Parts
Check out our selection of top-notch panic device replacement parts made by reputable manufacturers. Whether you are maintaining a high-traffic building or upgrading for code compliance, having the right panic device hardware and components on hand makes the job faster and more reliable. Our inventory includes replacement cylinders, dogging parts, strike plates, end caps, cover screws, and more—compatible with many popular brands and models.
When you purchase panic devices from RBA Door, every product will meet local building codes as well as your expectations for performance and quality. All panic device hardware and accessories are built with durability, convenience and value in mind. No matter the project, the panic device replacement parts in our inventory are a well-built choice at a reasonable price. We provide trusted, speedy shipping, so you can receive your panic device hardware on time.
Find the Right Panic Device Replacement Parts Online
We offer a range of panic device replacement parts and accessories to keep your devices functioning optimally. Regular maintenance is key to ensuring long-lasting performance, and we can provide you with the resources you need to keep everything in top shape.
We carry panic device hardware for single, double, and glass doors. We also have panic device replacement parts for devices that have been discontinued. The style of panic device hardware you order will depend on which devices are or will be installed on the doors of your space.
Some of the panic device replacement parts in our inventory come in different sizes such as hex keys or dog keys. One size we carry is the 3/16” Panic Hex Key while it also comes in 7/32”, 5/32”, ⅛”, and more sizes. Be sure to check the brand and make sure it matches the device you are using. We also have the Adams Rite Panic Device Dog Key. This panic device replacement part #25-0480 is used on Adams Rite’s older models. It is constructed of high density plastic.
From hex keys to brackets, and springs to end caps, we have an assortment of panic device replacement parts to keep you prepared for your next installation or repair. Keeping a few common items on hand—like keys, springs, screws, and end caps—can also save time when you are working on service calls or last-minute repairs. When you are replacing worn parts or stocking up for future projects, our selection of panic device hardware makes it easy to find what you need. Browse our inventory to locate the right panic device hardware for your application and keep your device operating smoothly and securely.
Selecting the Correct Panic Device Parts for Your Project
Whether you are replacing a worn component or stocking parts for ongoing maintenance, RBA Door makes it easy to find the right fit. Our selection includes parts for rim, mortise, and vertical rod devices, along with trim, end caps, dogging components, strikes, and mounting hardware. Each item is clearly listed so you can match the part to your device and get your door back in service quickly.
To identify the correct parts, start by checking the manufacturer and model number on the device. This information is usually stamped on the push bar, the end cap, or the inside of the chassis. If the label is missing, you can still narrow it down by noting the device style (rim, mortise, or vertical rod), door type (metal, wood, or glass), and whether the opening is single or pairs.
Once you know what you have, you can order only what you need—such as a replacement latch, new end caps, a strike, or a complete retrofit kit. If you are unsure, our team can help you confirm compatibility before you buy, so you avoid delays and keep your exits compliant and working smoothly.
Are you unsure of what you need? Search by part name, device type, or manufacturer, and check the product descriptions for sizing and fit details. If you have questions, our team can help you identify the correct part so your device operates smoothly and safely. Don’t forget to check out our website for helpful articles and videos that can assist you in maximizing the benefits of your panic device hardware.
Contact Us with your Panic Device Hardware Inquiries
Do you need help identifying panic device hardware? Contact our team with your device brand, model, and photos of the area you are repairing. We will help you confirm compatibility so you can order with confidence. With competitive pricing and fast shipping, RBA Door is your source for dependable panic device hardware when reliability matters most.
We are happy to help you place your online order today! Call or email us with your panic device hardware questions so you can get started on your project right away.
-
Von Duprin 22 Mechanism End Cap 900981
The Von Duprin 22 Mechanism End Cap 900981 is the end cap and bracket that ships with the 22 and 2227 series. The bracket is constructed of zinc plated steel and the end cap is black plastic. Bracket also acts as mounting bracket that holds the exit device on the door. Von Duprin does offer a new Metal End Cap, look under related products.
