Door Closers

At RBA Door, we offer a wide range of high quality door closers, assemblies and accessories. Our door closers and door closing accessories are perfect for “high-traffic” commercial uses in schools, universities, churches, YMCA, offices, business, warehouses and exhibit halls. We also feature low-power door closers perfect for those with limited mobility. Our products are the ideal solution to maintain a first point of building security and to reduce energy consumption in climate controlled areas..

View as Grid List

Items 37-72 of 233

per page
Set Descending Direction
  1. International Door Closer 5001P Series Adjustable Spring Power

    The International Door Closer 5001P Series Adjustable Spring Power is a great closer to use as a replacement for the many 3/4" by 12" mounting holed closers.  This door closer is fully adjustable with sweep, latching and back check adjustments, a long with an adjustable spring tensoin control.  This closer can be adjusted to less then 8-1/2" pounds of resistance to meet ADA standards.  You can install this closer on the push, pull or top jamb, we ship the regular arm and a parallel arm bracket.  This closer has the same mounting holes as the Norton 8000 and Yale 3000 door closers.

    Hole spacing 3/4" x 12"

     

    Door Closer Stop Colors

    5001-
    As low as $153.41
  2. International Door Closer 8051-TP Series

    The International Door Closer 8051-TP Series is an ideal replacement closer for just about any Store Front Door. We recommend this closer because it will fit any size door, and you can adjust the spring tension to make it easier for the elderly, smaller children and the handicapped. The 8051 will work in interior or exterior doors, and will meet ADA codes.  This door closer will work on a Right or Left Hand Door, Push or Pull side or Top Jamb mounting, it ships with a parallel arm bracket, arm and mounting screws along with a full plastic cover.   We ship the 8051-TP DU or 8051-TP AL depending on the color you choose.  Length of Closer is 9-3/4”, Horizontal Mounting Holes 9-1/16”, Vertical Mounting Holes 3/4”, overall height is 4-21/32” with height of l1-21/32”, and projects  2-29/32” from the door face.    The 4 adjustment valves are Closing and Latching Speed, Power and Back Check.

    Door Closer Stop Colors

    8050-
    As low as $112.51
  3. International 8052-TP Delayed Action Door Closer

    International 8052-TP Delayed Action Door Closer

    The International 8052-TP Delayed Action Door Closer is same  as the 8050 Series or 8051-TP, but with Delayed Action. Delayed Action is a function of the Door Closer hydraulic cylinder. The hydraulic cylinder will hold the door open for up to 30 seconds to allow physically challenged individuals time to get through the door way. Adjustable spring power with separate valves for closing, latching and delay

    International Door Closer model # 8052-TP DU or 8052-TP AL

    p>

    Door Closer Stop Colors

    8052-
    As low as $127.12
  4. International Door Closer 9001-TP Series

    The International Door Closer 9001-TP Series is a relatively newer closer.  This closer features fully adjustable spring tension, closing and latching speeds and back check.  The narrow design allows for mounting on the top jamb of store front doors without a drop plate.  The closer is non handed, and can be mounted on the push, pull  or top jamb positions.  It meets all ADA requirements and is a Grade 1 closer, the heaviest rating possible.

    3/4" X 11-3/32" Hole Spacing

    Door Closer Stop Colors

    9001P-
    As low as $110.25
  5. International Door Closer 44CI Adjustable Spring Power

    The International Door Closer 44CI Adjustable Spring Power is one of there heaver duty closers.   It is designed to line up with the LCN 4040 hole spacing at more than half the price.  It features a rugged cast iron body with a forged steel arm.  It also uses all weather fluid, is non handed and is non sized, meaning you can adjust the door for any size door.  The door closer we are selling here come with a regular arm and parallel arm bracket, so the closer can be mounted on the left or right, push, pull or top jamp.  The closer has 4 adjustments, closing, latching, and back check valves, a long with a spring power adjustment.

    Door Closer Stop Colors

    44CI-
    As low as $182.64
  6. Norton Door Closer 1601

    The Norton Door Closer 1601 has been around for the past 40 years.  With the advent of aluminum framed glass doors, Norton was on for the first manufactures to come up with a narrow stile door closer.  Because of this, it is still one of the most popular door closer model out there.  It is a Grade 1 closer and has adjustable closing, latching, and back check speeds.  The model we ship also has adjustable spring tension to work on a wider range of doors.  The hole spacing is 3/4” x 9-1/16”.

