Search results for: 'door series 30 push bar panic exit devic parts'
- Related search terms
- door series push bar panic exit dor cal parts 1307
- exit door panic devicemo square screw parts 1307
- exit door panic devicemo square screws parts Store room function 1308
- door series 30 push bar panic exit deep parts 1309
- exit door panic devices square screw parts 1317
- exit door panic devic square screws parts 1317
- exit door panic device square screw parts 1317
- door series 30 pull bar panic exit deep parts 1308
- door o matic 1 panic device 1309
- dooramatic door series 30 push bar panic exit devic parts 1314
-
Jackson Panic Device 20-1266 2085/2095 End Cap
Jackson Exit Device 2085/2095 End Cap
The Jackson Exit Device 2085/2095 End Cap measures 3-1/8" high, by 1-1/8" wide, and has a projection of 1-15/16". The mounting lugs are 1-3/8" on center and project out 1".
Jackson Part Number 30-1266-628 Aluminum
Jackson Part Number 30-1266-313 Dark BronzeG301266- -
Dor-o-Matic EL1490 Panic Device
Doromatic EL1490 Exit Device with Electric Latch Retraction
The Doromatic 1490 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1490 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Replacement parts are also available
Shipped with all screws and strikes.
EL1490EO -
Dor-o-Matic 1690 Panic Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of the page.
1690EO -
International Door Closer 8610S Rim Device-Grade 1
International 8610S Rim Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
8610S- -
Monarch 19-R Exit Panic Device
Monarch 19-R Exit Panic Device
- Hand: Non-Handed.
- Functions: All functions built into “EO” device.
- Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313; Stainless Steel-US32D
- Latchbolt: Stainless steel, 3⁄4" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Stock Sizes: 3'0" and 4'0"
- Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
- Projection: 2-1⁄2" maximum; 1-7⁄8" dogged.
36" device is only 33-1/2" wide
48" device is only 43-1/2" wideG19EO- -
International Door Closer 8630S SVR Device-Grade 1
International 8630S Surface Vertical Rod Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
For doors 29" to 36" wide order the Size 30 to 36"
For doors 36" to 48" wide order the Size 48"8630S- -
Jackson Panic Device 1095 Active Housing
The Jackson Panic Device 1095 Active Housing is the working side of the 1095 panic hardware. The housing comes will all the internal parts, including the latch bolt. The distance between the mounting studs on this case is 6-5/16". Jackson part # 30-988 Right Hand Body, and part # 30-989 Left Hand Body
Left Hand Housing shown in the aluminum finish.
G1095xx -
Von Duprin 33A Panic Device Only
Von Duprin 33A Exit Device Only
33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 35A has a smooth mechanism case and the 33A has grooved case. 33A/35A fits door stiles as narrow as 1 3/4". Newly designed device has a one piece center case cover.
33AEO -
Von Duprin 55EO Panic Hardware
The Von Duprin 55EO Rim Exit Device is used primarily on aluminum framed glass doors, otherwise known as Narrow Stile Doors. It is one of the most heavy duty cross bar devices made, and has been in production since at least the 1970's. It will fit on Stile widths of 1-3/4", and ships with all the mounting screws, dog key and the 1409 Surface Strike. The device is also non handed.
55EO- -
Push Bar Adjustable 452
Push Bar Adjustable 452
Finishes:
US26/625 polished chrome
US26D/626 brushed chrome
US3/605 polished brass
US4/606 brushed brass
US5/609 antique brass
US10/612 brushed bronze
US10B/613 dark bronzeMaterial: Brass
Material Size: 5/8" round tube adjustable to 36"
Base: 5/8" x 8-1/2"
Clearance: 1/2"
Projection: 1-1/8"452- -
Von Duprin Panic Device 230L Lever Trim
The Von Duprin Panic Device 230L Lever Trim will work on the 22 and 2227 series exit devices. In 2008 this lever was redesigned and went from a key in the lever to the new style which has the key above the lever. The plate measures 3" wide by 6-3/8" high and is 15/16" thick. This lever only comes in sprayed aluminum or dark bronze. We also have replacement parts for this particular trim piece in stock, email us under the contact tab at the top of the page.
