Search results for: 'rollers for spring door brush'
- Did you mean
- rollers for spring door brass 0
- roller for spring door brush 0
- Related search terms
- door series 30 push bar panic exit dev parts 1306
- door series 30 push bar panic exit dor parts 1311
- door series 30 push bar panic exit dog parts 1308
- door series push bar panic exit dor cal parts 1308
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit deep parts 1310
- door series 30 push bar panic exit detex parts 1307
- door series 30 push bar panic exit drop parts 1307
- door series 30 pull bar panic exit dead parts 1306
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Magnetic Door Stop/Holder
Magnet Door Stop
Hands-free magnetic door stop/holder. All you need to do is open the door and a strong maget will keep it open until you close it. Mounts horizontally or vertically. Includes fasteners plus 1 concrete and 3 hollow wall anchors.
Not for use on doors with spring hinges or door closers.
GDS100 -
LCN Sentronic Door Closer 4040SE-168 Slider
The LCN Sentronic Door Closer 4040SE-168 Slider used to be just the slider, the metal part. In October of 2015 they changed the part so the roller is now included and they are held together by a snap ring or E-clip.
The slider is not longer sold separately, it is sold with the roller. You have to take the Assembly apart to get just the slider.
4040SE-168 -
4" Kickdown Door Holder FS452
4" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 4" model is for door to floor clearances of 2" or less. The hole spacing is 19/32" x 1-47/64".
Ives Part # FS452
GJ452-4- -
Door Sweep 1-9/16" Long Brush
The Door Sweep 1-9/16" Long Brush is one of the longest brush sweeps we offer. The brush is 1-9/16" long, with the mounting strip being 1-3/16". The mounting strip is constructed of extruded aluminum, and the holes are slotted for adjustment. The mounting screws, which are #6 x 3/4" stainless steel sheet metal screws are included. This product is easily cut down in the field.
E609A -
Corbin Russwin 651F61 Red Lever Spring
The Corbin Russwin 651F61 Red Lever Spring is the same part as the Yale Lever Trim Spring. Used on Yale and Corbin Russwin LHR or RH Doors on there outside trim Lever Handles. The spring has an 1-1/4" OD and 1-1/8" ID.
Yale Part # 60-7000-1225-999
Corbin Russwin # 651F61G651F61 -
5" Kickdown Door Stop FS452 | Ives FS452 Kick Down Door Holder
5" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 5" model is for door to floor clearances of 3" or less. The hole spacing is 19/32" by 1-47/64".
Ives Part # FS452
GJ452-5- -
Wall Door Stop / Holder WS40
The Ives Wall Door Stop / Holder WS40 is a door holder that has some history. We see this product in many schools, hospitals and churches that were built in the 50's, 60's and 70's. The WS40 was originally made and designed by Glynn-Johnson out of Chicago, Illinois, and was called the W40 or GJW40. H.B. Ives purchased Glynn-Johnson in 1990's and mergered this product into there offering, and changed the part # to WS40. The holder is made of cast brass or bronze and plated to your desired finish. The holding mechanism has a rubber bumper inside it to act as a door stop, and a brass spring loaded roller to act as a holder. The product ships with a universal screw package to mount on all types of walls. For the best results with this stop/holder the door and wall should be about 3-1/2" apart in the open position.
Base Height: 2"
Base Width: 2-1/2"
Base Projection: 2-1/4"
Engaged Projection: 3-1/2"
Strike Height: 2-1/16"
Strike Width: 3/4"
Strike Projection: 2"GJW40- -
Full Mortise Double Swinging Spring Hinge
Full Mortise Double Swinging Spring Hinge
Used mainly for commercial kitchen doors, or any commercial double swinging door. Sold in sets of 2 hinges, they will handle doors up to 75 lbs that are 1-3/4" thick. If you door weighs between 75 and 107 lbs, you should use 3 hinges. The door flange is designed for a standard 4-1/2" x 4-1/2" template mortise. Hinges ship with wood and metal mounting screws. They come in a standard Painted Primed Finish Gray.
The jamb flange is .100" thick, the door flange is .134" thick and the barrel diameter is 1.18".
GDA8145 -
Brushed Bronze Door Kick Plate
The Brushed Bronze Door Kick Plates are solid bronze plates that are finished in a Satin or Brushed finish and then clear coated. The Bronze Kick Plates are similar to the Brass Kick Plates, but they have more of an orange hue, were as the brass plates have a yellow hue. This was a very popular finish in the 1950's, 60's and early 70's. Custom sizes are available starting around $0.49 per square inch depending quantity. Kick Plates come pre drilled with screws. Please allow 2 week shipping time.
