Parts | Von Duprin Exit Devices
Check out our selection of top-notch panic device replacement parts made by reputable manufacturers. Whether you are maintaining a high-traffic building or upgrading for code compliance, having the right panic device hardware and components on hand makes the job faster and more reliable. Our inventory includes replacement cylinders, dogging parts, strike plates, end caps, cover screws, and more—compatible with many popular brands and models.
When you purchase panic devices from RBA Door, every product will meet local building codes as well as your expectations for performance and quality. All panic device hardware and accessories are built with durability, convenience and value in mind. No matter the project, the panic device replacement parts in our inventory are a well-built choice at a reasonable price. We provide trusted, speedy shipping, so you can receive your panic device hardware on time.
Find the Right Panic Device Replacement Parts Online
We offer a range of panic device replacement parts and accessories to keep your devices functioning optimally. Regular maintenance is key to ensuring long-lasting performance, and we can provide you with the resources you need to keep everything in top shape.
We carry panic device hardware for single, double, and glass doors. We also have panic device replacement parts for devices that have been discontinued. The style of panic device hardware you order will depend on which devices are or will be installed on the doors of your space.
Some of the panic device replacement parts in our inventory come in different sizes such as hex keys or dog keys. One size we carry is the 3/16” Panic Hex Key while it also comes in 7/32”, 5/32”, ⅛”, and more sizes. Be sure to check the brand and make sure it matches the device you are using. We also have the Adams Rite Panic Device Dog Key. This panic device replacement part #25-0480 is used on Adams Rite’s older models. It is constructed of high density plastic.
From hex keys to brackets, and springs to end caps, we have an assortment of panic device replacement parts to keep you prepared for your next installation or repair. Keeping a few common items on hand—like keys, springs, screws, and end caps—can also save time when you are working on service calls or last-minute repairs. When you are replacing worn parts or stocking up for future projects, our selection of panic device hardware makes it easy to find what you need. Browse our inventory to locate the right panic device hardware for your application and keep your device operating smoothly and securely.
Selecting the Correct Panic Device Parts for Your Project
Whether you are replacing a worn component or stocking parts for ongoing maintenance, RBA Door makes it easy to find the right fit. Our selection includes parts for rim, mortise, and vertical rod devices, along with trim, end caps, dogging components, strikes, and mounting hardware. Each item is clearly listed so you can match the part to your device and get your door back in service quickly.
To identify the correct parts, start by checking the manufacturer and model number on the device. This information is usually stamped on the push bar, the end cap, or the inside of the chassis. If the label is missing, you can still narrow it down by noting the device style (rim, mortise, or vertical rod), door type (metal, wood, or glass), and whether the opening is single or pairs.
Once you know what you have, you can order only what you need—such as a replacement latch, new end caps, a strike, or a complete retrofit kit. If you are unsure, our team can help you confirm compatibility before you buy, so you avoid delays and keep your exits compliant and working smoothly.
Are you unsure of what you need? Search by part name, device type, or manufacturer, and check the product descriptions for sizing and fit details. If you have questions, our team can help you identify the correct part so your device operates smoothly and safely. Don’t forget to check out our website for helpful articles and videos that can assist you in maximizing the benefits of your panic device hardware.
Contact Us with your Panic Device Hardware Inquiries
Do you need help identifying panic device hardware? Contact our team with your device brand, model, and photos of the area you are repairing. We will help you confirm compatibility so you can order with confidence. With competitive pricing and fast shipping, RBA Door is your source for dependable panic device hardware when reliability matters most.
We are happy to help you place your online order today! Call or email us with your panic device hardware questions so you can get started on your project right away.
-
Von Duprin 9927 Top Vertical Rod 110573
The Von Duprin 9927 Top Vertical Rod 110573 is the standard top rod for door heights up to 7'1". The length of this rod is 35", less the fittings. For larger doors you can order a Rod Extension Kit, which at this point we do not have online. The rod is field adjustable if your doors are less then 7'1". The Old Von Duprin part # is 110573, and the Newer Von Duprin part # is 050512.
G99VR30- -
Von Duprin 154 Mullion Stabilizer Package
The Von Duprin Mullion Stabilizer Package are used with Von Duprin Mullions to stop any deflection on the mullion, which may cause the exit devices to release. We run into issues where people are able to shake the door, and the door opens. The package includes two sets of stabilizers and all the mounting screws.
G154- -
Von Duprin Strike 385A
The Von Duprin Strike 385A is used on the floor for the Von Duprin 2227, 8827, 9827 and 9927 Surface Vertical Rods. Von Duprin recommends this strike if you are mounting the bottom strike in wood. The strike face plate outside dimensions are 2-1/4" x 2-1/4" with an inside dimension of 1-1/8" by 1". This floor strike features a bolt that can be cemented into the floor. This is an optional strike when added security is needed. Zinc plated finish.
