Search results for: 'heavi cycl push plate good'
-
Von Duprin 33/35/98/99 EL Dogging Rod 3' 050531
Von Duprin 050531 EL Dogging Rod 3'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 3' designates the model it is used on. The 3' model is used on doors 36" or under. The Rod measures roughly 11" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices
Von Duprin Part # 050531, Old Part # 110007
No longer manufactured
G050531 -
Von Duprin Dogging Hook 090044
The Von Duprin Dogging Hook 090044 is the piece that grabs the push bar mechanism and keeps it in the dogged position. The does wear out, but it takes a long time. This piece is used on the 22, 33A, 35A, 98 and 99 series devices made after 1997. We sell this part individually and it is #5 on the diagram.
G090044 -
Von Duprin 990DT Trim
The Von Duprin 990DT Trim is known as a Dummy Trim. This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building. If you have a different manufacture or a different Von Duprin series on the interior, it will not line up. On the back of this plate we usually find the number 990 stamped on it. The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices. If you have a Mortise or Concealed Vertical Rod, call us and we will order that model. The plate measures 3" wide by 14-3/16" tall. Order here for the 990DT-R&V.
99DT- -
LCN Door Closer 4021 FL
The LCN Door Closer 4021 FL is shipped with fusible link arm, standard plastic cover, and self reaming and tapping screws. This closer is designed to hold open fire doors, when the fusible link melts, it releases the hold open arm, so the door will close. Sized cylinders for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”. Included arm has a fusible link that melts at 120 degrees, allowing to door to close. Door can be closed any time with a gentle pull. Closer mounts top jamb (push side), specify right or left swinging door. 4021 cylinder meets ADA requirements.
4020FL -
LCN 1250 Rw/PA Door Closer-New
The LCN 1250 Rw/PA Door Closer is a direct replacement for the Norton 1600, Yale 50, Falcon/Dor-o-Matic SC60, LCN 1260 and International 8050 Series Door Closers. It is ideal for low frequency and low abusive traffic areas, such as store front doors and interior doors. It features, a cast aluminum cylinder, 15 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
Hole Spacing 3/4” x 9-16”1250- -
Sargent Parallel Arm Bracket 125-P
The Sargent Parallel Arm Bracket 125-P is for use with the 25-O regular arm, to convert it to a parallel arm mount. A parallel arm mount is when the door closer is mounted on the push side of the door and the arm is parallel to the door when in the closed position.
Sargent part # 125-P9
350PAB- -
LCN 4310HSA Sentronic
The 4311HSA SENTRONIC is an electrically controlled closer/holder designed to provide easy passage for groups of pedestrians through high traffic doors. Pedestrians, moving through the doorway, trigger the built-in scanner. When the door is opened to 80° or more, the door is electrically held open to minimize wear and tear on applied door hardware. After the last pedestrian in a group passes through the doorway, the system timer releases the hold-open, closing the door under control of the heavy duty closer. Single lever (track) arm closer is specifically designed for pull side mounting. Choice of finishes and accessories meet virtually all high traffic installation requirements.
4310HSA -
Floor Door Stop / Holder FS40
Floor Door Stop / Holder FS40
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1/2" or less
Holder Dimensions 3" Wide x 3-11/16" HighGJF40A- -
Dor-o-Matic 2090 Backplate Assembly PB89
The Dor-o-Matic 2090 Backplate Assembly PB89 has been around since the early 1970's. It is now called the Falcon 2090 Back Plate Sub Assembly, but it is the same thing, just different owners of the company. This piece includes the plate casting, latch bolt, pinion gear, and retractor.
Doromatic Part # 4270902974 Right Hand
Doromatic Part # 4270902968 Left HandLEFT HAND BACKPLATE SHOWN
G209090 -
LCN 4050 Rw/PA Door Closer-New
The LCN 4050 Rw/PA Door Closer is a newer Closer and is a direct replacement for the Norton 7500, Yale 4400, and Falcon/Dor-o-Matic SC70 Series Door Closers. It features, a cast aluminum cylinder, 25 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
Hole Spacing: 2-3/8” x 6-3/4”
4050- -
LCN 1450 Rw/PA Door Closer-New
This new LCN 1450 Rw/PA Door Closer is a direct replacement for the Norton 8000,Yale 3000, and Falcon/Dor-o-Matic SC80 Series Door Closers, or any door closer that has the 3/4" x 12" hole spacing. It features, a cast aluminum cylinder, 25 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
Hole Spacing 3/4” x 12”
1450- -
Cal Royal 4400 THP4400 Thumbpiece Trim
The Cal Royal 4400 Thumbpiece Trim is for use on the 4400 Rim Device only. The plate measures 3-1/2 by 16 inches. The key locks or unlocks the thumbpiece. This plate ships with a 6 pin solid brass "C" keyway rim cylinder. And only comes in brushed chrome and dark bronze finishes.
THP4400- -
Von Duprin 33/35/98/99 EL Dogging Rod 4' 050532
Von Duprin 050532 EL Dogging Rod 4'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 4' designates the model it is used on. The 4' model is used on doors 48" down to 36". The Rod measures roughly 17" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices. Use part # G050531 if your door is equal or under 36".
