Search results for: 'bathroom strike door position parts'
-
BB84 Half Surface 4-1/2" Door Hinge-Box of 3
The BB84 Half Surface 4-1/2” Door Hinge is a specialty hinge. The hinge leaf will mount on the door frame in the standard mortise position and the other leaf mounts on the door face. These are five knuckle, two bearing with square edges. They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish. We ship in boxes of 3 hinges with the wood and machine screw.
G70045- -
LCN Door Closer 4111 HEDA Hold Open
The LCN Door Closer 4111 HEDA Hold Open is known as the Smoothee, and is one of the heaviest duty door closers made, the HEDA stands for Hold Open Extra Duty Arm. If you have a building were you have a high traffic and abusive, especially exterior doors, then this is the closer. The 4111 is an application specific closer, meaning it will only work when mounted on the door, on the push side. This is known as a parallel arm application. The cylinder is fully adjustable and will work on doors up to 56" exterior door, and can be adjust down to ADA required levels. We ship the 4111 HEDA model, which is a hold open arm on this page. The cylinder mounting holes are 2-1/2" by 6".
4110H- -
Von Duprin Dogging Hook 090044
The Von Duprin Dogging Hook 090044 is the piece that grabs the push bar mechanism and keeps it in the dogged position. The does wear out, but it takes a long time. This piece is used on the 22, 33A, 35A, 98 and 99 series devices made after 1997. We sell this part individually and it is #5 on the diagram.
G090044 -
International Door Closer 5001P Series Adjustable Spring Power
The International Door Closer 5001P Series Adjustable Spring Power is a great closer to use as a replacement for the many 3/4" by 12" mounting holed closers. This door closer is fully adjustable with sweep, latching and back check adjustments, a long with an adjustable spring tensoin control. This closer can be adjusted to less then 8-1/2" pounds of resistance to meet ADA standards. You can install this closer on the push, pull or top jamb, we ship the regular arm and a parallel arm bracket. This closer has the same mounting holes as the Norton 8000 and Yale 3000 door closers.
Hole spacing 3/4" x 12"
5001- -
Monarch / Falcon 24-R Series Rim Exit Device
Monarch / Falcon 24-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
- Hand: Non-handed.
- Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN. - Strikes: 299 strike standard.
- Latchbolt: Stainless steel, 3⁄4" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
- Projection: 2-3⁄4" maximum, 2” dogged.
- Mounting Height: 40-1⁄4" from CL to finished floor.
- Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard. - ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
- Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.
Call for pricing on non listed finishes
2 week lead time24EO-- -
Doromatic 1990 Panic Device
The Doromatic 1990 Panic Device has a long history of reliable performance. Although it is now called the Falcon 1990, they are the same device. This device is non handed, meaning it can go on left hand or right hand door. The standard included 41" crossbar will work on doors up 3'8" wide, and the stardard rods will work on a 7' door. It is equipped with hardened steel latches and adjustable strike to ensure safety, security and quiet operation. The package includes all of the mounting screws and strikes.
Hand: Field reversible, non handed.
Dogging Feature: Hex dogging standard.
Cylinder: Rim, key entry (NL) or hold back (HB) available
(field selectable)
Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7'
door, extra length cross bar available.
Doors: 1-3/4" thick metal doors.
Projections: 4-3/8" extended, 2-1/2" depressed.
Stile: 1-3/4" minimum.G1990EO -
Pivot Set TH1110 Arch/Vista Wall
TH1110 Arch/Vista Wall Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic
TH1110 -
Dorma 8900 Door Closer Series
The heavy-duty 8900 Series non-handed surface applied closer
with adjustable spring power and backcheck positioning adjustment.