385A -
Von Duprin 2227 Top Vertical Rod 109361
The Von Duprin 2227 Top Vertical Rod 109361 will work on all 2227's up to door heights of 7'1". The actual length of the rod is 37-3/8", less the fittings. If your door is taller you will need a rod extension. Call 1-800-642-2403 for longer top rods or rod extensions.
Von Duprin part # 109361
G22VR60- -
Von Duprin 050190 Bottom Fitting for the 5654 / 5754
The Von Duprin 050190 Bottom Fitting is for the 5654 / 5754 Mullions. The package includes the bottom fitting and all of the fasteners. The Fitting measures approximately 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-7/8"
Von Duprin part # 050190
G050190- -
Von Duprin 050135 Top Fitting and Cover for 5654 / 5754
The Von Duprin 050135 Top Fitting and Cover is for use on there 5654 / 5754 Mullions. Package includes the Top Fitting and Cover, and all of the fasteners. The Fitting measures approximately 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-1/8"
Von Duprin Part # 050135
G050135- -
Von Duprin 8827 Bottom Vertical Rod Assembly 050455
Von Duprin 8827 Bottom Vertical Rod Assembly
This bottom vertical rod is used on non fire rated doors. The rod includes the bottom rod connector. The rod is 31-7/8 inches long, excluding the rod connector.
Von Duprin Part #050455
Old Part #101777 and 10323488VR150- -
Von Duprin Pull Handle 972466/972467
The Von Duprin Pull Handle 972466/972467 replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.
Von Duprin Part # 972466 and 972467
Old Part # 969925 and 959122G972466- -
Von Duprin 9927 Bottom Latch 050090
The Von Duprin 9927 Bottom Latch 050090 replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050401. Mounting screws and bracket are included.
Von Duprin Part # 050090
G99VR55 -
Von Duprin 2227/3327A/9927 Top Latch 050400
The Von Duprin 050400 Top Latch is used on the 2227, 3327A, 3427A, 9827 and 9927 exit devices. It is used the Fire-Rated along with the standard Panic Devices. The 050400 is sold without the the Mounting Bracket, if you need the Mounting Bracket you can order the 050546, or order the G99VR10 (050091) which will come with the Bracket. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050400
G050400 -
Von Duprin 2227/3327/9927 Bottom Latch 050401
Von Duprin 22, 33, 9927 Bottom latch.
Used to replace the bottom latch on the Von Duprin 2227, 3327A, and 9927 on devices shipped after October 1998.
Includes screws and sometimes the bracket
Von Duprin Part # 050401
G050401 -
Von Duprin 2227 Bottom Latch 050090
The Von Duprin 2227 Bottom Latch 050090 replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120 -
Von Duprin 2227 Top Latch 050091
The Von Duprin 2227 Top Latch 050091 latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G22VR10 -
Von Duprin 9927 Top Latch 050091
The Von Duprin 9927 Top Latch 050091 used on all the Von Duprin 9827 and 9927's. Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Von Duprin 6000 Series Solenoid Kit
The Von Duprin 6000 Series Solenoid Kit is used to replace burnt out solenoids on there 6000 series. To order determine the voltage and whether you have fail safe or fail secure.
Part # 050237 12 VDC (Fail Safe & Fail Secure)
Part # 050239 16 VDC (Fail Safe & Fail Secure)
Part # 050240 24 VDC (Fail Safe & Fail Secure)G0502xx -
Von Duprin Strike 1409 Blade Stop
The Von Duprin Strike 1409 Blade Stop is used on just about every Von Duprin Rim Device when door frame protection is needed. We see this strike on many Narrow Stile door setups. The strike measures 1-7/8" by 1-3/4" outside dimension. The strike has a projection of 1/2". The strike is constructed die cast metal and the blade is made of stainless steel.
Von Duprin Part # 1409
1409 -
Von Duprin 8827-F Top Latch Cover Kit 050465
The Von Duprin 8827-F Top Latch Cover Kit 050465 the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted position.
Von Duprin Part # 050465
Old Part # 96120688VR30F -
Von Duprin 8827 Bottom Latch Case 050461
The Von Duprin 8827 Bottom Latch Case 050461 is used on all Von Duprin 8827 non fire rated exits. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. Included mounting screws.
Von Duprin Part # 050461
Old part # 10175188VR170 -
Von Duprin 8827 Top Latch Case 050460
The Von Duprin 8827 Top Latch Case 050460 is for non fire rated doors. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. This is the part that may be causing your bottom latch to drag on the floor. The Top Latch does all the work on the Von Duprin 8827. When the Top Latch is retracted, it holds the rods in the retracted position.
Von Duprin part # 050460
Old Part # 10175088VR10 -
Von Duprin 88 Lever Arm Left Hand 050439
The Von Duprin 88 Lever Arm Left Hand 050439 replacement lever arm for all the Von Duprin 88 exit devices. Usually replaced due to the dogging screw stripping out. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.
Von Dupin part # 050439
Old Part # 10072988R70-
