Manufacturers
-
Dor-O-Matic 2090 Panic Device
The Dor-O-Matic 2090 Panic Device has been around since the early 1970's. Even though it is now called the Falcon 2090 Panic Hardware, it is the same exact device. The 2090 provides balanced appearance, dependable performance and economical pricing, making it a popular choice where rim exit devices are required. The package includes both housings, 41" crossbar (that can be cut in the field), mounting screws and strike.
Hand: Specify RHR or LHR, not reversible. See Below
Left Hand Reverse shown in picture
Latchbolt: 1/2" throw hardened steel.
Dogging Feature: Hex dogging standard.
Sizes: Field adjustable width, 41" crossbar standard, fits
3' 8" door width, extra length crossbars available.
Doors: 1-3/4" thick metal or wood doors, specify if wood door.
Projections: 4-3/8" extended, 2-1/2" depressed.
Stile: 1-3/4" minimum.Replacement parts are also available
G2090EO -
Doromatic 1990 Panic Device
The Doromatic 1990 Panic Device has a long history of reliable performance. Although it is now called the Falcon 1990, they are the same device. This device is non handed, meaning it can go on left hand or right hand door. The standard included 41" crossbar will work on doors up 3'8" wide, and the stardard rods will work on a 7' door. It is equipped with hardened steel latches and adjustable strike to ensure safety, security and quiet operation. The package includes all of the mounting screws and strikes.
Hand: Field reversible, non handed.
Dogging Feature: Hex dogging standard.
Cylinder: Rim, key entry (NL) or hold back (HB) available
(field selectable)
Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7'
door, extra length cross bar available.
Doors: 1-3/4" thick metal doors.
Projections: 4-3/8" extended, 2-1/2" depressed.
Stile: 1-3/4" minimum.G1990EO -
Monarch / Falcon 24-R Series Rim Exit Device
Monarch / Falcon 24-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
- Hand: Non-handed.
- Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN. - Strikes: 299 strike standard.
- Latchbolt: Stainless steel, 3⁄4" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
- Projection: 2-3⁄4" maximum, 2” dogged.
- Mounting Height: 40-1⁄4" from CL to finished floor.
- Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard. - ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
- Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.
Call for pricing on non listed finishes
2 week lead time24EO-- -
Cal Royal Panic Device 7700 Rim Device
Cal Royal 7700 Rim Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.
Templating matches the Von Dupin 99 and 98
CR7700EO- -
8600 Adams Rite Concealed Vertical Rod
The Adams Rite 8600 Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors. The device will fit on stile widths of 2" or more. We recommend this device for replacement only, modifying your existing door to this exit device will be labor intensive. The 8611 would be for the aluminum finish and the 8622 would be or the dark bronze finish. We try to keep the Aluminum and Dark Bronze in stock in the 36" and 48" devices.
This device is not Electrified, please call for the Electrified Model.
8600- -
Adams Rite 8600 Electric Latch Retraction Concealed Vertical Rod
The Adams Rite 8600EL Electric latch Retraction Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors. The device will fit on stile widths of 2" or more. The EL version We recommend this device for replacement or upgrading your current 8600 to Latch Retraction, modifying your existing door to this exit device will be labor intensive. The 8611EL would be for the aluminum finish and the 8622EL would be or the dark bronze finish.
This device is Electrified, please see the 8600 for the non Electric Device.
8600EL -
Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX
The Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX has been around since the early 1970's. Although it is now called a Falcon 1990, it is still the same device. This housing is also the inactive housing on the Dor-O-Matic / Falcon 1090 and 2090 panic hardware. The housing includes all of the interior springs, arm, and dogging screw. Housing measures 7-1/2" long by 1-3/16" wide. The center to center distance of the mounting studs is 6-1/4".
LEFT HAND SHOWN IN PICTURE
See diagrams for handing.
