Panic Hardware
Our company RBA Door is a top distributor of panic devices (also known as exit devices) and panic hardware from leading name brands in the door security industry. Applying security systems and alarm systems to doors that can be found in schools, offices, businesses and in other buildings has become a vital criterion to overall building visitor safety. We entered into the panic hardware industry in the hopes of providing consumers with panic devices and exit device hardware to potentially add to the safety of establishments around the world.
We sell brand new panic devices that can be freshly installed on doors in all sorts of buildings with visitors that constantly come and go. The panic hardware that we supply is more for replacing old, falling apart hardware on your panic devices that have already been installed for a while.
The panic/exit devices in our selection range from surface vertical rod devices to concealed vertical rod devices, from rim exit devices to battery operated alarm systems. Our replacement panic hardware consists of trims, rim cylinders, electric strikes, end caps and more.
Shipping And Handling For Panic Devices
Read our online product descriptions for the panic devices and the panic hardware that we distribute. There you will find the shipping details for the product you clicked on.
Product shipping times vary. If the Lead Time is In Stock, then the panic devices and panic hardware you are ordering will ship straight to you from our warehouse with no delay. If the Lead Time is a day, a week or more, then we will have to order your panic devices from the manufacturer's factory and they will ship from there.
Panic Devices Manufacturers
Below is a list of panic devices brands that we have available in our selection for you to order online. We have panic devices and panic hardware from at least 14 top-rated door security brands. Click on one of the brands listed below for a brief overview of each manufacturer’s company background and an overview of their products.
- Adams Rite
- American Device
- Cal-Royal
- Corbin Russwin
- Detex
- Dor-O-Matic
- HES
- International Door Closer
- Ives
- Jackson Exit Device
- Monarch Exit Devices
- Sargent
- Von Duprin Exit Devices
- Yale
Commercial Door Panic Devices
What kind of panic/exit devices do you want installed in your building? We sell several styles of panic/exit devices from reputable panic devices brands. If you already have something in mind, you can do a quick search to see whether we carry the panic/exit devices you are searching for. If not, review the panic devices that we offer so that you can reach a conclusion about which style you will need to use for your doors.
The panic devices brands we sell from manufacture surface vertical rod exit devices, concealed vertical rod exit devices, rim exit devices, crossbar exit devices, touch bar exit devices, push bar panic exit devices, battery powered panic alarm systems and heavy-duty exit devices that you can order from our website. Many of these panic devices come with different color, finish and size options, so take your pick.
The panic devices you order from our web store can work on either single doors or double doors, so be sure to note which style you will need for your door project before placing your order. Also check to see whether the commercial door exit devices are left handed, right handed or non handed.
Plus, check the product description and make a mental note of what type of doors the device can be used on. Some panic devices can be used on glass doors, narrow stile doors, aluminum hollow metal doors and more. This will be important information to keep in mind when ordering your panic alarm systems for schools, offices or another organization.
Panic Hardware
While we offer numerous styles of panic device for doors in commercial buildings, we also sell replacement exit device hardware if you ever need to replace a part on panic devices or panic alarm systems. We sell panic hardware for glass doors, panic hardware for single doors and double doors, and even panic hardware for some discontinued panic devices. What type of panic hardware you should order will depend entirely on which panic devices are installed on the building doors.
We have more than just trims, strikes, levers, end caps, dogging assemblies, latch covers, brackets and springs in our selection of panic hardware from popular name brands in the industry. Whether you need panic hardware for rim exit devices, panic hardware for glass doors or panic hardware for another reason, we have the perfect replacement parts for you. Order your panic hardware today to receive your parts as soon as possible and get started on making crucial repairs to your panic exit devices.
Order Details For Panic Exit Devices
Make your purchase of panic exit devices and panic hardware through our web store today. We have plenty of exit devices and panic parts that are available to be shipped to you immediately. Before you pay, we want to make sure that all of your questions are answered.
Send us your questions regarding your panic exit devices order before you check out and we will provide you with helpful answers at our earliest convenience. Give us a call or send us an email so that we can properly assist you with your online panic exit devices order.
-
Jackson Panic Device Crossbar 1085/1095
The Jackson Panic Device Crossbar is for use on the 1085 and 1095 hardware. The bar is 45" long and can be cut in the field with a chop saw or hack saw. There is a groove the entire length of the bar for added and strength and for the thread forming screws to thread into. The Jackson part number is 30-733-PKG, and it ships with the cross bar screws.
Jackson Part # 30-744PKG or 30744PKG
G108520- -
Jackson Panic Device 1095 Standard Strike
The Jackson Panic Device 1095 Standard Strike is a strike they have been using for the past 20 years. You might have one of the older roller strikes, but this will work in its place. The older style roller strike is no longer available. Jackson Exit Device part # 30-2436.
G109556 -
Jackson Panic Device Top Bolt Trip 1085/1285/2086
The Jackson Panic Device Top Bolt Trip is for use on the 1085, 1285, and 2086 devices. The 30-824 Trip Assembly mounts on the jamb stop and has a pin that sticks out of it (actually a threaded set screw). The pin lines up with the release plate on the Top Bolt Guide Assembly, when the pin hits the top plate as the door closes, it releases the rods, so they can extend.
G108558 -
Jackson 1085 30-1242 / 30-1243 Lever Arms
The Jackson 1085 30-1242 / 30-1243 Lever Arms are for use with the Jackson 1085 Housings, both sides. And the Jackson 1095 Inactive (hinge side) Housings. To determine hand, stand inside and look out the door, what is side is the arm on? If it is on the Right then order Right.