Cylinder not included
22L -
Monarch / Falcon 25-R Series Rim Panic Device | Panic Hardware
Monarch / Falcon 25-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2" dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time25EO- -
Push Bar W/Offset Grip PP-2000
The Push Bar W/Offset Grip PP-2000 is what we usually find on most aluminum framed glass store front doors. This particular set can usually ship within 24 hours, and comes in grip sizes of 9", 10" and 12" centers. The push bar has 33-1/16" centers. It is constructed of 1" solid aluminum that is anodize clear (aluminum) or dark brown. It ships with all of the hardware needed for an 1-3/4" thick door. At this time we are not able to sell the fasteners separately.
PP-2000 -
Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117
The Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117 is a replacement for the Screw Driver Headed Dogging Pin. Now instead of using a screw driver you can use the handy thumb piece instead. The package comes with new set screw, spring, and of course the pin. Jackson part number 30-1117.
G108554TP -
Monarch 19 Series End Cap Bracket
Monarch 19 Series End Cap Bracket
This steel bracket holds the hinge side of the panic bar on the door. The end cap then fits over it for a finished look. Bracket measures 1-5/8" tall by 1-1/4" wide with a 15/16" projection. Sometimes shipped with a mounting barrel nuts and screw.
Monarch Falcon Part # 650320 or old part # 600108
G19R100B -
Sargent Exit Device 80 Series Plastic End Cap And Bracket
Sargent Exit Device 80 Series Plastic End Cap And Bracket
includes the end cap, bracket and mounting screws. This plastic end cap always breaks. You might want to consider trying the new impact resistant end cap shown in the related products, on the right hand margin of the page.
Used on the Sargent 80 Series Exit Devices
Part #'s 68-0561, 68-0511 and 97-0052
G80300 -
Jackson Panic Device 1095 Standard Strike
The Jackson Panic Device 1095 Standard Strike is a strike they have been using for the past 20 years. You might have one of the older roller strikes, but this will work in its place. The older style roller strike is no longer available. Jackson Exit Device part # 30-2436.
G109556 -
Yale 2100 Panic Device
Yale 2100 Exit Device
Door Opening Width:
-36 for 30" - 36" (76.2cm - 91.4cm) doors, Actual width is 31-3/4"
-42 for 36" - 42" (91.4cm - 107cm) doors, Actual width is 37-3/4"
-48 for 36-1/2" - 48" (92.7cm - 121.9cm) doors, Actual width is 43-3/4"
Door Thickness: 1-3/4" (44mm) standard.
Minimum Stile Width: 4-1/2" (114mm)
Projection: 2-1/2" (64mm) active, 1-3/4" (44mm) depressedAluminum is in stock, Dark Bronze has a 2 week lead time
2100EO- -
Falcon 25-V Vertical Rod Panic Device
Falcon 25-V Vertical Rod Panic Device
The Monarch Falcon 25-V is designed for high-traffic applications were added strength and durability are required. The device includes all strikes and mounting screws required for installation. Available in 3' and 4' devices, the 3' device is for doors 30" to 36", the 4' device is for doors that are 37" up to 48" wide. The vertical rods furnished with this device are for doors up to 7' tall, if your doors are taller, please contact us.
G25VEO- -
Adams Rite EX88 Rim Panic Device
The Adams Rite EX88 Interlocking Rim Exit Device is designed for heavy duty use on narrow stile aluminium door applications. The EX88 has a unique latch bolt design that interlocks with the frame of the door. This device is non handed, requires a minimum stile width of 2" and will work on aluminum, hollow metal or wood doors.The device is constructed of extruded aluminum with matching metal angled end caps. To order specify your door width, and the color.