    Older models may be stamped with Scoville or Eaton, which are the companies that used to own Norton.  We sometimes find 20-1624-4001, or 20-1604-4001 stamped on the back of the closer. If your door closer is stamped 20-1603-4001 or 20-1623-4001, you might want to double check the hole spacing. The 20-1603-4001 usually has a hole spacing of 3/4" x 8-3/16", you could use the International Door Closer 853 as a replacement.

    Door Closer Stop Colors

    1600-
    As low as $160.47
  7. Norton Door Closer 1601BF Barrier Free

    The Norton Door Closer 1601BF Barrier Free has been around for about 10 years. With the advent of aluminum framed glass doors, Norton was one of the first manufactures to come up with a narrow stile door closer. Because of this, it is still one of the most popular door closer models out there. It is a Grade 1 closer and has adjustable closing, latching, and back check speeds. The Barrier Free version just means you can turn the spring tension down to a size 1 spring, which will meet the ADA codes (less than 5 pounds of resistance). The model we ship also has adjustable spring tension to work on a wider range of doors. The hole spacing is 3/4” x 9-1/16”.

    Norton 1600 Installation Instructions

    1600BF-
    As low as $160.47
  8. Norton Apollo Door Closer 7500

    The Norton Apollo Door Closer 7500 has been around for quite a long time, and was designed to replace the older 7700, which are still made. The beauty of the 7500 is that is can be mounted left or right, push, pull or top jamb, were as the 7700 you had to specify all those attributes, which made stocking them a head ache. This is a Grade 1 closer, and is extremely durable. If you are looking for a 7500BF, the barrier free version, the new 7500 is barrier free, and will do the trick. This closer has a 2-3/8" x 6-3/4" hole spacing.

    Door Closer Stop Colors

    7500-
    As low as $428.44
  9. Norton Door Closer 7700 Series Power Track

    The Norton Door Closer 7700 Series Power Track combine the functions of a single point electromechanical door holder with the proven reliability of a 7700 Series Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available with or without an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations or the frame soffit for push side installations.
    Two versions, the Master Unit (PTDO) and the Support Unit (PTO). The PTDO has an integral smoke detector. The PTO can be plugged into the PTDO or into your existing fire alarm system. Both units can be mount pull side of the closed door, or the push side, please specify when ordering. Specify voltage (24 volt or 120 volt) and color (aluminum or dark brown). Dark Brown is a 3 week lead time, Aluminum is in stock.

    Door Closer Stop Colors

    Supply Chains have really caused some issues on this door closer, we recommend calling or emailing to check the availability of this door closer.

    7705PT-
    As low as $952.08
  10. Norton Traditional Door Closer 78 B/D

    The Norton Traditional Door Closer 78 B/D is a door closer used in historic buildings.  This is a replica of the original cast iron door closer used from the 1920’s to 1960’s.  The new version is made of a cast aluminum alloy material, and should only be used when you are trying to keep historic designations.  The hole spacing on this closer is 1-3/8" x 4-1/4”.

    right hand left hand diagram

    Door Closer Stop Colors

    78B/D
    As low as $1,432.15
  11. Norton Door Closer 8301

    The Norton Door Closer 8301 is sometimes called the Omni Door Closer.  This door closer features a cast aluminum body, is a Grade 1 closer and has adjustable closing, latching, and back check speeds.  This closer is a non sized closer, meaning you adjust the spring tension to meet closing requirement for a ADA Barrier Free application all the way up to a 48” exterior door.  You cover might have 8301/8301BF 3301/3301BF, but the new version will cover the BF and non BF closers.  The difference between this closer and the 8501 is the size of the plastic cover.  The 8301 has a slim cover, and the 8501 has full cover.  The hole spacing on this door closer is 3/4” x 12”.

    Door Closer Stop Colors

    8301-
    As low as $244.76
  12. Norton Door Closer 8501

    The Norton Door Closer 8501 is sometimes called the Omni Door Closer.  This door closer features a cast aluminum body, is a Grade 1 closer and has adjustable closing, latching, and back check speeds.  This closer is a non sized closer, meaning you adjust the spring tension to meet closing requirement for a ADA Barrier Free application all the way up to a 48” exterior door.  You cover might have 8501/8501BF 3501/3501BF, but the new version will cover the BF and non BF closers.  The difference between this closer and the 8301 is the size of the plastic cover.  The 8301 has a slim cover, and the 8501 has full cover.  The hole spacing on this door closer is 3/4” x 12”.

