Parts
When you purchase panic and exit devices from RBA Door, every product will meet local building codes as well as your expectations for performance and quality. All panic device hardware and accessories are built with durability, convenience and value in mind. No matter the project, our panic devices are a well-built choice at a reasonable price.
-
Von Duprin 4954 7' 6" Steel Mullion
The Von Duprin 4954 7' 6" Steel Mullion is the standard mullion used on most double doors with the Von Duprin Exit Devices. Mullions are easily removed by loosening bottom set screw and removing top fitting cover. The steel mullions are 2" wide and 3" deep, with an 1/8" thickness construction. We ship the 7'6" mullion, if you need the 8'6" or 10'6", please call. Package includes the 050390 and 050335 top and bottom brackets.
4954- -
Von Duprin ALK Alarm Kit
The Von Duprin ALK Alarm Kit converts the Von Duprin 22, 33A, 35A, 98 and 99 Devices to an alarmed exit device. When you exit the 85 decibel alarm will sound. Powered by a standard 9 volt battery and is controlled by a Mortise Cylinder with a straight cam. When battery is low, the alarm will beep.
Mortise Cylinder NOT included.
Von Duprin Part # 22-ALK, 33A-ALK, 35A-ALK, 98-ALK AND 99-ALK
ALK -
Von Duprin 107765 Plunger Release Bracket
The Von Duprin 107765 Plunger Release Bracket is used with the Fire Rated 8827-F Top Latch. When the door closes, the Release Pin on the 88VR10-F (050462) hits the post and releases the latch from the retracted position. Once the top latch is released, it drops the bottom latch into the floor.
Von Duprin # 107765
G107765- -
Von Duprin Aluminum Mullion 7'2" | Von Duprin 5654
The Von Duprin 5654 Aluminum Mullion 7'2" comes prepped for two of the 299 strikes. The removable mullion also ships with the 154 Mullion Stabilizers. Mullions are 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-1/8" with a wall thickness of 1/8 ́ ́. The 5654 is constructed of aluminum. Everything is included, except the the 299 strikes. The taller ones are also available, please call for pricing.
G5654- -
Monarch 912L Panic Device Lever Trim
Monarch 912L Panic Device Lever Trim
The Monarch / Falcon 912L Lever Trim is for use on the Monarch / Falcon 19 Series. The 912L measures 7-1/4" high by 1-3/4" wide and the mounting plate is 5/8" thick. We ship these with the Dane Lever, which projects out 2-7/8" in the Classroom function. On the Classroom function the key locks and unlocks the lever handle, the Key Cylinder is not included. We offer this Lever Trim in Painted Aluminum, Painted Dark Bronze, and Brushed Satin Nickel.
Monarch Part # 912L Dane
G912L- -
Monarch 914KIL-KD Panic Device Lever Trim
Monarch 914KIL-KD Panic Device Lever Trim
The 914KIL Lever Trim is for use on the Monarch / Falcon 19 Series. This lever trim is shipped with a standard Schlage C Keyway, that are keyed different if you are ordering multiple levers. The key locks and unlocks the Lever handle.
Monarch Falcon Part # 914KIL-KD
914KIL-KD- -
Von Duprin 55EO Panic Hardware
The Von Duprin 55EO Rim Exit Device is used primarily on aluminum framed glass doors, otherwise known as Narrow Stile Doors. It is one of the most heavy duty cross bar devices made, and has been in production since at least the 1970's. It will fit on Stile widths of 1-3/4", and ships with all the mounting screws, dog key and the 1409 Surface Strike. The device is also non handed.
55EO- -
Falcon 2390 231CA Cylinder Kit
The Dor-O-Matic 2390 231CA Cylinder Kit converts your 2390 exit only to a Night Latch or Hold Back function key lock. All the hardware is included in the package to convert your device, except for the Mortise Cylinder. Housing measures 4-1/2" tall by 1-11/16" wide with a 1-1/8" projection. We send the 231CA which includes the Schlage B502-191 Cam. The 239CA is the same kit, but without the Schlage Cam.