G10852x -
Jackson 1095 30-1247 / 30-1248 Lever Arm
The Jackson 1095 30-1247 / 30-1248 Lever Arm. Replacement Lever Arm for the Jackson 1095 Active Housings. This arm will only work on the 1095 Active Case! The difference between this arm and the 1085 arm is the Pin in in the top of the arm. The pin fits into the triangular linkage clip, which actuates the latch bolt. Handing is determined by standing inside and looking out, if the arm in on the right hand side of the door, it is a right hand lever that you would order.
G10955X -
Dor-o-Matic 1490/1590 Dogging Bracket PB222
Dor-o-Matic 1490/1590 Dogging Bracket PB222
If your Dor-o-Matic / Falcon exit device is not locking open when the hex key is turned, this is the most likely cause.
Dor-o-Matic / Falcon Part # 4270107046 or PB222
GPB222 -
Jackson Panic Device 2085 Dogging Assembly LH/RHRB
Jackson Exit Device 2085 Dogging Assembly LH/RHRB
This Jackson Exit Device dogging assembly is used on the 2085 Device made after October 1, 1999. It will work on the previous version of this exit device, but you may have to use a file a remove some material from the catch.
Jackson Part # 30-2462
This spring would be for the Device on the Right, shown below.
G302462 -
Jackson Panic Device 2085 Dogging Assembly RH/LHRB
Jackson Exit Device 2085 Dogging Assembly RH/LHRB
This Jackson Exit Device dogging assembly is used on the 2085 Device made after October 1, 1999. It will work on the previous version of this exit device, but you may have to use a file a remove some material from the catch.
Jackson Part # 30-2467
This spring would be for the Device on the Left, shown below.
G302467 -
Jackson Panic Device 20-1266 2085/2095 End Cap
Jackson Exit Device 2085/2095 End Cap
The Jackson Exit Device 2085/2095 End Cap measures 3-1/8" high, by 1-1/8" wide, and has a projection of 1-15/16". The mounting lugs are 1-3/8" on center and project out 1".
Jackson Part Number 30-1266-628 Aluminum
Jackson Part Number 30-1266-313 Dark BronzeG301266- -
Dor-o-Matic 1490/1590 Compression Spring PB224
Dor-o-Matic 1490/1590 Dogging Compression Spring
Doromatic part # 4299101020 or PB224
GPB224 -
Dor-o-Matic 1690 Pinion Support Bracket PB312
Dor-o-Matic 1690 Pinion Support Bracket. Bracket holds pinion tip so that it will not slip
Doromatic part # BRKT.478, BRKT.133 or PB312
Dor-o-Matic 1690 Repair Parts Breakdown
GPB312 -
Dor-o-Matic 1690/1790 Hinge End Cap Kit PB314
The Dor-o-Matic Falcon 1690/1790 Hinge End Cap Kit PB314 includes both pieces and the mounting screws. It is made of die cast metal that is powder coat painted to a black color. This piece is mounted on the hinge side of the door. Doromatic / Falcon part # ECAP.130 or PB314. Formly known as the ECAP.129
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB314 -
Dor-o-Matic 1690/1790 End Cap Bracket Screw PB315
Dor-o-matic Falcon 1690 and 1790 End Cap Bracket Screw. This screws holds the bracket that holds the end cap.
Doromatic part # SCREW.1070 or PB315
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB315 -
Dor-o-Matic 1690 Screw PB316
Dor-o-Matic 1690 End Cap Screw
#8 x 1-1/2” FPHTC
Doromatic part # screw.1072 or PB316
Dor-o-Matic 1690 Repair Parts Breakdown
GPB316 -
Dor-o-Matic 1690 Hex Soc Set Screw PB317
Dor-o-Matic 1690 Hex Socket Set Screw-PB317
1/4-20 x 3/8"
Doromatic part # SCREW.1067 or PB317
Dor-o-Matic 1690 Repair Parts Breakdown
GPB317 -
Dor-o-Matic 1690/1790 Lock Stile Push Bar End Cap PB318
Dor-o-Matic Lock stile Push Bar End Cap
The Dor-o-Matic -Falcon 1690/1790 Lock Stile Push Bar End Cap PB318 is used on the 1690 concealed vertical rod and 1790 rim device.This is the end cap for the push bar and is located closest to the active housing. Doromatic part # ECAP.129 or PB318
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB318 -
Dor-o-Matic 1790 Latch Pin PB320
Dor-o-Matic 1790 Latch Pin. This is the 1790 latch bolt axle.
The other component of this part would be the GPB328 Latch Retaining Ring Retaining
Doromatic part # 969467-89 or PB320
Dor-o-Matic 1790 Repair Parts Breakdown
GPB320 -
Dor-o-Matic 1690/1790 Push Bar Pin PB322
Dor-o-Matic 1690 and 1790 Pushbar Pin
Doromatic part # PIN.128 or PB322
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB322 -
Dor-o-Matic 1790 8-5/8" FPHSMS Screw PB324
Dor-o-matic 1790 Center Case Cover Screw
For devices shipped before September, 2004
Doromatic part # SCREW.1025 or PB324
Dor-o-Matic 1790 Repair Parts Breakdown
GPB324 -
Sargent 28-0109 Center Case Cam for 2828 / 2838
Sargent 2828 / 2838 Center Case Cam
The Sargent 2828 / 2838 Center Case Cam is the Cam that the key cylinder actuates to open the door. The Cam is located in the middle of the Center Case. We can no longer get the retaining ring to hold it in place.
Sargent Part # 28-0109
G280109 -
Dor-o-Matic 1790 Channel Spacer PB326
Dor-o-Matic 1790 Channel Spacer. This part is used on Dor-o-Matic 1790's with an outside key cylinder.
Doromatic part # SPACER.107 or PB326
Dor-o-Matic 1790 Repair Parts Breakdown
GPB326