    Door Closer Stop Colors

    8501-
    As low as $219.40
  13. Norton 9300 Door Closer-Discontinued

    Norton Door Closer 9300

    • Spring size 2, 3, 4, 5
    • Separate and independent valve for sweep speed and latch speed
    • Adjustable backcheck standard
    • Regular, top jamb, parallel mount
    • Friction hold open arm optional
    • UL listed and compliant with UL10C for positive pressure
    • 5-year limited warranty
    • ANSI/BHMA A156.4 Grade 3

    3/4" x 9-1/16" Hole Spacing

    In April of 2023 Norton Yale have discontinued the 2300 and 9300.  The Norton 1600 will be sent in place of the 2300.   Same Hole Spacing, but adjustable spring tension.

    9300-
    As low as $160.47
  14. Jackson 20330 Concealed Door Closer

    The Jackson 20330 Concealed Door Closer has been around since the late 1960's early 1970's.  They are used on aluminum framed storefront doors, that have a narrow stile (frame) around the glass.  The closer is tucked up in the header of the door frame.  Jackson has been a leader in this style of door closer for almost 50 years.   The closer is manufactured in the U.S.A. under strict ISO 9001 guidelines and is designed to give long lasting, maintenance-free performance. One basic closer mechanism allows for single or double acting, center-hung, or offset applications and is non-handed. The adjustable spring power makes this closer suitable for aluminum, wood or steel doors.

    Mechanism only, Spindle Length is 1/2"
    See Jackson arms for replacement arms.

    20330
    As low as $175.35
  15. Falcon / Doromatic Door Closer SC61

    The Falcon / Doromatic Door Closer SC61 is an affordable, higher quality, standard template closer.  This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension.  It has the ability to be mounted on the push, pull or top jamb and is non handed.  This closer is considered a Grade 1 closer, which is the highest grade you can get.  The hole spacing is 3/4” x 9-1/16”, which is the most common mounting template out in industry today.  They used to be know as the Doromatic SC60, but in about 2008, they changed it to the Falcon SC61.  We ship the SC61 Rw/PA.

    Door Closer Stop Colors

    SC60-
    As low as $161.00
  16. Falcon SC71 Door Closer

    The Falcon SC71 Door Closer used to go by the Doromatic SC71. This is a higher quality door closer at a more affordable price. This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension. It has the ability to be mounted on the push, pull or top jamb and is non handed. This closer is considered a Grade 1 closer, which is the highest grade you can get. The hole spacing is 2-3/8” x 6-3/4”, which is the same hole spacing as the Norton 7500 and Yale 4400 door closers. We ship the SC71 Rw/PA

    Door Closer Stop Colors

    SC70-
    As low as $276.86
  17. Falcon / Doromatic Door Closer SC81

    The Falcon / Doromatic Door Closer SC81 is an affordable, higher quality, standard template closer.  This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension.  It has the ability to be mounted on the push, pull or top jamb and is non handed.  This closer is considered a Grade 1 closer, which is the highest grade you can get.  The hole spacing is 3/4” x 12”, which is the same hole spacing as the Norton 8301, 8501 and the Yale 3301, 3501 Door Closers.  We ship the SC81 Rw/PA.

    Door Closer Stop Colors

    SC80-
    As low as $203.28
  18. Falcon / Doromatic Door Closer SC91

    The Falcon / Doromatic Door Closer SC91 is an affordable, high quality closer for residential or light commercial applications.  They used to be know as the Doromatic SC90, but in about 2008, they changed it to the Falcon SC91.  This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension.  It has the ability to be mounted on the push, pull or top jamb and is non handed.  This closer is considered a Grade 3 closer, which is the lightest grade you can get.   The hole spacing is 3/4” x 6-3/8”.  We ship the SC91 Rw/PA.

