Search results for: 'rollers for sizing door brass'
- Did you mean
- rolls for sizing door brass 0
- rollers for spring door brass 0
- roller for sizing door brass 0
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 push bar panic exit dog parts 1308
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit drill parts 1306
- door series 30 push bar panic exit dent parts 1306
- door series 30 push bar panic exit deep parts 1310
- door series 30 push bar panic exit detex parts 1307
- door series 30 push bar panic exit drop parts 1307
- door series 30 pull bar panic exit drop parts 1306
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Wall Door Stop / Bumper Heavy Duty Convex WS402CVX
The Ives WS402CVX Wall Door Stop is our heaviest duty wall stop of this design. They are constructed of a heavy duty cast brass base that is then plated to your desired finish. The wall stop is 2-1/2" in diameter and has a 1" projection. It features a special retainer cup that makes the rubber tamper resistant. This stop ships with screw and drywall anchor.
GJ50C- -
International Door Closer 854P Series
The International Door Closer 854P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and whether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 42” interior or 36” exterior doors.
3/4" x 9-1/16" mounting holes
854- -
International Door Closer 855P Series
The International Door Closer 855P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 48” interior or 42” exterior doors.
3/4" x 9-1/16" mounting holes
855- -
Floor Door Stop / Holder FS43
Floor Door Stop / Holder FS43
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF43A or F43A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS43. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-5/8" to 2-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF43A- -
Wall Door Stop / Bumper Heavy Duty Concave WS401CCV
The Ives WS401CCV Wall Door Stop is our heaviest duty wall stop of this design. They are constructed of a heavy duty cast brass base that is then plated to your desired finish. The wall stop is 2-1/2" in diameter and has a 1" projection. It features a special retainer cup that makes the rubber tamper resistant. This stop ships with screw and drywall anchor.
GJ60C- -
Door Push Plate 50
The Door Push Plate 50 is the most common push plate we find out in industry today. It does not matter what type of commercial building you go into, you will find this style and thickness plate. The are offered in standard sizes, that are shown below, and can be made to custom sizes. The plates are 16 gauge metal (.050 thick) and are shipped with 4 beveled edges. The matching finiish screws are shipped with each plate.
3 x 12" GPH312
3.5 x 15" GPH315
4 x 16" GPH416
6 x 16" GPH616
4 x 20" GPH420
8 x 16" GPH816GPH50 -
International Door Closer 883P Series
The International Door Closer 883P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53
3/4" x 8-3/16" mounting holes
883- -
International Door Closer 884P Series
The International Door Closer 884P Series is a very common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 42” interior or 36” exterior doors.3/4" x 9-1/16" mounting holes
884- -
Door Pull Handle 24
The Door Pull Handle 24 features a 5-1/2" center to center screw spacing. The handle is constructed of aluminum, stainless steel or brass depending on the desired finish. The handle is 1" solid diameter stock and the mounting posts are 3/4" diameter stock. It measures 8" overall length and projects from the door 2". It ships with thru bolts and finish washers. Also known as a Door Handle or Door Grip.
GHE24- -
International Door Closer 853P Series
The International Door Closer 853P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and whether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53, that had the 3/4" x 8-3/16" mounting holes
853- -
Floor Door Stop / Holder
The F20 or GJF20 was a mainstay of Glynn-Johnson for years. When the Glynn-Johnson door stop line merged with H.B. Ives it became the FS20. This door stop has been discontinued from Ives, but we have been able find a large stock. This Floor Mounted Door Stop also holds the door open, when in the latched position you can push the door and the holding latch will flip up and unlock thee holding clip. It is constructed of cast bronze or brass and then plated to your desired finish. This stop has a 2-1/2" long base that is 1-1/2" wide. The overall height is 3-1/8" with a 2-5/16" floor to rubber stop centerline. For use with door undercut up to 2-1/2".
GJF20- -
Handicap Door Pull 18
With the Handicap Door Pull 18 you are able to get a closed fist behind the pull, which makes it a great ADA Door Pull. Shipped with screws. Also known as a Single Arm Pull, Handicap Grip, ADA Door Pull or Handle. The handle is constructed of cast aluminum, or brass and then plated. The base plate measures 1-3/4" by 2-3/4", the handle projects our 3-1/2". Ships with #6 by 5/8" matching finish sheet metal screws.
GHP200- -
5" Kickdown Door Stop FS452 | Ives FS452 Kick Down Door Holder
5" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 5" model is for door to floor clearances of 3" or less. The hole spacing is 19/32" by 1-47/64".