EX88- -
Jackson Panic Device 2085 Dogging Assembly LH/RHRB
Jackson Exit Device 2085 Dogging Assembly LH/RHRB
This Jackson Exit Device dogging assembly is used on the 2085 Device made after October 1, 1999. It will work on the previous version of this exit device, but you may have to use a file a remove some material from the catch.
Jackson Part # 30-2462
This spring would be for the Device on the Right, shown below.
G302462 -
Falcon / Dor-o-Matic MEL1690 Panic Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Replacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
Dor-o-Matic 1990/2090 Cross Bar CBAR
The Dor-o-Matic 1990/2090 Cross Bar CBAR is used on the 990, 1090, 1990 and 2090 Dor-o-Matic and Falcon panic hardware. The bar is 41" and 48" long and is easily cut in the field with a chop or hack saw. The bar is constructed of extruded aluminum and then anodized to the correct finish. The slot where the screw threads in is not threaded, but the screws, sold separately, are thread forming screws. The 41" bars are in stock, the 48" bars have a 3 week lead time
The Dark Bronze Cross Bars are a very dark bronze and will be closer to black.
Doromatic part # CBAR/ 47285197 for the 41" bars, and 47286482 for the 48" bars.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199039 -
Push Bar 1' Diameter 422
The Push Bar 1' Diameter 422 can be used on any door, but is usually found on aluminum framed glass store front doors. They are constructed of 1" diameter solid aluminum, stainless steel, bronze or brass depending on your select finish. The bar has a 2-1/8" projection and 1-1/8" clearance. The push bar ships with thru bolts and finish washer in matching finish. Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.
422 -
Dor-o-Matic 1690/1990 Top Rod-PB24
Dor-o-Matic 1690/1990 Top rod. Connects panic bar to the bottom latch
Doromatic Part # 4270100017 PB24
Select the height of your door for the correct rod.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199024T- -
Monarch 19-V Exit Panic Device
Monarch 19-V Exit Panic Device
- Hand: Field reversible.
- Functions: All functions built into “EO” device.
- Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
- Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Stock Sizes: 3'0" and 4'0"
- Doors: 13⁄4" thick, wood or metal.
- Narrow Stile Doors: To 1-3⁄4" N.S. aluminum. With control trim–2-1⁄4" min. stile.
- Projection: 2-1⁄2" max., 1-7⁄8" dogged.
G19VEO- -
Von Duprin 8827 Panic Hardware
Von Duprin 8827 surface mounted vertical rod devicesfor all types of single and double
doors, UL listed for accident hazard installations.Covers stock hollow metal doors
with 86 or 161 cutouts and fits door stiles as narrow as 3½" (90mm).- Fully reversible
- Five popular finishes
- Field sizeable
- Hex key dogging
- 5/8"(16mm)throw latch bolt
Ships with all mounting screws and the 299, 304L and 248L-4 Strikes.
8827EO- -
Monarch / Falcon 24-R Series Rim Exit Device
Monarch / Falcon 24-R Series Rim Exit Device
Robust and aesthetically pleasing, the Falcon 25 Series exit devices provide you a full range of functions and are able to fit narrow and wide stile door types. Falcon is focused on providing you solid products with solid performance at a solid price. The sleek architectural design is perfect for a variety of applications to assure every door opening provides safe egress while also integrating with the overall building design. Combining functionality and design allows you to have confidence that your exit device is built to last and will look great - all at an affordable price.
- Hand: Non-handed.
- Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN. - Strikes: 299 strike standard.
- Latchbolt: Stainless steel, 3⁄4" throw.
- Deadlocking Latchbolt: Standard.
- Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
- Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
- Projection: 2-3⁄4" maximum, 2” dogged.
- Mounting Height: 40-1⁄4" from CL to finished floor.
- Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard. - ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
- Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.
Call for pricing on non listed finishes
2 week lead time24EO--