Search results for: 'goods push'
-
Von Duprin Panic Device 880TP Trim
The Von Duprin Panic Device 880TP Trim is for the 88 series only. The stanchions welded on the back line up with the 88 device on the interior. The optional key cylinder locks and unlocks the thumb piece. The plate measures 3" wide by 14-3/16" long with an 1-5/8" bore hole for cylinder.
Von Duprin part # 880TP-R
88TP- -
Jackson Panic Device Mounting Stud 1085/1095
The Jackson Panic Device Mounting Stud is for use on the 1085 and 1095 panic hardware. Each door would have 2 on the left and 2 on the right, so a total of 4 studs per door. The housings fit over these studs and are held in place by an 1/8" set screw, there are two of these set screws at the top and one on the bottom. The threaded part has a 1/4-20 thread.G108544 -
Floor Door Stop Dome 1" Height 522
Floor Door Stop Dome 1" Height 522
This contemporary looking Dome Stop has been a hot selling in the last few years. The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish. At this time, only brushed or satin chrome is available. The base is 1-11/16" wide by 4" long and 1" tall. The base is 5/16" thick. This door stop ships with wood and machine screws and all of the anchors.
GJ522 -
Yale 2300 Door Closer-Discontinued
Yale 2300 Door Closer
- Spring size 2, 3, 4, 5
- Separate and independent valve for sweep speed and latch speed
- Adjustable backcheck standard
- Regular, top jamb, parallel mount
- 5-year limited warranty
- ANSI/BHMA A156.4 Grade 3
3/4" x 9-1/16" hole spacing
In April of 2023 Norton Yale have discontinued the 2300 and 9300. The Norton 1600 will be sent in place of the 2300. Same Hole Spacing, but adjustable spring tension.
2300- -
Norton Traditional Door Closer 78 B/D
The Norton Traditional Door Closer 78 B/D is a door closer used in historic buildings. This is a replica of the original cast iron door closer used from the 1920’s to 1960’s. The new version is made of a cast aluminum alloy material, and should only be used when you are trying to keep historic designations. The hole spacing on this closer is 1-3/8" x 4-1/4”.
78B/D -
Von Duprin 990DT Trim
The Von Duprin 990DT Trim is known as a Dummy Trim. This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building. If you have a different manufacture or a different Von Duprin series on the interior, it will not line up. On the back of this plate we usually find the number 990 stamped on it. The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices. If you have a Mortise or Concealed Vertical Rod, call us and we will order that model. The plate measures 3" wide by 14-3/16" tall. Order here for the 990DT-R&V.
99DT- -
Von Duprin 99 Cover Plate 050114
The Von Duprin 99 Cover Plate 050114 is for use on the 33A, 35A, 98 and 99 devices. Covers the dogging assembly on the hinge side of the door. The usually fall off when the End Cap is not on the exit device. Von Duprin is only shipping a 20-1/2" cover plate now, which will work on 3' and 4' doors, you will have to cut more off if you have a 3' device with a hack saw or chop saw.
Von Duprin Part # 050114 and 050117 Hex Key Dog Conversion Kit
Von Duprin 99 Cover Plate 050114
G99R50 -
LCN Door Closer Cover
The LCN Door Closer Cover is the standard plastic cover that ships with LCN Door Closers. Specify your current closers model number when ordering. Not all of the LCN closers have the same shape cover on the door closer cylinder. The part number is the Series Number followed by -72. So, the part number would be 1460-72, 4010-72, 4020-742, 4030-72, 4040-72 and 4110-72. We have access to all the covers, if yours is not here call us and we will quote you a price.
4XXX-72 -
Floor Door Stop 524
Floor Door Stop 524
The 524 Door Stop is one of the more interesting door stops we have. They are constructed of cast brass that is then plated to your finish. It measures 1-1/4" in diameter and is 1-1/2" tall. One of the benefits of this door stop is there are no exposed screws. The 524 ships with a 12-24 x 1" machine screw, a plastic anchor and a lead anchor.
GJ524- -
Handicap Saddle Threshold 413 - 4" Wide By 1/4" High
Saddle Threshold 413 - 4" Wide By 1/4" High
Extruded aluminum construction. The thresholds are shipped with mounting screws (#10 x 1-1/2" FH zinc plated wood screws), Milled aluminum finish. This is considered a Handicap Saddle Threshold.
Other sizes and finishes are available, call for more information.
Air shipment is not available on this product. Please allow 7-10 days for delivery.