Discontinued item, we only have a few left in Dark Bronze.
231CA- -
Von Duprin 5547EO Panic Hardware
The Von Duprin 5547 Concealed Vertical Rod Exit Device is used primarily on aluminum framed glass doors, otherwise known as Narrow Stile Doors. It is one of the most heavy duty cross bar devices made, and has been in production since at least the 1970's. It will fit on Stile widths of 1-3/4", and ships with all the mounting screws, dog key and all the necessary strikes. The device is also non handed.
To order select Finish and Type of Door Construction. For Metal Doors select Metal Door, for Wood Doors, make sure you select Wood Door, the Wood Door model has additional brackets for mounting.
5547EO- -
-
-
Yale 7100 Panic Device
Yale 7100 Exit Device
Door Opening Width:
-36 for 30" - 36" (762 - 914mm) doors
-48 for 36-1/2" - 48" (927 - 1219mm) doors
Door Thickness: 1-3/4" (44mm) standard.
Minimum Stile Width: 4-1/2" (114mm)
Projection: 3-1/4" (83mm) active, 2-3/4" (70mm) dogged
Latchbolt: 3/4" (19mm) deadlocking stainless steel Pullman-type
Strike: 757 (panic),7100EO- -
Dor-o-Matic 1690 Panic Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of the page.
1690EO -
-
Falcon / Dor-o-Matic MEL1690 Panic Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Replacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
-
Dor-o-Matic 1790 Panic Device
The Doromatic 1790 rim device is typically used in applications where maintenance is a concern because the rim device has fewer parts and pieces than current exit devices. The result is less maintenance and adjustment. The streamlined design has no openings for chains, reducing the risk for code infringements and offering increased building security by eliminating the possibility of tampering and forced entry through the use of coat hangers and other tools. The Doromatic 1790 may also be used to retrofit a Doromatic 2090 series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. If you wish to use a key cylinder on the exterior, you will need the 1790 NL/HB Cylinder Assembly, 179CA.
1790EO -
-
Yale 2100 Panic Device
Yale 2100 Exit Device
Door Opening Width:
-36 for 30" - 36" (76.2cm - 91.4cm) doors, Actual width is 31-3/4"
-42 for 36" - 42" (91.4cm - 107cm) doors, Actual width is 37-3/4"
-48 for 36-1/2" - 48" (92.7cm - 121.9cm) doors, Actual width is 43-3/4"
Door Thickness: 1-3/4" (44mm) standard.
Minimum Stile Width: 4-1/2" (114mm)
Projection: 2-1/2" (64mm) active, 1-3/4" (44mm) depressedAluminum is in stock, Dark Bronze has a 2 week lead time
2100EO- -
-
Dor-O-Matic 2090 Panic Device
The Dor-O-Matic 2090 Panic Device has been around since the early 1970's. Even though it is now called the Falcon 2090 Panic Hardware, it is the same exact device. The 2090 provides balanced appearance, dependable performance and economical pricing, making it a popular choice where rim exit devices are required. The package includes both housings, 41" crossbar (that can be cut in the field), mounting screws and strike.
Hand: Specify RHR or LHR, not reversible. See Below
Left Hand Reverse shown in picture
Latchbolt: 1/2" throw hardened steel.
Dogging Feature: Hex dogging standard.
Sizes: Field adjustable width, 41" crossbar standard, fits
3' 8" door width, extra length crossbars available.
Doors: 1-3/4" thick metal or wood doors, specify if wood door.
Projections: 4-3/8" extended, 2-1/2" depressed.
Stile: 1-3/4" minimum.Replacement parts are also available
G2090EO -
Corbin Russwin ED4200 Panic Device
Corbin Russwin ED4200 Narrow Stile Exit Device
This device is designed for use with a narrow framed glass door, and is recommend for use in high traffic, abusive areas.Device
non-handed.
Trim handed.
Easily field cut to size.
Standard: 36" bar fits 30"- 36"
914mm) door.
Stile
Minimum width 2" (51mm).Replacement parts are also available
ED4200-