Von Duprin part # 900981
G22R10 -
Von Duprin 22 End Cap Only 968601
The Von Duprin 22 End Cap Only 968601 is the end cap that goes on the hinge side of the door. When the cap breaks off the Dogging Cover Plate just slides off. Works on all of the Von Duprin 22 exit devices. If you need the bracket also, please order part # G22R10. Black plastic construction. As of October 1, 2014, Von Duprin no longer sells just the Plastic Cap Only. The complete End Cap and Bracket 900981 will be shipped in its place.
Von Duprin Part # 968601
G22R25 -
Jackson Panic Device 1085 And 1095 Dogging Pin
The Jackson Panic Device 1085 And 1095 Dogging Pin is the piece that keeps the hardware in the open position during business hours. It is activated by pressing the crossbar and then turning the flat head screw driver head. The pin is held in the housings with a screw, which is located on the back of the housing. This pin has been used since about 1988 or so, the old style are no longer made, but they had a roll pin that was used to hold it in place. This package comes with a new spring, set screw and the pin. The Jackson part number on this is 30-1115.
G108554 -
International 8600 Series End Cap
The International 8600 Series End Cap is used on the hinge side of the the exit device. This cap includes the mounting bracket and the mounting screws. It is constructed of a die cast metal for years of service. The piece measures 2-3/8" by 2-1/4" by 1-1/2". This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.
INT8600EC- -
Jackson Panic Device 1095 Standard Strike
The Jackson Panic Device 1095 Standard Strike is a strike they have been using for the past 20 years. You might have one of the older roller strikes, but this will work in its place. The older style roller strike is no longer available. Jackson Exit Device part # 30-2436.
G109556 -
Corbin Russwin Spring Retainer Hub
Corbin Russwin 677F08-5 Spring Retainer Hub, this is also known as the Yale 60-7000-6217-082 Hub, Lever. However in 2026 it was redesigned and we are now shipping the 905F380 Return Spring Kit, see the red box in the pictures, it includes all of these part in the red box.
G677F085 -
Jackson Panic Device Top Bolt Guide Assembly 1085/1285/2086
The Jackson Panic Device Top Bolt Guide Assembly is used on the 1085, 1285, and 2086 hardware. The piece works by sliding over the top rod when the device is opened. This keeps the rods retracted until the Plunger hits the Trip Assembly when it is closing. Upon hitting the Trip Assy, the plate slides over and the rods retract. It measures 1-1/2” deep x 1-1/16” wide x 15/16” tall, with a hole spacing of 3/4" on the mounting screws. Assembly includes the mounting screws. The Jackson Part number is 30-934.
G108518 -
Adams Rite Cylinder Dogging Assembly 31-0265-01-IP
The Adams Rite 31-0265-01-IP is used on the current versions of their devices for Cylinder Dogging. Cylinder Dogging is when you have a Mortise Cylinder to lock the device in the unlocked positions (Dogged). Very similar to the Hex Key Dogging Assembly, but the mounting plate is longer.
G31026501IP -
Adams Rite CVR/Mortise Plastic End Cap 41-0901-05-IP
Plastic end cap for all Adams Rite Concealed Vertical Rod and Mortise devices, specifically the 8300, 8500, and 8600 Series.
Plastic cap measures 2-3/8" high by 1-1/16" wide by 1-1/4" projection. The metal tab measures 1-3/16" wide by 5" long.
Adam Rite Part # 41-0901-05-IP
G41090105 -
Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117
The Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117 is a replacement for the Screw Driver Headed Dogging Pin. Now instead of using a screw driver you can use the handy thumb piece instead. The package comes with new set screw, spring, and of course the pin. Jackson part number 30-1117.
G108554TP -
Ives Dust Proof Strike DP1
Ives Dust Proof Strike DP1
• Designed for use with the bottom bolt of all flush bolts.
• Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes.
• Strike hole is 3/4" Diameter and 1-1/8" DeepDP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" Deep
DP1- -
Dor-o-Matic 1690/1990 Top Strike PB48
The Dor-o-Matic 1690/1990 Top Strike PB48 is used on the Dor-o-Matic 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB48.
Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
Dor-o-Matic/Falcon 1690 Repair Parts BreakdownG199034
