Search results for: 'fire door locking parts von dark'
-
Dor-o-Matic 1690 Hex Soc Set Screw PB317
Dor-o-Matic 1690 Hex Socket Set Screw-PB317
1/4-20 x 3/8"
Doromatic part # SCREW.1067 or PB317
Dor-o-Matic 1690 Repair Parts Breakdown
GPB317 -
Dor-o-Matic EL1590 Rim Panic Device
Effective December 20, 2024 the EL1590 has been discontinued. Falcon Doromatic is working on retro-fit plates to work with the MEL1690.
Dor-o-Matic/Falcon EL1590 Panic Device with Electric Latch Retraction
The Dor-o-matic 1590 is our heaviest device and offers a clean appearance with push pad styling and a variety of practical features. The Dor-o-matic 1590 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Requires a Power Supply
Replacement parts are also available
Shipped with all screws and strikes.
EL1590EO- -
Dor-o-Matic 2090 Latch Spring PB61
Doromatic 2090 Latchbolt spring. Pushes out the latch bolt.
Doromatic part # SPRING.104
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209060 -
Dor-o-Matic 1990 and 2090 Set Screw PB38
The Dor-o-Matic 1990 and 2090 Set Screw PB38. This set screw goes in the housing to secure it on the mounting studs. There is 3 of these screws on each housing, two on the left and right side toward the top, and one on the bottom. The manufacture is now Falcon.
Doromatic part # SCREW.1039 PB38
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199038 -
Dor-o-Matic 1690 Actuator Arm Brkt Assembly PB338
The Dor-o-Matic Falcon Actuator Arm Bracket Assembly is used on the 1690 and 2390 devices.
Doromatic part # BRKTASY.107 or PB338
Dor-o-Matic 1690 Repair Parts Breakdown
GPB338 -
Dor-o-Matic 1790 NL/HB Cylinder Assembly Slider PB344
Dor-o-Matic 1790 Slider. This is one on the components used in the NL/HB Cylinder Assy
Doromatic part # SLIDER.101 or PB344
Dor-o-Matic 1790 Repair Parts Breakdown
GPB344 -
Dor-o-Matic 2090 Backplate Assembly PB89
The Dor-o-Matic 2090 Backplate Assembly PB89 has been around since the early 1970's. It is now called the Falcon 2090 Back Plate Sub Assembly, but it is the same thing, just different owners of the company. This piece includes the plate casting, latch bolt, pinion gear, and retractor.
Doromatic Part # 4270902974 Right Hand
Doromatic Part # 4270902968 Left HandLEFT HAND BACKPLATE SHOWN
G209090 -
Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Replacement Latch Bolt Assembly for the Falcon Dor-o-matic 1590. In the old days you could just replace the PB355 (SPRING.127) spring, but as of November 2015 you have to replace the complete latch head assembly.
Doromatic Part # 4270107603
Old Part # PB124GPB124 -
Doromatic 1390 Dogging Kit PB-96
Dor-o-Matic 1390 Dogging Assembly. If you have a 1390 and the dogging is stripped, this is the part you need. The package includes the Dogging Cam (4270102815), Activating Cam (4270106551), Spacer (4270108584), and Retaining Ring (4299100732). The 1390 was discontinued in about 2003. Also known as a PB-96 Dor-o-Matic 1390 Dogging Assembly
Doromatic part # 4270106669
G4270106669 -
Dor-o-Matic 1590 159CA-NL Cylinder Assembly
No longer available
Doromatic 1590 Cylinder Assembly 159CA-NL
Doromatic part # 159CA-NL
159CA-NL -
Dor-o-matic 1490 149CA-HB Cylinder Assembly
No longer available, we do have some of the GPB116 Cam Assemblies left.
Doromatic 1490 Cylinder Assembly 149CA-HB
Doromatic part # 149CA-HB
149CA-HB -
Dor-o-Matic 1690/1990 Retractor PB35
The Dor-o-Matic 1690/1990 Retractor PB35 has been used since the 1970's. The manufacture has changed names in the last 5 years and now goes by Falcon Panic Hardware. This piece is used the 990, 1690 and 1990 devices. The pinion rides inside this bracket to raise and lower the internal rods. Parts used with the retractor are the Pinion (G199005), Traveller (G199028) and the Pinion Bushing (G199046). Retractor measures 1-7/8" long by 7/8" wide by 1/4" thick.
Doromatic part # PB35 or RETRACT.101
G199035 -
Dor-o-Matic 1490 RHR/1590 LHR Push Label PB212 PB214
Dor-o-Matic 1490 RHR/1590 LHR Push Label
4-7/8" x 1-7/16"Doromatic part # 4270107321 or PB212 Black-No longer available
Doromatic part # 4270107320 or PB214 GoldGPB212- -
Dor-o-Matic 1490 LHR/1590 RHR Push Label PB213 PB215
Dor-o-Matic 1490 LHR/ 1590 RHR Push Label
1-7/16" x 4-7/8"Doromatic part # 4270107323 or PB213 Black-No longer available
Doromatic part # 4270107322 or PB215 GoldGPB213- -
Dor-o-Matic 1490 149CA-NL Cylinder Assembly
No longer manufactured. We do have some of the PB115, which is the die cast disc that has the receiver for the rim cylinder and the plastic nub.
Dor-O-Matic 1490 Cylinder Assembly 149CA-NL
Doromatic part # 149CA-NL or 4270107272
149CA-NL -
Dor-o-Matic 1590 NL Cam Assembly PB117
Dor-o-Matic 1590 NL Cam Assembly
Doromatic part # 4270107283
No longer Manufactured
GPB117 -
Falcon Dor-O-Matic STK45 Surface Strike
Falcon Dor-O-Matic STK45 Surface Strike
This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.
US19-Black finish
STK45