube adjustable to 36"
Base: 5/8" x 8-1/2"
Clearance: 1/2"
Projection: 1-1/8"452- -
Push Bar w/Handle 422X26
The Push Bar w/Handle 422X26 is usually found aluminum framed glass store front doors. It is constructed of 1" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish. The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing. The push bar center to center length is determined by you, we can do any reasonable size. Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door. All the fasteners are included, and are determined by the material your door is made of (wood or metal). Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.
422x26 -
Push Bar W/Offset Grip PP-2000
The Push Bar W/Offset Grip PP-2000 is what we usually find on most aluminum framed glass store front doors. This particular set can usually ship within 24 hours, and comes in grip sizes of 9", 10" and 12" centers. The push bar has 33-1/16" centers. It is constructed of 1" solid aluminum that is anodize clear (aluminum) or dark brown. It ships with all of the hardware needed for an 1-3/4" thick door. At this time we are not able to sell the fasteners separately.
PP-2000 -
Ives Roller Bumper Straight Arm 6" RB472
The Ives Roller Bumper Straight Arm 6" RB472 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 6" and the base has a 2" diameter. The device was just like the Glynn-Johnson RB6 or GJRB6.
GJRB6- -
Dor-o-Matic 1990/2090 Cross Bar CBAR
The Dor-o-Matic 1990/2090 Cross Bar CBAR is used on the 990, 1090, 1990 and 2090 Dor-o-Matic and Falcon panic hardware. The bar is 41" and 48" long and is easily cut in the field with a chop or hack saw. The bar is constructed of extruded aluminum and then anodized to the correct finish. The slot where the screw threads in is not threaded, but the screws, sold separately, are thread forming screws. The 41" bars are in stock, the 48" bars have a 3 week lead time
The Dark Bronze Cross Bars are a very dark bronze and will be closer to black.
Doromatic part # CBAR/ 47285197 for the 41" bars, and 47286482 for the 48" bars.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199039 -
Trim Protector Bar
Trim Protector Bar
A great product for applications were your door knobs and levers are getting damaged due to hand carts and other items hitting door trim. Mount this product above or below existing items on walls and doors to protect and sheild them from damage.
Material: Brass, Bronze, Stainless Steel
Material Size: 3/8" x 1-1/2"
Base: 1-3/4" x 3-1/2"
Projection: 3-1/4"GA111- -
Doromatic TD35 Roller Strike
The Falcon TD35 Roller Strike is used with the Dor-o-Matic Falcon 1590, 1790, and 2090 panic device where you are trying to protect the frame when the door closes. The strike has been manufactured since the 1970's. This part is also known as a Kawneer 133479 strike. The strike ships with mounting screws in a painted black finish. This style of strike is also known as a Blade Strike.
Doromatic Falcon Part # TD35 or 4270107393
GTD35 -
Push Bar 1' Diameter 422
The Push Bar 1' Diameter 422 can be used on any door, but is usually found on aluminum framed glass store front doors. They are constructed of 1" diameter solid aluminum, stainless steel, bronze or brass depending on your select finish. The bar has a 2-1/8" projection and 1-1/8" clearance. The push bar ships with thru bolts and finish washer in matching finish. Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.
422 -
Ives RL30 Roller Latch
Ives RL30 Roller Latch
The Ives Roller Latch RL30 is constructed of Forged Brass and Plated to your finish. Furnished with a Nylon Roller. Body measures 1" wide by 3-3/8" high by 1-11/16" deep. The roller has a maximum projection of 3/8" and is easily adjustable.
RL30- -
Ives RL32 Roller Latch
Ives RL32 Roller Latch
The Ives RL32 Roller Latch is constructed of Brass and Plated to your desired finish. The body measures 1-1/8" wide by 2-1/4" high and 2-1/4" deep. The roller is constructed of Nylon, and has an adjustable projection up to 1/2". Fits a standard heavy-duty cylindrical lock cutout.
RL32- -
Push Bar With Offset Grip M422XM39
The Push Bar With Offset Grip M422XM39 is usually found aluminum framed glass store front doors. It is constructed of 1-1/4" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish. The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing. The push bar center to center length is determined by you, we can do any reasonable size. Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door. All the fasteners are included, and are determined by the material your door is made of (wood or metal). Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.
M422xM39 -
Push Bar Adjustable 450
Push Bar Adjustable 450
Finishes:
US3/605 Polished brass
US4/606 Brushed brass
US10B/613 Dark bronze
US26/625 polished chrome
US26D/626 brushed chromeMaterial: Brass
Material Size: 5/8" Rd Tube Adjustable up to 36"
Clearance: 1/2"
Projection: 1-1/8"
Fasteners: Surface Mount only450- -
Push Bar W/Offset Grip 422X39
The Push Bar W/Offset Grip 422X39 is usually found aluminum framed glass store front doors. It is constructed of 1" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish. The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing. The push bar center to center length is determined by you, we can do any reasonable size. Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door. All the fasteners are included, and are determined by the material your door is made of (wood or metal). Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.
422X39 -
LCN Sentronic Door Closer 3130SE
The LCN Sentronic Overhead Concealed Door Closer 3130SE is shipped with a standard arm, 24V or 120V SE track (please specify), track roller, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Interfaces with fire alarm systems.
LCN Sentronic Door Closer 3130SE parts are also available.
3130SE -
Ives RLPART.1025 Roller and Rivet for RL30/RL1152
Ives RLPART.1025 Roller and Rivet for RL30/RL1152
This replacement Nylon Roller and Rivet Package is for the Ives RL30 and RL1152 Roller Latches. The Roller measures 3/4" high by 5/8" diameter. The Rivet measures 1-1/16" long and is threaded on one side.
Ives Part # RLPART.1025
RL30NR -
LCN Door Closer 2031 -2035
The concealed LCN Door Closer 2031 -2035 Pacer® is a heavy duty closer designed to fit in a narrow, minimum 1 3/4” aluminum transom. It is considered an application specific closer, due to the cylinder spring sizing and handing. The standard 2030 series closer shipped with standard arm, standard track, mounting/finish plate, and wood and machine screw pack. Aluminum frame requires minimum 1 3/4” x 4” tube.
2030