Parts | Jackson Exit Device
Check out our selection of top-notch panic device replacement parts made by reputable manufacturers. Whether you are maintaining a high-traffic building or upgrading for code compliance, having the right panic device hardware and components on hand makes the job faster and more reliable. Our inventory includes replacement cylinders, dogging parts, strike plates, end caps, cover screws, and more—compatible with many popular brands and models.
When you purchase panic devices from RBA Door, every product will meet local building codes as well as your expectations for performance and quality. All panic device hardware and accessories are built with durability, convenience and value in mind. No matter the project, the panic device replacement parts in our inventory are a well-built choice at a reasonable price. We provide trusted, speedy shipping, so you can receive your panic device hardware on time.
Find the Right Panic Device Replacement Parts Online
We offer a range of panic device replacement parts and accessories to keep your devices functioning optimally. Regular maintenance is key to ensuring long-lasting performance, and we can provide you with the resources you need to keep everything in top shape.
We carry panic device hardware for single, double, and glass doors. We also have panic device replacement parts for devices that have been discontinued. The style of panic device hardware you order will depend on which devices are or will be installed on the doors of your space.
Some of the panic device replacement parts in our inventory come in different sizes such as hex keys or dog keys. One size we carry is the 3/16” Panic Hex Key while it also comes in 7/32”, 5/32”, ⅛”, and more sizes. Be sure to check the brand and make sure it matches the device you are using. We also have the Adams Rite Panic Device Dog Key. This panic device replacement part #25-0480 is used on Adams Rite’s older models. It is constructed of high density plastic.
From hex keys to brackets, and springs to end caps, we have an assortment of panic device replacement parts to keep you prepared for your next installation or repair. Keeping a few common items on hand—like keys, springs, screws, and end caps—can also save time when you are working on service calls or last-minute repairs. When you are replacing worn parts or stocking up for future projects, our selection of panic device hardware makes it easy to find what you need. Browse our inventory to locate the right panic device hardware for your application and keep your device operating smoothly and securely.
Selecting the Correct Panic Device Parts for Your Project
Whether you are replacing a worn component or stocking parts for ongoing maintenance, RBA Door makes it easy to find the right fit. Our selection includes parts for rim, mortise, and vertical rod devices, along with trim, end caps, dogging components, strikes, and mounting hardware. Each item is clearly listed so you can match the part to your device and get your door back in service quickly.
To identify the correct parts, start by checking the manufacturer and model number on the device. This information is usually stamped on the push bar, the end cap, or the inside of the chassis. If the label is missing, you can still narrow it down by noting the device style (rim, mortise, or vertical rod), door type (metal, wood, or glass), and whether the opening is single or pairs.
Once you know what you have, you can order only what you need—such as a replacement latch, new end caps, a strike, or a complete retrofit kit. If you are unsure, our team can help you confirm compatibility before you buy, so you avoid delays and keep your exits compliant and working smoothly.
Are you unsure of what you need? Search by part name, device type, or manufacturer, and check the product descriptions for sizing and fit details. If you have questions, our team can help you identify the correct part so your device operates smoothly and safely. Don’t forget to check out our website for helpful articles and videos that can assist you in maximizing the benefits of your panic device hardware.
Contact Us with your Panic Device Hardware Inquiries
Do you need help identifying panic device hardware? Contact our team with your device brand, model, and photos of the area you are repairing. We will help you confirm compatibility so you can order with confidence. With competitive pricing and fast shipping, RBA Door is your source for dependable panic device hardware when reliability matters most.
We are happy to help you place your online order today! Call or email us with your panic device hardware questions so you can get started on your project right away.
-
Jackson Panic Device Top Bolt Guide Assembly 1085/1285/2086
The Jackson Panic Device Top Bolt Guide Assembly is used on the 1085, 1285, and 2086 hardware. The piece works by sliding over the top rod when the device is opened. This keeps the rods retracted until the Plunger hits the Trip Assembly when it is closing. Upon hitting the Trip Assy, the plate slides over and the rods retract. It measures 1-1/2” deep x 1-1/16” wide x 15/16” tall, with a hole spacing of 3/4" on the mounting screws. Assembly includes the mounting screws. The Jackson Part number is 30-934.
G108518 -
Jackson Panic Device 1085 And 1095 Dogging Pin
The Jackson Panic Device 1085 And 1095 Dogging Pin is the piece that keeps the hardware in the open position during business hours. It is activated by pressing the crossbar and then turning the flat head screw driver head. The pin is held in the housings with a screw, which is located on the back of the housing. This pin has been used since about 1988 or so, the old style are no longer made, but they had a roll pin that was used to hold it in place. This package comes with a new spring, set screw and the pin. The Jackson part number on this is 30-1115.
G108554 -
Jackson Panic Device Mounting Stud 1085/1095
The Jackson Panic Device Mounting Stud is for use on the 1085 and 1095 panic hardware. Each door would have 2 on the left and 2 on the right, so a total of 4 studs per door. The housings fit over these studs and are held in place by an 1/8" set screw, there are two of these set screws at the top and one on the bottom. The threaded part has a 1/4-20 thread.G108544 -
Jackson Panic Device Crossbar 1085/1095
The Jackson Panic Device Crossbar is for use on the 1085 and 1095 hardware. The bar is 45" long and can be cut in the field with a chop saw or hack saw. There is a groove the entire length of the bar for added and strength and for the thread forming screws to thread into. The Jackson part number is 30-733-PKG, and it ships with the cross bar screws.