    Door Closer Stop Colors

    SC90-
    As low as $105.70
  19. Falcon Automatic Opener 8242

    The Falcon Automatic Opener 8242 is a smart and easy solution to improve accessibility and meet ADA Codes.  The 8242 is a non handed, surface mounted, 115 volt closer for a push side mounting.   If your door is an inswinging door you would use the 8231.   This self contained package features, an on board power supply, LED light on the control box to signal accurate installation and helps with connection diagnostics.  

    This closer features:
    SmartLatch-senses and overcomes external pressure conditions with a Graduated energy assist of secure latching.
    Push N Go-selectable feature allows door to open automatically as soon as it feels pressure.
    Open Position Learning-automatically sets the opening position to eliminate wall and door damage.
    Obstacle Obstruction Detection-safety feature stops and reverses door direction when distress or an obstruction is sensed.
    Pre-Load Strike Assist-removes load on strike lip with a one second delay allowing the door to release and automatically open.
    LED Light Illumination-Light illumination on control box signals accurate installation and helps with connection diagnostics.
    On Board Power Supply-powers the accessories without the need to install an external power supply-12 vac
    Adjustable hold open time delay, backcheck/latch position, backcheck speed, and opening and closing speeds.

    The package includes everything except for the actuators.  Uses LCN Actuators.

    Falcon 8200 Catalog

    Falcon 8200 Installation Instructions

    8242-
    As low as $1,988.58
  20. Falcon Automatic Opener 8231

    The Falcon Automatic Opener 8231 is a smart and easy solution to improve accessibility and meet ADA Codes.  The 8231 is a non handed, surface mounted, 115 volt closer for a pull side mounting.   If your door is an outswinging door you would use the 8242.   This self contained package features, an on board power supply, LED light on the control box to signal accurate installation and helps with connection diagnostics.  

    This closer features:
    SmartLatch-senses and overcomes external pressure conditions with a Graduated energy assist of secure latching.
    Push N Go-selectable feature allows door to open automatically as soon as it feels pressure.
    Open Position Learning-automatically sets the opening position to eliminate wall and door damage.
    Obstacle Obstruction Detection-safety feature stops and reverses door direction when distress or an obstruction is sensed.
    Pre-Load Strike Assist-removes load on strike lip with a one second delay allowing the door to release and automatically open.
    LED Light Illumination-Light illumination on control box signals accurate installation and helps with connection diagnostics.
    On Board Power Supply-powers the accessories without the need to install an external power supply-12 vac
    Adjustable hold open time delay, backcheck/latch position, backcheck speed, and opening and closing speeds.

    The package includes everything except for the actuators.  Uses LCN Actuators.

    Falcon 8200 Catalog

    Falcon 8200 Installation Instructions

    8231-
    As low as $1,988.58
  21. Falcon / Doromatic Door Closer 3077/PA Regular Arm Only

    Dor-o-Matic Falcon Door Closer Regular Arm Only. This is the standard regular arm for the SC60, SC70, and SC80 Doromatic Door Closers

    Doromatic Falcon part # SC60 - SC60-3077/PA, SC70 - SC70-3077/PA, SC80 - SC80-3077/PA

    DO3077
    As low as $105.70
  22. Falcon OHC100 and OHC101 Door Closer Body Only

    The Falcon OHC100 and OHC101 Door Closer Body Only are designed for a wide variety of Doors.   The OHC100 is for use on larger exterior doors and has spring size adjustments of 3-5.   The OHC101 is designed for smaller or interior vestibule doors, with an adjustable spring size of 1-3.

    OHC100-
    As low as $219.54
  23. Global Door Controls TC201 Door Closer

    The Global Door Closer TC200 is recommended for use on all aluminum store front doors, wood or hollow metal commercial applications. It is a versatile utility closer that provides narrow styling and has a full selection of accessories to accomodate the requirement of any field installation.

    In this series, our Global Door Closer TC201 is a multi-size spring model that offers adjustable power with a choice of range sizes 2-5 where high rates of closing force are required. Our TC201ADA model also offers adjustable spring power sizes 1-4 for use on interior doors requireing less than 5 lbs. of opening force and exterior doors requiring less than 8.5 lbs. This complies with ADA handicap codes and ANSI/BHMA standard requirements. Both models will retrofit most full size closers with a 9 1/16" industry standard hole patten to update any opening for code compliance.
    Hole Spacing is 3/4" x 9-1/16"

    Options: Specify when ordering:

    • Finish - AL, DU
    • Size 1-4 or 3-6
    TC201--
    As low as $94.19
  24. Global DoorTC4361 Door Closer

    The Global Door Closer TC4361 is recommended for use on heavy duty commercial, architectrual and institutional applications. It is ideal for business, new construction and renovations. It has a full selection of accessories to accomodate the requirements of any field installation. It is tri-packed standard and comes with all fasteners, brackets and soffit plates for versatility. Closers with non-hold open arms are UL listed for "A" label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards.