Ives Part # FS452
GJ452-5- -
LCN Door Closer 4040SE Track Assy 4040SE-3038
The LCN Door Closer 4040SE Track Assy 4040SE-3038 replaces all Sentronic tracks for the 3130SE, 4010SE, 4110SE and 4040SE Closers. Track includes the roller, 4040SE-3034 and new mounting screws. The replacement track measures 21-3/4" on center for the mounting screws, which may be different then the 3130SE, 4010SE, 4110SE and older 4040SE Tracks. The replacement track is the only way we know of to replace the solenoid. Specify voltage, and color when ordering.
LCN Part # 4040SE-3038
4040SE-3038 -
LCN Door Closer 4021
The LCN Door Closer 4021 is also known as the Smoothee. The 4021 ships with regular arm, standard plastic cover, and self reaming and tapping screws. The 4021 is considered an application specific closer. Meaning you have to specify left and right swing door, and can only be mounted top jamb. A top jamb mount is when the closer is mounted on the top rail of the door frame and the arms hangs down and attaches to the door. Top Jamb door closers are also mounted on the pull side of the door. The Non sized cylinder will work on just about any size interior or exterior door and meets ADA requirements. We ship the 4021 REG.
4020- -
International Door Closer 1802-P - Fixed Spring Closer
The International Door Closer 1802-P - Fixed Spring Closer is one of the heaviest duty closers in the International product line. It offers a 10 year warranty, and is Grade 1 rated, which is the highest rating you can have. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. This door closer is for use on doors up to 36” interior and is not recommended for exterior doors.
3/4" X 9-1/16" Hole Spacing
1802- -
Brushed Bronze Door Kick Plate-6 x 34 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP634b-US10 -
Brushed Bronze Door Kick Plate-8 x 34 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP834b-US10 -
Floor Door Stop / Holder FS446
Floor Door Stop / Holder FS446
The Ives FS446 Door Stop and Holder is a modification of the FS444, which is the non holder version. It is considered a manual type floor holder, because you have to manually latch the holder for it to hold the door open. It is constructed of cast bronze or brass, and is no longer available in a cast aluminum. It is designed for doors with up to 2-1/2" of undercut, meaning the distance between the finished floor and the bottom of the door. It measures 3-3/4" overall height with a 2-1/2" diameter, and the distance from the base to the center line of the rubber non-marring stop is 2-1/2". This stop is packed with expansion shield and lead shield.
GJF26- -
Wall Door Stop / Holder WS445
The Ives Wall Door Stop / Holder WS445 has been a staple of the Ives product line for at least the last 45 years, and is the same product as the WS443 except it has a holder function. The stop features cast brass construction and then plated the the desired finish, which makes it ideal for interior or exterior use. The rubber tip is a non marring rubber, that can be replaced and we keep in stock. The stop has a 2-1/4" base diameter and a 3-11-16" projection from the wall. This product ships with an expansion shield and lead shield. This holder is considered a manually holder due to the fact you have to bend over and latch and unlatch it.
GJW27- -
International Door Closer 851P Series
The International Door Closer 851P Series is not a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors. The 851 meets the size 1 ADA requirements.
3/4" x 6-3/8" mounting holes
851- -
LCN Concealed Door Closer 3031
The LCN Concealed Door Closer 3031 is mortised into the top of the door. Standard 3030 series closer shipped with regular arm and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Handed for right or left swinging doors. Closers to meet ADA requirements.
3030- -
International Door Closer 852P Series
The International Door Closer 852P Series is common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
3/4" x 7-3/8" mounting holes
852- -
Falcon 299 Strike
Falcon 299 Strike
The Falcon 299 Strike is used on the 25-R and 24-R Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". This strike is the same as the Von Duprin 299 Strike.
Ships with shim and mounting screws
Falcon Part # 299
Fa299 -
4" Kickdown Door Holder Grand Standard
4" Kickdown Door Holder Grand Standard
Frequently we are asked, “What is the heaviest duty kick down holder you sell?” The answer to that question is any of Grand Specialty door holders. These door stops are American made and simply the best out there. They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg. They are constructed of steel, and not cast like all of the other door holders made.
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
- No roll pin at pivot point
- Mallable with a pair of pliers
- Rubber shoe held on by a screw
- American Made
- Zinc plated steel
The bottom mounting screws holes would be 3-3/8" to the Floor when mounted.
GJ604- -
Floor Door Stop Dome 1" Height FS436
Floor Dome Door Stop 1" Height FS436
We ship the H.B. Ives FS436 Floor Dome Stop, another product made by Ives that has been around for 50 plus years. Take a walk around a school made in the 1960's and you will probably find this door stop, or the hole were it used to be. This Dome Stop is used on doors without thresholds that have a bottom of the door to floor clearance of less than 5/8". The are constructed of cast aluminum or cast bronze depending on the finish you are looking for. The rubber stop is non-marring and replaceable. The stop has a base that is 1-3/4" x 2" oval, an overall height of 1" and a base height of 3/16".
GJFB13-