Jackson Part # 30-744PKG or 30744PKG
G108520- -
Jackson Panic Device Center Case 1085/1095
The Jackson Panic Device Center Case 1085/1095 is for use with the 1085 devices for both and left, and the inactive case of the 1095. Case is easily removed by loosening the two 1/8" Allen screws and one on the bottom. Includes everything in the housing. The distance between the mounting studs on this Case is 6-5/16"
Jackson part # 30-982 Right Hand Body and Arm Assembly
Jackson part # 30-983 Left Hand Body and Arm AssemblyHousing Shown in Aluminum
G1085XX -
Jackson Panic Device 1095 Active Housing
The Jackson Panic Device 1095 Active Housing is the working side of the 1095 panic hardware. The housing comes will all the internal parts, including the latch bolt. The distance between the mounting studs on this case is 6-5/16". Jackson part # 30-988 Right Hand Body, and part # 30-989 Left Hand Body
Left Hand Housing shown in the aluminum finish.
G1095xx -
Jackson Panic Device 1095 Standard Strike
The Jackson Panic Device 1095 Standard Strike is a strike they have been using for the past 20 years. You might have one of the older roller strikes, but this will work in its place. The older style roller strike is no longer available. Jackson Exit Device part # 30-2436.
G109556 -
Jackson Panic Device Top Bolt Trip 1085/1285/2086
The Jackson Panic Device Top Bolt Trip is for use on the 1085, 1285, and 2086 devices. The 30-824 Trip Assembly mounts on the jamb stop and has a pin that sticks out of it (actually a threaded set screw). The pin lines up with the release plate on the Top Bolt Guide Assembly, when the pin hits the top plate as the door closes, it releases the rods, so they can extend.
G108558 -
Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117
The Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117 is a replacement for the Screw Driver Headed Dogging Pin. Now instead of using a screw driver you can use the handy thumb piece instead. The package comes with new set screw, spring, and of course the pin. Jackson part number 30-1117.
G108554TP -
Jackson 1085 30-1242 / 30-1243 Lever Arms
The Jackson 1085 30-1242 / 30-1243 Lever Arms are for use with the Jackson 1085 Housings, both sides. And the Jackson 1095 Inactive (hinge side) Housings. To determine hand, stand inside and look out the door, what is side is the arm on? If it is on the Right then order Right.
G10852x -
Jackson 1095P Paddle Panic Hardware
The Jackson 1095P Paddle Panic Hardware is an alternative to the cross bar or push pad style panic hardware. The device is the same as the Jackson 1095, but with a paddle instead of the cross bar. This device is for use on aluminum or steel doors only. The device is mounted on surface studs that are tapped into the door. On a wood door they will pull out.
Right Hand Reverse Shown
1095P- -
Jackson Panic Device 1295 Push Pad End Cap Package
Jackson Panic Device 1295 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2677
New Jackson Part # 30-2654G302677- -
Jackson Panic Device 1285 Push Pad End Cap Package
Jackson Panic Device 1285 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2661
New Jackson Part # 30-2652-628 or 30-2652-313G302661- -
Jackson 30-2674 1285/1295 Cover Package
Jackson 30-2674 1285/1295 Cover Package
Jackson part # 30-2674-313 and 30-2674-628 Cover Plate for use on the 1285 and 1295 devices.. Plates measure 2-11/16" x 7-1/2 and 2-11/16" x 2-1/8", two plates in each package.
Jackson Part #'s 30-2674-313 and 30-2674-612
G302674- -
Jackson Panic Device 2085 Dogging Assembly LH/RHRB
Jackson Exit Device 2085 Dogging Assembly LH/RHRB
This Jackson Exit Device dogging assembly is used on the 2085 Device made after October 1, 1999. It will work on the previous version of this exit device, but you may have to use a file a remove some material from the catch.
Jackson Part # 30-2462
This spring would be for the Device on the Right, shown below.
G302462 -
Jackson Panic Device 2085 Dogging Assembly RH/LHRB
Jackson Exit Device 2085 Dogging Assembly RH/LHRB
This Jackson Exit Device dogging assembly is used on the 2085 Device made after October 1, 1999. It will work on the previous version of this exit device, but you may have to use a file a remove some material from the catch.
Jackson Part # 30-2467
This spring would be for the Device on the Left, shown below.
G302467 -
Jackson Panic Device 20-1266 2085/2095 End Cap
DISCONTINUED 1-1-2025 a few more Dark Bronze left
Jackson Exit Device 2085/2095 End Cap
The Jackson Exit Device 2085/2095 End Cap measures 3-1/8" high, by 1-1/8" wide, and has a projection of 1-15/16". The mounting lugs are 1-3/8" on center and project out 1".
Jackson Part Number 30-1266-628 Aluminum
Jackson Part Number 30-1266-313 Dark BronzeG301266- -
Jackson Panic Device 1285/1295 Dogging Assembly 30-2670
Jackson Exit Device 1285/1295 Dogging Assembly. The mounting plate measures 1-1/8 x 2 inches, with a hole spacing of 1/2 x 1-5/8 inches.
Package includes 4 screws, bracket and dogging bracket. Uses 1/8" dog key, our part # 88R6018
Same dogging assembly as the Kawneer 133636 for use on the 1686 and 1786
Jackson part # 30-2670
G302670