Von Duprin Part # 050532, Old Part # 110008
G050532 -
Glynn-Johnson Overhead Door Holder 90 Series Surface Mounted
The Surface Mounted Glynn-Johnson 90 Series Overhead Door Holder are the most rugged models available for heavy-duty applications. The channel is surface-mounted to the door, most often with barrel nuts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and frame preparation.
GJ90 -
Adams Rite Cylinder Dogging Assembly 31-0265-01-IP
The Adams Rite 31-0265-01-IP is used on the current versions of their devices for Cylinder Dogging. Cylinder Dogging is when you have a Mortise Cylinder to lock the device in the unlocked positions (Dogged). Very similar to the Hex Key Dogging Assembly, but the mounting plate is longer.
G31026501IP -
LCN Sentronic Closer 4040SE
The LCN 4040SE Sentronic Door Closer is a heavy duty, non-handed, non-sized closer/holder designed to provide single point hold-open for fire and smoke barrier doors. The door is held open until current interruption releases the holding mechanism and the door closes. Single lever (track) arm closer is specifically designed for interior doors. Choice of finishes, track functions, and installation accessories meet virtually all life safety requirements. The SE stands for Single Point Electronic, with this closer the hold open point can only be one point, so the closer has to be positioned on the door to get the proper hold open point.
This technology has been around since 1972, but back then you would order the 4110SE or 4010SE. These were application specific closers, so you had to specify the hand of the door, door size, and the type of mounting. If you do have an older version, the 4040SE will replace it.
4040SE -
Bilco Barracuda DSO-PB for Out Swinging Doors with Panic Devices
The Barracuda DSO-PB is for use on Out Swinging 36" Doors with Exit Devices. It is constructed of heavy duty steel with a durable powder coated finish. The bar goes across the door frame and grabs the mounting cleat with an adjustable clamp. To secure the door, simply turn the handle until it is secured. They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4". This device ships with all of the hardware and a wall mounting rack for storage.
DSO-PB -
Ives Dust Proof Strike DP1
Ives Dust Proof Strike DP1
• Designed for use with the bottom bolt of all flush bolts.
• Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes.
• Strike hole is 3/4" Diameter and 1-1/8" DeepDP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1- -
Von Duprin Panic Device 880NL Trim
The Von Duprin Panic Device 880NL Trim is for the 88 Series only. The stanchions welded on the back of the plate line up with the88 device on the interior. Optional key cylinder locks and unlocks the device, and can be used for dogging the door open. Plate measures 3" wide by 14-3/16" long, with an 1-5/8" bore for cylinder.
Von Duprin part # 880NL-R
880NL -
Ives 7222 Pivot Set
• Handed
• Top, header mount
• Bottom, base plate mount
• Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
• Maximum door load 200 pounds
• Vertical adjustment range 3/16", with positive locking7222 -
Handicap Door Pull 18
With the Handicap Door Pull 18 you are able to get a closed fist behind the pull, which makes it a great ADA Door Pull. Shipped with screws. Also known as a Single Arm Pull, Handicap Grip, ADA Door Pull or Handle. The handle is constructed of cast aluminum, or brass and then plated. The base plate measures 1-3/4" by 2-3/4", the handle projects our 3-1/2". Ships with #6 by 5/8" matching finish sheet metal screws.
GHP200- -
Floor Door Stop-Security FS18
Floor Door Stop-Security FS18 is designed for areas of high vandalism. The molded rubber is flame resistant and mounted to a 5/8" threaded mounting shaft. Once the 7/8" diameter hole is drilled to a depth of 2-1/2" it can be grouted in concrete and leaves no exposed fasteners. The recommended grout is Thorogrip. They are ideal for jail or security cell areas. There are two versions of this door stop one projects 1-1/2" (FS18S) out of the floor and the other 3" (FS18L).
GFS18- -
Dor-o-Matic 1690/1990 Top Strike Shim Package-SHIM.112
Doromatic PB48 Strike Shim Package Of 10 Pieces
This Dor-o-Matic product is for the PB48 Top Strike. This is the shim that goes under the top strike. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. They are only sold in packages of 10.
Doromatic Part # SHIM.112
G199034-SHIM -
Cal Royal Products CR441 Door Closer
The Cal Royal Products CR441 Door Closer is an inexpensive replacement for the LCN 4040. The mounting holes on the CR441 matches the 4040, at more than 1/2 the cost. This closer will work on the left or right, push, pull or top jamb for mounting. Just like the LCN 4040 it features adjustable spring tension, closing, latching and back check speeds. It is considered a Grade 1 closer, which is the heaviest rating possible.
CR4040- -
Dor-o-Matic 1690/1990 Top Strike PB48
The Dor-o-Matic 1690/1990 Top Strike PB48 is used on the Dor-o-Matic 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB48.
Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
Dor-o-Matic/Falcon 1690 Repair Parts BreakdownG199034 -
Ives FB458 Metal Door Flush Bolt
Ives FB458 Metal Door Flush Bolt
The Ives FB458 is a UL Listed Flush Bolt for use on Fire Doors. The face plate measures 1" wide by 6-3/4" long with a depth of 1-1/8". Hole spacing is 1/2 inch by 6-1/4 inches on centers. The bolt has a 3/4" throw and is 1/2" diameter. This Flush Bolt is available in Polished Brass, Oil Rubbed Bronze (dark brown) and Brushed Chrome. We try to stock the 12" rods, which are standard, but we can also get 18", 24", 36" and 48"
Ives Part # FB458
FB458-