Doromatic part #
4270902784 - right hand dark brown
4270902782 - right hand aluminum
4270902785 -right hand black
4270902778- left hand dark brown
4270902776 - left hand aluminum
4270902779- left hand blackG199001 -
Dor-o-Matic 1990/2090 Cross Bar CBAR
The Dor-o-Matic 1990/2090 Cross Bar CBAR is used on the 990, 1090, 1990 and 2090 Dor-o-Matic and Falcon panic hardware. The bar is 41" and 48" long and is easily cut in the field with a chop or hack saw. The bar is constructed of extruded aluminum and then anodized to the correct finish. The slot where the screw threads in is not threaded, but the screws, sold separately, are thread forming screws. The 41" bars are in stock, the 48" bars have a 3 week lead time
The Dark Bronze Cross Bars are a very dark bronze and will be closer to black.
Doromatic part # CBAR/ 47285197 for the 41" bars, and 47286482 for the 48" bars.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199039 -
Doromatic Exit Device 2090 Active Case
The Doromatic Exit Device 2090 Active Case is for use on the 1090 and 2090 panic hardware. This device has been around since the early 1970's, and is now called the Falcon 2090 Active Case, but it is the same piece. Includes all of the interior hardware. Just unscrew or loosen the three set screws and remove your old case and install and tighten the three set screws. Housing measures 7-1/2" long by 1-3/16" wide, mounting studs have a 6-1/4" center to center distance.
LEFT HAND HOUSING SHOWN IN PICTURE
4270902740 Left Hand Aluminum Stock
4270902742 Left Hand Dark Brown Stock
4270902743 Left Hand Black * One week lead time
4270902746 Right Hand Aluminum Stock
4270902748 Right Hand Dark Brown Stock
4270902749 Right Hand Black * One week lead timeG209001 -
Von Duprin 386DT Dummy Trim
Von Duprin 386DT Dummy Trim
This Von Duprin 386DT Dummy Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Duprin 33A on the inside so they are on cohesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386DT Dummy Trim is non handed.
386DT -
Von Duprin 386NL Dummy Trim
Von Duprin 386NL Dummy Trim
This Von Duprin 386NL Night Latch Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Duprin 33A on the inside so they are on cohesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386NL Night Latch Trim is handed. Uses a standard Rim Cylinder.
386NL -
Cal Royal GLS7700 Narrow Stile Rim Device
The Cal Royal GLS7700 Rim Device is for use on Aluminum Framed Glass Doors when the Stile width is 1-3/4 inch or more. The exit device ships with wood and machine screws, along with the Strike plate. The stainless steel latch bolt has a 3/4 inch throw. This device is a Grade 1, which is the heaviest duty rating.
GLS7700- -
Von Duprin 9975 Panic Device Only
Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed
9975EO -
Von Duprin 99 Panic Device Only
The Von Duprin 99 Rim Panic device has been around since the late 1970's and has gone through a couple of improvements. One of the great things about the 99 is the availability of replacement parts. Even when the device is upgraded, the upgraded parts will work with the older versions that can be close to 40 years old. This device is for all types of single and double doors with mullions. The device is UL Listed for Panic Exit Hardware and is considered Grade 1, the heaviest duty rating possible. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed, meaning it will work on Left and Right hand doors. Ships with all the mounting screws and the 299 Strike.
99EO -
-
Monarch / Falcon 25-R Series Rim Panic Device | Panic Hardware
Monarch / Falcon 25-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2" dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time25EO- -
Adams Rite EX88 Rim Panic Device
The Adams Rite EX88 Interlocking Rim Exit Device is designed for heavy duty use on narrow stile aluminium door applications. The EX88 has a unique latch bolt design that interlocks with the frame of the door. This device is non handed, requires a minimum stile width of 2" and will work on aluminum, hollow metal or wood doors.The device is constructed of extruded aluminum with matching metal angled end caps. To order specify your door width, and the color.
EX88- -
Cal-Royal 9800 Rim Device
The Cal-Royal 9800 Rim Device is a grade 1 Heavy Duty Exit Device. The 9800 has the same template as the 8800 and 9800 with escutcheon lever trim. The 36 inch device will be 32 inches wide and can be cut down an additional 2" to fit doors as narrow as 30 inches. The 48 inch will be 44 inches wide and can be cut down to fit doors 36 inches wide. The device is non handed, meaning it will work on a left hand reverse or right hand reverse door. Strike and mounting screws are included.
9800EO- -
Sargent 2828 Series Rim Panic Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warrantyG20EO- -
-