    Options: Specify when Ordering

    • Finish - AL, DU

    The hole spacing is 1" by 7-1/2"

    TC4361-
    As low as $156.78
  25. Corbin Door Closer 100/110/120

    The Corbin 100, 110 and 120 Door Closer are no longer available. They have been replaced by the DC6210, which has the same hole spacings and arm. You will not have to redrill or modify your door to make the DC6210 work in place of your existing 100, 110 or 120 door closers. The DC6210 has a little bit larger body due to the increased functionality of this closer. This new closer will meet all the ADA requirements.

    Corbin Russwin’s history combines high-quality product and innovative design. That tradition continues with the new Grade 1 DC6000 Series door closer, designed and engineered with quality features such as captured valves and a complete range of new arms. The DC6000 series is the perfect closer for high-use openings or openings that must meet ADA requirements, such as schools, office buildings, health care facilities, and retail complexes. The series also meets UL and UL10C positive pressure requirements for fire openings.
    Uses the same mounting bracket as the 100, and 2800 series.

    Older models may have SL72 or MS93 cast on the cylinders. You may also find Clarksdale, MS cast on the cylinder also.

    Door Closer Stop Colors

    DC6210b
    As low as $447.69
  26. Corbin Russwin Door Closer DC3210

    Corbin Russwin DC3210 Door Closer

    The mid-priced, cost-effective choice for high-traffic situations. Corbin Russwin DC3000 Series Door Closers fulfill security and life safety requirements by ensuring reliable latching for access control and fire code compliance, along with ease of operation and precise adjustability for barrier-free code compliance. Ideal for virtually all door openings and draft conditions in both new construction and renovations.

    Fits on the same mounting bracket as the 100, 110, 120, 2800, 2810 and 2820 Corbin Russwin Door Closers

    Idea for interior doors.

    Door Closer Stop Colors

    DC3210-
    As low as $344.73
  27. Corbin Russwin Door Closer DC6210

    Corbin Russwin DC6210 Door Closer

    Corbin Russwin’s history combines high-quality product and innovative design. That tradition continues with the new Grade 1 DC6000 Series door closer, designed and engineered with quality features such as captured valves and a complete range of new arms. The DC6000 series is the perfect closer for high-use openings or openings that must meet ADA requirements, such as schools, office buildings, health care facilities, and retail complexes. The series also meets UL and UL10C positive pressure requirements for fire openings.
    Uses the same mounting bracket as the 100,110, 120 and 2800, 2810 and 2820 series and also the , DC220, DC2400, and DC2600

    Older models may have SL72 or MS93 cast on the cylinders.
    You may also find Clarksdale, MS cast on the cylinder also.

    Door Closer Stop Colors

    DC6210--
    As low as $447.69
  28. Russwin Door Closer 2800/2810/2820

    The Russwin 2800, 2810 and 2820 are no longer available. They have been replaced by the Corbin Russwin DC6210, which has the same hole spacings and arm. You will not have to redrill or modify your door to make the DC6210 work in place of your existing 2800, 2810 or 2820 door closers. The Corbin Russwin DC6210 has a little bit larger body due to the increased functionality of this closer. This new closer will meet all the ADA requirements.

    Corbin Russwin’s history combines high-quality product and innovative design. That tradition continues with the new Grade 1 DC6000 Series door closer, designed and engineered with quality features such as captured valves and a complete range of new arms. The DC6000 series is the perfect closer for high-use openings or openings that must meet ADA requirements, such as schools, office buildings, health care facilities, and retail complexes. The series also meets UL and UL10C positive pressure requirements for fire openings.
    Uses the same mounting bracket as the 100, and 2800 series.

    Older models may have SL72 or MS93 cast on the cylinders. You may also find Clarksdale, MS cast on the cylinder also.