413- -
LCN Door Closer 4041XP-CUSH
The LCN Door Closer 4041XP-CUSH is the same cylinder as the 4040XP, but with a CUSH arm (4040XP-3077CNS). This closer can only be mounted in the parallel arm configuration. With this closer you get the XP heavy duty cylinder with the heavy duty CUSH arm.
We ship the 4041XP-CUSH
4040CUSH- -
Command Access MLRK1-FAL17 Motorized Latch Retraction
The Command Access MLRK1-FAL17 Motorized Latch Retraction Kit With REX is for use on the Falcon Dor-o-matic 1690/1790, AHT4/5, and First Choice 3600/3700 Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires. The package includes: 1) Motor Mount with MM5; (1) 50944 Molex Pigtail; (1) 50030 6 Feet Lead with VD Connector; (2) 40124 10-24 x 3/8inch Phillips Screws (Silver); (2) 40125 10-24 x 3/8inch Phillips Screws (Black).
The MLRK1-FAL17 is a cost-effective and straightforward way to upgrade your Falcon 1690/1790, First Choice 3600/3700, & AHT 4/5 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty
MLRK1-FAL17 -
Door Pull Handle 23
The Door Pull Handle 23 features two closed ends. This Door Pull is also known as a Door Handle or Door Grip. The dimensions are 14" overall length, 8" centers, with a 3/8" by 1-1/4" handle cross section. The mounting post has a 1" diameter, and the handle projects out 1-7/8". The handle ships with thru bolts and finish washers. It is constructed of aluminum, stainless steel or brass depending on the finish you are looking for.
GHE23- -
Jackson Panic Device 1095 Active Housing
The Jackson Panic Device 1095 Active Housing is the working side of the 1095 panic hardware. The housing comes will all the internal parts, including the latch bolt. The distance between the mounting studs on this case is 6-5/16". Jackson part # 30-988 Right Hand Body, and part # 30-989 Left Hand Body
Left Hand Housing shown in the aluminum finish.
G1095xx -
Jackson 30-2674 1285/1295 Cover Package
Jackson 30-2674 1285/1295 Cover Package
Jackson part # 30-2674-313 and 30-2674-628 Cover Plate for use on the 1285 and 1295 devices.. Plates measure 2-11/16" x 7-1/2 and 2-11/16" x 2-1/8", two plates in each package.
Jackson Part #'s 30-2674-313 and 30-2674-612
G302674- -
Falcon OHC100 and OHC101 Door Closer Body Only
The Falcon OHC100 and OHC101 Door Closer Body Only are designed for a wide variety of Doors. The OHC100 is for use on larger exterior doors and has spring size adjustments of 3-5. The OHC101 is designed for smaller or interior vestibule doors, with an adjustable spring size of 1-3.
OHC100- -
Detex Advantex 40 Series Narrow Stile Rim
The Detex 40 Series rim exit device is a supper heavy duty panic device for use on narrow stile doors. Device features an angled end cap to deflect damage away from the unit. This device is designed for years of trouble free service in high use, high abuse enviroments.
G40REO- -
Wall Door Stop WS443
The Ives Wall Door Stop WS443 has been a staple of the Ives product line for at least the last 45 years. The stop features cast brass construction and then plated the the desired finish, which makes it ideal for interior or exterior use. The rubber tip is a non marring rubber, that can be replaced and we keep in stock. The stop has a 2-1/4" base diameter and a 3-11/16" projection from the wall. This product ships with an expansion shield and lead shield.
RB443HD- -
LCN Door Closer Regular Arm 3077
The LCN Door Closer Regular Arm 3077 ships with 95 percent of there door closers. This is the standard regular. Specify your current closers model number when ordering. Not all of the LCN closers have the same shape spindle on the door closer cylinder. The fitting for the 4040 is a six sided, the 4010, 4020 and 4110 have a flat sided oval, and the 1260 and 1460 have an eight sided star. The LCN Part #'s on this Regular Arm is: 1260-3077, 1460-3077, 4010-3077, 4020-3077, and 4040-3077. If your model is not here, call us and we will quote you a price.
3077 -
Command Access MLRK-VD Motorized Latch Retraction
The Command Access MLRK-VD Motorized Latch Retraction is for use on the 33,35, 98 or 99 Von Duprin Exit Devices. This motor is 24 to 28 volts and has a Standard : 900 mA (Avg Current Peak); 215 mA (Avg Current Hold). This unit requires 18 ga wire. And ships with (1) Motor Mount with MM5; (2) 40002 - 8/32 x 1/4 inch Phillips Head Screw; (1) 50030 8/Lead with vd Connector; (1) 50944 Molex Pigtail; (1) 40144 Dogging Hole Cap; (1) 50991 Fire Rated Drilling Template; (1) Replacement Dogging Tail Piece.