GKP-US10 -
Floor Door Stop 524
Floor Door Stop 524
The 524 Door Stop is one of the more interesting door stops we have. They are constructed of cast brass that is then plated to your finish. It measures 1-1/4" in diameter and is 1-1/2" tall. One of the benefits of this door stop is there are no exposed screws. The 524 ships with a 12-24 x 1" machine screw, a plastic anchor and a lead anchor.
GJ524- -
Dor-o-Matic 2090 Latch Spring PB61
Doromatic 2090 Latchbolt spring. Pushes out the latch bolt.
Doromatic part # SPRING.104
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209060 -
Brushed Stainless Steel Door Kick Plate 18 Gauge .037
The Brushed Stainless Steel Door Kick Plate 18 Gauge .037 is the lightest duty stainless steel plate we offer . Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there. This plate is ideal as a replacement for Brushed Chrome kick plates. Brushed Chrome Kick Plates are usually a bronze plate that is chrome plated. The problem with bronze is it is a soft metal and dents easily. The stainless steel plates are a lot harder and more resistant to dents. Brushed chrome looks identical to brushed stainless steel. We only use type 304 stainless.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.22 per square inch depending quantity
Please allow 1 week shipping time
GKP-ss-18ga -
Brushed Stainless Steel Door Kick Plate-14 Gauge .062
The Brushed Stainless Steel Door Kick Plate 14 Gauge .062 is the heaviest duty plate we offer . Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there. We use only type 304 stainless.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.40 per square inch depending quantity
Please allow 1 week shipping time
GKP-US32D-14ga -
Brushed Brass Door Kick Plate
The Brushed Brass Door Kick Plates are the same as the Lifetime Polished Brass Door Kick Plates, solid stainless steel base metal, 16 gauge (.050" thick), but the surface is Satin or Brushed. Because it is an artifical finish they will not tarnish. Custom sizes available starting around $0.41 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP-BB -
Dor-o-Matic 1990/2090 Spring Retainer SD45
Dor-o-Matic spring retainer. The retainer fits under the housing, by the dog screw and holds one end of the spring. The spring pin holds the other side.
Doromatic part # RETAIN.102
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199045 -
Von Duprin 090091 and 090092 Lever Control Springs Pkg 4
The Von Duprin 373L Lever Control Spring 090091 and 090092 are used on the 371, 373, 375 and 378 Lever Handles. The spring is used to return the lever to the horizontal position. Sold in packages of 4 springs.
Von Duprin Part #
090091 Left Hand Reverse
090092 Right Hand ReverseG09009x -
Brushed Brass Door Kick Plate-6 x 28 inches
Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated
Custom sizes available starting around $0.25 per square inch depending quantityKick Plate comes with screws for mounting
Please allow 1 week shipping time
GKP628-US4 -
Brushed Brass Door Kick Plate-6 x 34 inches
Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated
Custom sizes available starting around $0.25 per square inch depending quantityKick Plate comes with screws for mounting
Please allow 1 week shipping time
GKP634-US4 -
Von Duprin 55 Hinge Case Spring 090052
The Von Duprin 55 Hinge Case Spring 090052 is the spring in the inactive case. This spring does all of the lifting of the cross bar, and is used on the 55 Rim, 5547 Concealed Vertical Rod and 5575 Mortise Device. It measures 1-5/8" long by 5/8" diameter.
Von Duprin part # 090052
55R200 -
Von Duprin 55 Rim Latch Bolt Spring 967502
The Von Duprin 55 Rim Latch Bolt Spring 967502 is only used on the 55 Rim Panic Hardware. This spring just keeps pressure on the latch bolt, it does not lift the arm. If your arm is sagging, they you need to tighten the crossbar wedge tite screws and check and make sure the 55R200 55 Hinge Case Spring is not broken. It measures 1-1/2" long by 3/8" diameter.
Von Duprin part # 050354
Old Part # 96750255R210 -
Floor Door Stop / Holder 536
Floor Door Stop / Holder 536
The Stop and Holder 536 is considered a manual door holder. It is a manual door holder because you have to physically bend over and hook and unhook the holder. This holder is constructed cast brass or cast bronze and then plated to your desired finish. The stop measures 2-1/2" in diameter and 3-7/8" overall height, with a center line height of 2-1/2" from the base to the center of the rubber stop. It ships with all of the fasteners.
GJ536-