    Door Closer Stop Colors

    DC6210a
    As low as $447.69
  29. Corbin Russwin Door Closer DC8210

    Corbin Russwin DC8210 Door Closer
    Applications
    High-quality products and innovative designs are the foundation for the long
    history and reputation of Corbin Russwin Architectural Hardware. That tradition
    continues with the Grade 1 DC8000 Series door closer, the perfect choice for
    high-use openings and doors that must meet ADA requirements. A variety of
    arms, finishes and quality features make the easy-to-install DC8000 ideal for
    schools, office buildings, health care facilities and retail complexes.

    DC8210-
    As low as $508.88
  30. Cal Royal Products 300 Series Door Closer | 300-PCOV

    The Cal Royal Products 300 Series Door Closer comes in two versions.   One version is the size 3 to 6 spring, which would be for larger exterior doors.  The 3 to 6 spring size is for doors 36" to 48" wide.  The second version is the size 1 to 4 spring size.  The 1 to 4 is considered a Barrier Free door closer, because the spring tension can be turned down to less than 8 pounds of resistance, making the door easy to open.  The 1 to 4 should be used on interior doors and smaller, less than 36" wide exterior doors.  This door closer is a standard template closer with a hole spacing of 3/4" x 9-1/16" center to center, which is what we find on many aluminum framed glass storefront doors.   This closer has a 5 year warranty and is considered a Grade 1 closer, the heaviest duty rating possible.

    Door Closer Stop Colors

    300P-
    As low as $94.97
  31. Cal Royal Products 400 Series Door Closer | Economical Door Closer

    The Cal Royal Products 400 Series Door Closer is for lighter use interior doors.  This closer is considered a Grade 2, which means it is only rated for 1,000,000 cycles.  The 400 Series is a sized closer, meaning you can not adjust the spring tension, the spring size you select is what you get.  Also, make sure to note the hole spacing of the various sizes below.  These closers also offer adjustable closing and latching speeds.

    Size 420 3/4" x 6-5/8" hole spacing
    Size SM 430P 3/4" x 6-1/2" hole spacing
    Size 430P 3/4" x 8-3/16" hole spacing
    Size 440P 3/4" x 8-3/16" hole spacing

    Cal Royal 400 Series Catalogue

     

    Door Closer Stop Colors

    400P
    As low as $58.44
  32. Cal Royal Products 700 Series Door Closer

    Cal Royal 700 Series Door Closer

    Adjustable closing and latching speeds
    holes spacing  is 3/4" x8-3/16" for sizes 2 and 3, and 3/4 x 9-1/16" for the size 4.   Size 2 is ideal for reduced power on interior doors, size 3 will be more powerful.   Word of warning, the larger the spring size the harder it is to open the door.
    Powder Coated Painted Finishes

    5 year warranty

    Door Closer Stop Colors

    720-
    As low as $58.44
  33. Cal Royal Products 800 Door Closer

    The Cal Royal Products 800 Door Closer is one of there newer closers.  The CR801 has a hole spacing of 3/4" x 12" and ships with either a full cover or slim cover.  The full cover will hide both spindles, were as the slim cover will not.  This closer is a Grade 1 closer, the heaviest rating possible.  The cylinder has adjustable spring tension, closing, latching and back check speeds.   It can be mounted on the push, pull or top jamb.  The CR801 will work in place of the Norton 8000 and Yale 3000 series door closers, with no new drilling. 

    CR801S - SLIM COVER

    CR801 - FULL COVER

    Ships within 24 hours from California.

    Door Closer Stop Colors

    CR800-
    As low as $131.94
  34. Cal Royal Products 900 Series Door Closer

    The Cal Royal Products 900 Series Door Closer is a unique one, it is the only closer that has the 3/4" x 11-1/8" hole spacing.  We have seen a few versions of this closer, some have 6 mounting holes, and some have 4.  If your closer has a spacing of 11-1/8", and has 3 holes on each size, this is the only closer I know of that is like that.  The 900 Series is a Grade 1 closer, the heaviest duty rating possible.  The door closer has adjustable spring tension, closing, latching and back check valves and is Barrier Free rated.  The package comes with all of the  mounting screws and a parallel arm bracket, so it can be mounted on the left, right, push, pull or top jamb for mounting.

    Door Closer Stop Colors

    900P-
    As low as $138.81
View as Grid List

Items 37-72 of 233

per page
Set Descending Direction