The 8900 has intensity adjustable hydraulic backcheck
that will take effect at approximately 65º. The 8900 has two
independent, noncritical adjustment valves to control sweep and
latch closing speeds. The backcheck positioning valve maintains
an effective backcheck range on parallel arm applications. The
8916 will be available with field adjustable spring power from size
1 to 6 for barrier-free requirements.2-1/8" x 5" hole spacing
8900- -
Monarch / Falcon 25-R Series Rim Panic Device | Panic Hardware
Monarch / Falcon 25-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2" dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time25EO- -
Ives 7212 Pivot Set
• Handed
• Top, header mount
• Bottom, jamb mount
• Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
• Maximum door load 200 pounds
• Vertical adjustment range 3/16", with positive locking7212 -
Von Duprin Aluminum Mullion 7'2" | Von Duprin 5654
The Von Duprin 5654 Aluminum Mullion 7'2" comes prepped for two of the 299 strikes. The removable mullion also ships with the 154 Mullion Stabilizers. Mullions are 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-1/8" with a wall thickness of 1/8 ́ ́. The 5654 is constructed of aluminum. Everything is included, except the the 299 strikes. The taller ones are also available, please call for pricing.
G5654- -
Global Door Controls TC201 Door Closer
The Global Door Closer TC200 is recommended for use on all aluminum store front doors, wood or hollow metal commercial applications. It is a versatile utility closer that provides narrow styling and has a full selection of accessories to accomodate the requirement of any field installation.
In this series, our Global Door Closer TC201 is a multi-size spring model that offers adjustable power with a choice of range sizes 2-5 where high rates of closing force are required. Our TC201ADA model also offers adjustable spring power sizes 1-4 for use on interior doors requireing less than 5 lbs. of opening force and exterior doors requiring less than 8.5 lbs. This complies with ADA handicap codes and ANSI/BHMA standard requirements. Both models will retrofit most full size closers with a 9 1/16" industry standard hole patten to update any opening for code compliance.
Hole Spacing is 3/4" x 9-1/16"
Options: Specify when ordering:
- Finish - AL, DU
- Size 1-4 or 3-6
TC201-- -
Dorma 8616 Door Closer
Dorma 8616 Door Closer
The Dorma 8616 door closer series is a non-handed surface applied door closer with adjustable spring power and back check positioning adjustment. It provides the flexibility needed to meet the many demands of commercial and institutional applications, including ADA barrier-free accessibility requirements.
Door closer certified for ANSI Grade 1.
we ship the Dorma Model # 8616-AF89P
3/4" x 12" hole spacing
8616- -
Glynn-Johnson Overhead Door Holder/Stop 410 Series Concealed Mounting
The Glynn-Johnson 410 Series Overhead Door Holder/Stop Concealed Mounting is the perfect combination of form and function, Glynn-Johnson 410 series holders and stops offer effective door control and a low-profile design. Each model is constructed so that the channel is encased in the door and the jamb bracket is mortised in the frame. When the door is open, the arm and jamb bracket are visible. Conversely, when the door is in the closed position, the entire holder is completely concealed.
The 410 fits in a mortised channel on top of the door, if your doors are not mortised on the top of the door, you would have to mortise them out. Replaces the older version GJ310, GJ320 and GJ330 series.
GJ410 -
Russwin Door Closer 2800/2810/2820
The Russwin 2800, 2810 and 2820 are no longer available. They have been replaced by the Corbin Russwin DC6210, which has the same hole spacings and arm. You will not have to redrill or modify your door to make the DC6210 work in place of your existing 2800, 2810 or 2820 door closers. The Corbin Russwin DC6210 has a little bit larger body due to the increased functionality of this closer. This new closer will meet all the ADA requirements.
Corbin Russwin’s history combines high-quality product and innovative design. That tradition continues with the new Grade 1 DC6000 Series door closer, designed and engineered with quality features such as captured valves and a complete range of new arms. The DC6000 series is the perfect closer for high-use openings or openings that must meet ADA requirements, such as schools, office buildings, health care facilities, and retail complexes. The series also meets UL and UL10C positive pressure requirements for fire openings.
Uses the same mounting bracket as the 100, and 2800 series.Older models may have SL72 or MS93 cast on the cylinders. You may also find Clarksdale, MS cast on the cylinder also.