The MLRK1-VD is a cost-effective and straightforward way to upgrade your Von Duprin 33/35 & 98/99 series device to motor-driven latch retraction in the field. For AX devices, see the MLRK1-VDAX listed on the cutsheet below. UL Listed + 3 Year Warranty
MLRK1-VD -
Von Duprin Panic Device 210NL Trim
The Von Duprin Panic Device 210NL Trim is part of there economy series trims. This trim iis a pull with a key cylinder hole, it will line up with the chassis mounting holes of the 22 and 2227 devices. The key locks and unlocks the exit device. The plate measures 5-3/8" x 4-25/32" x 3/32", with a projection of 1-31/32".
220NL -
Von Duprin Strike 385A
The Von Duprin Strike 385A is used on the floor for the Von Duprin 2227, 8827, 9827 and 9927 Surface Vertical Rods. Von Duprin recommends this strike if you are mounting the bottom strike in wood. The strike face plate outside dimensions are 2-1/4" x 2-1/4" with an inside dimension of 1-1/8" by 1". This floor strike features a bolt that can be cemented into the floor. This is an optional strike when added security is needed. Zinc plated finish.
385A -
Von Duprin 22 End Cap Only 968601
The Von Duprin 22 End Cap Only 968601 is the end cap that goes on the hinge side of the door. When the cap breaks off the Dogging Cover Plate just slides off. Works on all of the Von Duprin 22 exit devices. If you need the bracket also, please order part # G22R10. Black plastic construction. As of October 1, 2014, Von Duprin no longer sells just the Plastic Cap Only. The complete End Cap and Bracket 900981 will be shipped in its place.
Von Duprin Part # 968601
G22R25 -
Corbin Russwin Hold Open Arm Parallel Bracket
The Corbin Russwin Hold Open Arm Parallel Bracket is the standard bracket shipped with the Hold Open Arm. This replacement bracket will work on the older Corbin 100, 110, and 120's, and the Russwin 2800, 2810 and 2820's. Along with the DC3210 and DC6210 Door Closers. This bracket used by the hold open arm for parallel arm applications only. Corbin Russwin part # 509F49.
2800HPA -
Floor Door Stop Dome 1-1/4" Height 523
Floor Door Stop Dome 1-1/4" Height 523
This contemporary looking Dome Stop has been a hot selling in the last few years. The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish. At this time, only brushed or satin chrome is available. The base is 1-11/16" wide by 4" long and 1-1/4" tall. The base is 1/2" thick. This door stop ships with wood and machine screws and all of the anchors.
GJ523 -
Dorma 8616 Door Closer
Dorma 8616 Door Closer
The Dorma 8616 door closer series is a non-handed surface applied door closer with adjustable spring power and back check positioning adjustment. It provides the flexibility needed to meet the many demands of commercial and institutional applications, including ADA barrier-free accessibility requirements.
Door closer certified for ANSI Grade 1.
we ship the Dorma Model # 8616-AF89P
3/4" x 12" hole spacing
8616- -
TH1100-HK1 Deluxe Hinge Kit
The TH1100-HK1 is the perfect solution for existing hinges that have failed, and is a quick and easy fix for compromised door openings. Deluxe Hinge Kit TH1100-HK1 comes in a package of two hinges, 2 1/4" shims, and 12 one-way mounting screws. The hinges are non handed, will work on Flush, and 1/8" offset door applications, have a self lubricating pin that rotates on anti-friction bearings, and have a vertical adjustment screw. They are constructed of an aluminum alloy.
TH1100HK1- -
Cal Royal GLS7700 Narrow Stile Rim Device
The Cal Royal GLS7700 Rim Device is for use on Aluminum Framed Glass Doors when the Stile width is 1-3/4 inch or more. The exit device ships with wood and machine screws, along with the Strike plate. The stainless steel latch bolt has a 3/4 inch throw. This device is a Grade 1, which is the heaviest duty rating.
GLS7700- -
Von Duprin 88 Lever Arm Right Hand 050438
The Von Duprin 88 Lever Arm Right Hand 050438 replacement lever arm for all the Von Duprin 88 exit devices. Usually replaced due to the dogging screw stripping out. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.
Von Dupin part # 050439
Old Part # 10072988R80-