DC6210a -
International Door Closer 9001-TP Series
The International Door Closer 9001-TP Series is a relatively newer closer. This closer features fully adjustable spring tension, closing and latching speeds and back check. The narrow design allows for mounting on the top jamb of store front doors without a drop plate. The closer is non handed, and can be mounted on the push, pull or top jamb positions. It meets all ADA requirements and is a Grade 1 closer, the heaviest rating possible.
3/4" X 11-3/32" Hole Spacing
9001P- -
Pivot Set TH1114KM Pitco Style
TH1114KM Pitco Style Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic
TH1114KM -
Wall Door Stop / Holder WS20
The Ives Wall Door Stop / Holder WS20 is another door holder from Glynn-Johnson. The Chicago based manufacture made these for 40 plus years. When they were purchased from H.B Ives and merged into there line they became the WS20. This holder is constructed of cast brass and then plated to your desired finish. The hinged holding clip can be released by a gentle pushing on the door, which causes the clip to flip up and release the door. The piece ships with wood screws and anchors.
GJW20- -
Von Duprin 8827 Bottom Latch Case 050461
The Von Duprin 8827 Bottom Latch Case 050461 is used on all Von Duprin 8827 non fire rated exits. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. Included mounting screws.
Von Duprin Part # 050461
Old part # 10175188VR170 -
Yale 2300 Door Closer-Discontinued
Yale 2300 Door Closer
- Spring size 2, 3, 4, 5
- Separate and independent valve for sweep speed and latch speed
- Adjustable backcheck standard
- Regular, top jamb, parallel mount
- 5-year limited warranty
- ANSI/BHMA A156.4 Grade 3
3/4" x 9-1/16" hole spacing
In April of 2023 Norton Yale have discontinued the 2300 and 9300. The Norton 1600 will be sent in place of the 2300. Same Hole Spacing, but adjustable spring tension.
2300- -
Jackson Panic Device 1085 And 1095 Dogging Pin
The Jackson Panic Device 1085 And 1095 Dogging Pin is the piece that keeps the hardware in the open position during business hours. It is activated by pressing the crossbar and then turning the flat head screw driver head. The pin is held in the housings with a screw, which is located on the back of the housing. This pin has been used since about 1988 or so, the old style are no longer made, but they had a roll pin that was used to hold it in place. This package comes with a new spring, set screw and the pin. The Jackson part number on this is 30-1115.
G108554 -
Von Duprin 107765 Plunger Release Bracket
The Von Duprin 107765 Plunger Release Bracket is used with the Fire Rated 8827-F Top Latch. When the door closes, the Release Pin on the 88VR10-F (050462) hits the post and releases the latch from the retracted position. Once the top latch is released, it drops the bottom latch into the floor.
Von Duprin # 107765
G107765- -
Ives 7222 Pivot Set
• Handed
• Top, header mount
• Bottom, base plate mount
• Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
• Maximum door load 200 pounds
• Vertical adjustment range 3/16", with positive locking7222 -
Jackson 1085 Panic Device Concealed Vertical Rod
The Jackson 1085 Panic Device is one of a few original manufactures of Panic Hardware for aluminum framed glass doors, or storefront doors. The 1085, 1095 along with their door closer the 20-330 were installed on about half of these doors in the 1970's and 1980's. They were installed on Vistawall and Kawneer doors just to name a few. Universally recognized as the standard for aluminum storefront hardware it is made of high tensile strength aluminum. The device is Non Handed, Comes with 45" cross bar that is easily cut in the field. Also includes the Concealed Vertical Rods, Screws and Strikes.
Replacement parts are available, in stock!
1085EO -
Dor-o-Matic 1590 Panic Device
The Doromatic 1590 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1590 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Replacement parts are also available
Shipped with all screws and strikes.
1590EO- -
Falcon 25-V Vertical Rod Panic Device
Falcon 25-V Vertical Rod Panic Device
The Monarch Falcon 25-V is designed for high-traffic applications were added strength and durability are required. The device includes all strikes and mounting screws required for installation. Available in 3' and 4' devices, the 3' device is for doors 30" to 36", the 4' device is for doors that are 37" up to 48" wide. The vertical rods furnished with this device are for doors up to 7' tall, if your doors are taller, please contact us.
G25VEO- -
Cal-Royal 45 Narrow Stile Surface Vertical Rod
The Cal-Royal 45 Narrow Stile Surface Vertical Rod is part of the new 4500 Series. They are designed for Narrow Stile Doors with a Stile width of at least 1-3/4 inches. The device is rated as a Grade 1, which is the heaviest traffic rating possible. They ship with all mounting hardware and strikes. This device is non handed and uses a Allen Type dogging system.
45-SVR -
Cal-Royal 45 Narrow Stile Rim Device
The Cal-Royal 45 Narrow Stile Rim Device is part of the new 4500 Series. They are designed for Narrow Stile doors with a minimum of an 1-3/4" stile width. This is a Grade 1 Exit Device, which is the highest traffic rating possible. Exit device ships with strike and mounting screws.
Shown is Left Hand Reverse
Opposite would be Right Hand Reverse45-RIM -
Von Duprin 2670 Guard-X Panic Device
Heavy Duty Design
The new Series 2670 Exit Alarm Lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1 1/4" (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.Fits 36" to 48" doors.
Uses 9 volt battery
Ships with all mounting hardware and strike.2670EO- -
Dor-o-Matic EL1590 Rim Panic Device
Dor-o-Matic/Falcon EL1590 Panic Device with Electric Latch Retraction
The Dor-o-matic 1590 is our heaviest device and offers a clean appearance with push pad styling and a variety of practical features. The Dor-o-matic 1590 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Requires a Power Supply
Replacement parts are also available
Shipped with all screws and strikes.
EL1590EO- -
Floor Door Stop / Holder FS446
Floor Door Stop / Holder FS446
The Ives FS446 Door Stop and Holder is a modification of the FS444, which is the non holder version. It is considered a manual type floor holder, because you have to manually latch the holder for it to hold the door open. It is constructed of cast bronze or brass, and is no longer available in a cast aluminum. It is designed for doors with up to 2-1/2" of undercut, meaning the distance between the finished floor and the bottom of the door. It measures 3-3/4" overall height with a 2-1/2" diameter, and the distance from the base to the center line of the rubber non-marring stop is 2-1/2". This stop is packed with expansion shield and lead shield.
GJF26- -
Von Duprin 22 Panic Only 22EO
The Von Duprin 22 Panic Only 22EO is part of the economy series. Even though is it the least expensive Von Duprin, it is still a very heavy duty panic device. It is for all types of single and double doors with mullion, for door stiles as narrow as 3-13/16”. All 22 Series exit devices are UL listed for Panic Hardware or Fire Hardware, and are certified to ANSI A156.3, Grade 1. The Von Duprin 22 ships with the 299 standard strike, dog key, and all of the needed mounting fasteners. Even though it is the least expensive, they offer all the replacement parts, just like there other models. We stock all of the replacement parts Von Duprin has to offer on the 22 and 2227 series.
We keep the 36” devices in stock in the SP28 Sprayed Aluminum and SP313 Sprayed Dark Brown in stock.
Von Duprin Part # 22EO22EO -
Yale 7100 Panic Device
Yale 7100 Exit Device
Door Opening Width:
-36 for 30" - 36" (762 - 914mm) doors
-48 for 36-1/2" - 48" (927 - 1219mm) doors
Door Thickness: 1-3/4" (44mm) standard.
Minimum Stile Width: 4-1/2" (114mm)
Projection: 3-1/4" (83mm) active, 2-3/4" (70mm) dogged
Latchbolt: 3/4" (19mm) deadlocking stainless steel Pullman-type
Strike: 757 (panic),7100EO-